g un graveur liteonit 12*10*32
je vien de reinstaller mon w2k
g mis tt les dernier drivers,
easycdcreator & nero n'arrive pas  
a faire une seul gravure.
 
voici le log :
 
Windows NT 5.0
WinAspi: -
ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.16, size=151619 bytes, created 07/04/2001 21:44:10
Version Nero: 5.0.4.4
Graveur:              <LITE-ON LTR-12101B>      Version: LS22 - HA 0 TA 1 - 5.0.4.4
 Pilote d'adaptateur: <IntelATA>                HA 0
 Drive buffer  :      2048kB
CD-ROM:               <V386     PHANTOM CDROM>  Version: 1.0f - HA 2 TA 0 - 5.0.4.4
 Pilote d'adaptateur: <Daemon>                  HA 2
LITE-ON LTR-12101B      LS22  IntelATA Port 0 ID 1  DMA:  ?  
V386    PHANTOM CDROM   1.0f    Daemon Port 2 ID 0  DMA:  ?  
AutoRun : 1
CmdQueuing     : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed     : 0
BUFE           : 0
Physical memory     : 255MB (261596kB)
Free physical memory: 120MB (123144kB)
Memory in use       : 52 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry: 1
Wizard: Off
 
CD-ROM (ISO)
7.4.2001
 
21:48:40 #1 Phase 72 File dlgbrnst.cpp, Line 1193
 BURN-Proof activated
 
21:48:41 #2 Text 0 File Reader.cpp, Line 116
 Reader running
 
21:48:41 #3 Text 0 File Writer.cpp, Line 108
 Writer LITE-ON LTR-12101B running
 
21:48:41 #4 ISO9660GEN -11 File geniso.cpp, Line 3245
 First writeable address = 0 (0x00000000)
 
21:48:41 #5 Text 0 File ThreadedTransferInterface.cpp, Line 644
 Setup items (original item values)
  0: TRM_DATA_MODE1 (CTransferItem)
     2 indices, index0 (150) not provided
     original CD pos #0 + 291785 (291785) = #291785/64:50.35
     relocatable, CD pos for caching/writing not required/required, no patch infos  
 --------------------------------------------------------------
 
21:48:43 #6 Text 0 File Burncd.cpp, Line 1661
 Recorder:  LITE-ON LTR-12101B;
    CDRW code: 00 97 34 23; OSJ entry from: Mitsubishi Chemical
    ATIP Data:
      Special    Info [hex] 1: A3 00 CE, 2: 61 22 17 (LI 97:34.23), 3: 4A 2B 00 (LO 74:43.00)
      Additional Info [hex] 1: 24 2C DC, 2: 14 A4 4A, 3: 00 00 00 (invalid)
 
21:48:44 #7 Text 0 File ThreadedTransferInterface.cpp, Line 778
 Prepare recorder LITE-ON LTR-12101B for write in TAO
 DAO infos:
 ==========
 MCN:  
 TOCTYPE: 0x0   Close CD
 Tracks 1 to 1:
    TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 597882880
 
21:48:44 #8 Text 0 File ThreadedTransferInterface.cpp, Line 806
 Removed 2 run-out blocks from end of track 1.
 
21:48:44 #9 Text 0 File ThreadedTransferInterface.cpp, Line 644
 Setup items (after recorder preparation)
  0: TRM_DATA_MODE1 (CTransferItem)
     2 indices, index0 (150) not provided
     original CD pos #0 + 291785 (291785) = #291785/64:50.35
     relocatable, CD pos for caching/writing not required/required, no patch infos  
     -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 291783 blocks [LITE-ON LTR-12101B]
 --------------------------------------------------------------
 
21:48:44 #10 Phase 24 File dlgbrnst.cpp, Line 1193
 Début cache des fichiers
 
21:48:44 #11 Phase 25 File dlgbrnst.cpp, Line 1193
 Cache des fichier terminé
 
21:48:44 #12 Phase 36 File dlgbrnst.cpp, Line 1193
 Début de gravure à 10x (1500 Ko/s)
 
21:48:44 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1765
 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
 
21:48:44 #14 Text 0 File Mmc.cpp, Line 14191
 Set BUFE: BURN-Proof -> ON
 
 
21:49:02 #15 SCSI -26 File Cdrdrv.cpp, Line 1333
 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x071400B0
 Status:     0x82 (0x07, SCSI_NO_DEVICE)
 HA-Status   0x00 (0x00, OK)
 TA-Status   0x00 (0x00, OK)
 Sense Key:  0x00 (KEY_NO_SENSE)
 Sense Code: 0x00
 Sense Qual: 0x00
 CDB Data:   0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1E 0x00  
 Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00  
             0x00 0x00 0x00 0x00 0x00 0x00  
 
21:49:02 #16 CDR -26 File Writer.cpp, Line 284
 SCSI/ATAPI command timeout error
 
21:49:02 #17 Text 0 File ThreadedTransfer.cpp, Line 216
 all writers idle, stopping conversion
 
21:49:03 #18 Text 0 File ThreadedTransfer.cpp, Line 210
 conversion idle, stopping reader
 
21:49:03 #19 CDR -201 File WriterStatus.cpp, Line 155
 Fonction writestate invalide
 
21:49:03 #20 TRANSFER -18 File WriterStatus.cpp, Line 155
 Impossible d'effectuer la fonction EndTrack
 
21:49:03 #21 SCSI -1176 File Cdrdrv.cpp, Line 1122
 SCSI Exec, HA 0, TA 1, LUN 0
 Status:     0x04 (0x01, SCSI_ERR)
 HA-Status   0x00 (0x00, OK)
 TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
 Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
 Sense Code: 0x72
 Sense Qual: 0x04
 CDB Data:   0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00  
 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A  
             0x00 0x00 0x00 0x00 0x72 0x04  
 
21:49:03 #22 mmc -1176 File WriterStatus.cpp, Line 194
 Session fixation error
 
21:49:03 #23 TRANSFER -19 File WriterStatus.cpp, Line 194
 Impossible d'effectuer la fonction Fixation
 
21:49:03 #24 Text 0 File WriterStatus.cpp, Line 203
 falling back to disc fixation
 
21:49:03 #25 SCSI -1176 File Cdrdrv.cpp, Line 1122
 SCSI Exec, HA 0, TA 1, LUN 0
 Status:     0x04 (0x01, SCSI_ERR)
 HA-Status   0x00 (0x00, OK)
 TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
 Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
 Sense Code: 0x72
 Sense Qual: 0x04
 CDB Data:   0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00  
 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A  
             0x00 0x00 0x00 0x00 0x72 0x04  
 
21:49:03 #26 mmc -1176 File WriterStatus.cpp, Line 194
 Session fixation error
 
21:49:03 #27 TRANSFER -19 File WriterStatus.cpp, Line 194
 Impossible d'effectuer la fonction Fixation
 
21:49:03 #28 Phase 38 File dlgbrnst.cpp, Line 1193
 La gravure a échoué à 10x (1500 Ko/s)
 
21:49:03 #29 Text 0 File Scsicmd.cpp, Line 311
 SCSI not using temporary buffers
 20 out of 20 temporary buffers allocated
 
 
Existing drivers:

[edit]--Message édité par flat_jc--[/edit]

hellpppppppp

Graveur mort ???????
 
Essaye ton graveur sur une autre machine et tu seras déja fixé

bah le probleme est pas du graveur,
je vien juste de reinstaller w2k
because ca rebootait tt seul
soidisant ke je n'avais pas  insatller les driver 815e
& les driver DMA
 
je vien d'installer tt ca
et now je peu pu graver !!!
 
je gravais corectement juste avant de reinstaller !!
 
c bien relou

bon bah g fe une double install
et c cette merde de win2k
ki me fait des tours
je vien d'installer 98b
et cela tourne nikel.............
 
allez que de mesaventure
pour 2 pauvre cd a graver