Configurer VPN client sur un pix501 cisco

Configurer VPN client sur un pix501 cisco - Réseaux - Systèmes & Réseaux Pro

Marsh Posté le 22-10-2011 à 14:52:58    

Bonjour tout le monde
voila je viens vers vous pour savoir si quelqu'un pourrais m'aider à configurer mon PIX 501 pour réaliser un vpn client.
la version de mon PIX est la 6.3
j'utilise un client vpn version 5.0.4
 
la config que j'ai mis sur le pix est la suivante :
 
negociador# sh run
: Saved
:
PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname negociador
domain-name tsevpn.com
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list 101 permit ip 10.1.1.0 255.255.255.0 10.1.2.0 255.255.255.0
access-list 102 permit ip 10.1.1.0 255.255.255.0 10.1.2.0 255.255.255.0
access-list 120 permit icmp any any
pager lines 24
logging buffered debugging
mtu outside 1500
mtu inside 1500
ip address outside L4ip de ma box 255.255.255.0
ip address inside 10.1.1.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool vpnpool1 10.1.2.1-10.1.2.254 mask 255.255.255.0
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list 102
nat (inside) 1 10.1.1.0 255.255.255.0 0 0
access-group 120 in interface outside
rip inside default version 1
route outside 0.0.0.0 0.0.0.0 passrelle de ma box 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set ESP-AES-SHA esp-aes-256 esp-sha-hmac
crypto dynamic-map outside_dyn_map 10 set transform-set ESP-AES-SHA
crypto map outside_map 10 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
isakmp enable outside
isakmp identity address
isakmp nat-traversal 20
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption aes-256
isakmp policy 10 hash sha
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
vpngroup tsevpn address-pool vpnpool1
vpngroup tsevpn dns-server 212.27.40.240 212.27.40.241
vpngroup tsevpn default-domain vpntse.com
vpngroup tsevpn split-tunnel 101
vpngroup tsevpn idle-time 1800
vpngroup tsevpn password ********
vpngroup vpntse idle-time 1800
telnet 10.1.1.2 255.255.255.255 inside
telnet 10.1.1.0 255.255.255.0 inside
telnet timeout 5
ssh 10.1.1.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
username admin password YQ7us2tBAraRV9Le encrypted privilege 2
terminal width 80
Cryptochecksum:9e126462453ea8f1ed34a28635152583
: end
 
merci pour votre aide
 

Reply

Marsh Posté le 22-10-2011 à 14:52:58   

Reply

Marsh Posté le 22-10-2011 à 20:08:37    

utilise le pdm, y a un wizard pour le faire.


---------------
"Parceque toi tu fracasses du migrant à la batte de baseball, c'est ça ?" - Backbone-
Reply

Marsh Posté le 23-10-2011 à 12:42:34    

j'ai essayé de faire la config avec le pdm, mais j'ai pas réussi à y accès problède certificat et de version de java installé sur mon pc

Reply

Sujets relatifs:

Leave a Replay

Make sure you enter the(*)required information where indicate.HTML code is not allowed