Building configuration...
 
Current configuration : 1474 bytes
!
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Switch1
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$ZpVF$RiAW5KZzUFc0uxEWGMoD5.
enable password cisco
!
no aaa new-model
system mtu routing 1500
ip subnet-zero
!
!
!
!
!
!
!
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
!
!
interface Port-channel1
 switchport trunk allowed vlan 100,200
 switchport mode trunk
!
interface GigabitEthernet0/1
!
interface GigabitEthernet0/2
 switchport access vlan 100
 switchport mode access
!
interface GigabitEthernet0/3
 switchport access vlan 200
 switchport mode access
!
interface GigabitEthernet0/4
!
interface GigabitEthernet0/5
!
interface GigabitEthernet0/6
!
interface GigabitEthernet0/7
 description L2 Switch Mod1/1
 switchport trunk allowed vlan 100,200
 switchport mode trunk
 channel-group 1 mode passive
!
interface GigabitEthernet0/8
 description L2 Switch Mod2/1
 switchport trunk allowed vlan 100,200
 switchport mode trunk
 channel-group 1 mode passive
!
interface Vlan1
 no ip address
 no ip route-cache
 shutdown
!
interface Vlan100
 no ip address
 no ip route-cache
!
interface Vlan200
 no ip address
 no ip route-cache
!
ip http server
ip http secure-server
!
control-plane
!
!
line con 0
line vty 0 4
 password cisco
 login
line vty 5 15
 password cisco
 login
!
end

----
GigabitEthernet0/7:
Port state    = Up Mstr Assoc In-Bndl
Channel group = 1           Mode = Passive         Gcchange = -
Port-channel  = Po1         GC   =   -             Pseudo port-channel = Po1
Port index    = 0           Load = 0x00            Protocol =   LACP
 
Flags:  S - Device is sending Slow LACPDUs   F - Device is sending fast LACPDUs.
        A - Device is in active mode.        P - Device is in passive mode.
 
Local information:
                            LACP port     Admin     Oper    Port        Port
Port      Flags   State     Priority      Key       Key     Number      State
Gi0/7     SP      bndl      32768         0x1       0x1     0x7         0x3C
 
Partner's information:
 
                  LACP port                        Admin  Oper   Port    Port
Port      Flags   Priority  Dev ID          Age    key    Key    Number  State
Gi0/7     SA      1         001b.edb0.d700  11s    0x0    0x64   0x1     0x3D
 
Age of the port in the current state: 0d:15h:32m:08s
 
----
GigabitEthernet0/8:
Port state    = Up Mstr Assoc In-Bndl
Channel group = 1           Mode = Passive         Gcchange = -
Port-channel  = Po1         GC   =   -             Pseudo port-channel = Po1
Port index    = 0           Load = 0x00            Protocol =   LACP
 
Flags:  S - Device is sending Slow LACPDUs   F - Device is sending fast LACPDUs.
        A - Device is in active mode.        P - Device is in passive mode.
 
Local information:
                            LACP port     Admin     Oper    Port        Port
Port      Flags   State     Priority      Key       Key     Number      State
Gi0/8     SP      bndl      32768         0x1       0x1     0x8         0x3C
 
Partner's information:
 
                  LACP port                        Admin  Oper   Port    Port
Port      Flags   Priority  Dev ID          Age    key    Key    Number  State
Gi0/8     SA      1         001b.edb0.d700  29s    0x0    0x64   0x15    0x3D
 
Age of the port in the current state: 0d:15h:19m:54s
 
----
Port-channel1:Port-channel1   (Primary aggregator)
 
Age of the Port-channel   = 5d:19h:34m:43s
Logical slot/port   = 2/1          Number of ports = 2
HotStandBy port = null
Port state          = Port-channel Ag-Inuse
Protocol            =   LACP
Port security       = Disabled
 
Ports in the Port-channel:
 
Index   Load   Port     EC state        No of bits
------+------+------+------------------+-----------
  0     00     Gi0/7    Passive            0
  0     00     Gi0/8    Passive            0
 
Time since last port bundled:    0d:15h:19m:57s    Gi0/8
Time since last port Un-bundled: 0d:15h:34m:36s    Gi0/8

Port      Name               Status       Vlan       Duplex  Speed Type
Po1                          connected    trunk      a-full a-1000

Port        Mode             Encapsulation  Status        Native vlan
Po1         on               802.1q         trunking      1
 
Port        Vlans allowed on trunk
Po1         100,200
 
Port        Vlans allowed and active in management domain
Po1         100,200
 
Port        Vlans in spanning tree forwarding state and not pruned
Po1         100,200

VLAN Name                             Status    Ports
---- -------------------------------- --------- -------------------------------
1    default                          active    Gi0/1, Gi0/4, Gi0/5, Gi0/6
100  User                             active    Gi0/3
200  AP                               active    Gi0/2
1002 fddi-default                     act/unsup
1003 token-ring-default               act/unsup
1004 fddinet-default                  act/unsup
1005 trnet-default                    act/unsup