Bonjour,
 
j'ai installé gentoo2004.1 avec le noyaux 2.6 mais apres la configuration de XFree et lancement de startx il me donne ce message d'erreur (comme-ci il ne trouve pas l'ecran) apres plusieurs tentative toujours la meme erreur
 
 
XFree86 Version 4.3.0.1
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.7 i686 [ELF]  
Build Date: 22 July 2004
 Before reporting problems, check http://www.XFree86.Org/
 to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Jul 22 21:33:09 2004
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "elonex"
(**) |   |-->Device "NVIDIA GeForce"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "fr"
(**) XKB: layout: "fr"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
Using vt 7
(--) using VT number 7
 
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
 XFree86 ANSI C Emulation: 0.2
 XFree86 Video Driver: 0.6
 XFree86 XInput driver : 0.4
 XFree86 Server Extension : 0.2
 XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
 compiled for 4.3.0.1, module version = 1.0.0
 Module class: XFree86 Font Renderer
 ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
 compiled for 4.3.0.1, module version = 1.0.0
 ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
 compiled for 4.3.0.1, module version = 1.0.0
 Module class: XFree86 Server Extension
 ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
 compiled for 4.3.0.1, module version = 1.0.0
 Module class: XFree86 Server Extension
 ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
 compiled for 4.3.0.1, module version = 1.0.2
 Module class: XFree86 Font Renderer
 ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
 compiled for 4.3.0.1, module version = 1.0.1
 Module class: XFree86 Font Renderer
 ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
 compiled for 4.0.2, module version = 1.0.4496
 Module class: XFree86 Server Extension
 ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "nvidia.o" (nvidia)
(WW) LoadModule: given non-canonical module name "nvidia.o"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
 compiled for 4.0.2, module version = 1.0.4496
 Module class: XFree86 Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
 compiled for 4.3.0.1, module version = 1.0.0
 Module class: XFree86 XInput Driver
 ABI class: XFree86 XInput driver, version 0.4
(II) NVIDIA XFree86 Driver  1.0-4496  Wed Jul 16 19:06:03 PDT 2003
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(II) Primary Device is: PCI 02:00:0
(EE) No devices detected.
 
Fatal server error:
no screens found

Carte graphique nvidia ?? charge les derniers modules nvidia 6106 et sh NVidia***.run et apres startx et c parti
(n'oublie pas le driver c'est nvidia et decommente la ligne load "glx" dans XF86Config)

oui c'est une nvidia, j'ai biend decomenté le glx et mis nvidia dans driver, j'ai aussi fait un emerge nvidia-kernel et nvidia-glx puis à la fin un env-update pour lancer l'opengl mais j'ai cette erruer lors de startx
 
par contre tu parle des nvidia 6106 et fair un run*.sh donc tu pense qu'il faut que je telecharge d'autre driver nvidia?

t'as essayé avec le driver nv par défaut de xfree ?

alors oui je pense qu'il te faut  ces driver (étant détenteur d'une nvidia sur un noyau 2.6.7 love source )
 
possibilité de téléchargement à cet adresse
http://download.nvidia.com/XFree86 [...] 6-pkg1.run

le nvidia-kernel est trop obsolète et convient parfaitement a un kernel 2.4 sinon il te faut juste c driver pas de emerge nvidia-glx ou autre. juste ces driver

N'hésite pas non plus a consulter les forums gentoo, c'est une vrai mine d'or pour t'aider

les 61xx sont aussi dans portage, hein

emerge /usr/portage/media-video/nvidia-kernel/nvidia-kernel-1.0.5336-r4.ebuild  
emerge /usr/portage/media-video/nvidia-glx/nvidia-glx-1.0.5336-r2.ebuild

ça marche sans problème chez moi (kernel 2.6.7-gentoo) avec les derniers drivers ds portage (emerge nvidia-kernel et emerge nvidia-glx). Ce sont aussi les 61.06 dans portage...
t'as fait opengl-update nvidia ?
tu peux pas poster ton fichier de config Xfree ?

oula il y pas pas mal de reponse, donc voila ce que j'obtien avec les driver 6106 en passant par sh nvidia****.run et apres lancement de startx j'obtien bien le logo nvidia mais apres crash dont voici le fichier log
(sinon oui j'ai bien fait emerge nvidia-kernel et emerge nvidia-glx et opengl-update nvidia)
 
XFree86 Version 4.3.0.1
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.7 i686 [ELF]  
Build Date: 22 July 2004
 Before reporting problems, check http://www.XFree86.Org/
 to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Jul 22 22:38:38 2004
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "elonex"
(**) |   |-->Device "NVIDIA GeForce"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "fr"
(**) XKB: layout: "fr"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
Using vt 7
(--) using VT number 7
 
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
 XFree86 ANSI C Emulation: 0.2
 XFree86 Video Driver: 0.6
 XFree86 XInput driver : 0.4
 XFree86 Server Extension : 0.2
 XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
 compiled for 4.3.0.1, module version = 1.0.0
 Module class: XFree86 Font Renderer
 ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
 compiled for 4.3.0.1, module version = 1.0.0
 ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,01a4 card 0000,0000 rev b2 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 10de,01ac card 1043,0c11 rev b2 class 05,00,00 hdr 80
(II) PCI: 00:00:2: chip 10de,01ad card 1043,0c11 rev b2 class 05,00,00 hdr 80
(II) PCI: 00:00:3: chip 10de,01ab card 1043,0c11 rev b2 class 05,00,00 hdr 80
(II) PCI: 00:01:0: chip 10de,01b2 card 1043,0c11 rev c3 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,01b4 card 1043,0c11 rev c1 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,01c2 card 1043,0c11 rev c3 class 0c,03,10 hdr 00
(II) PCI: 00:03:0: chip 10de,01c2 card 1043,0c11 rev c3 class 0c,03,10 hdr 00
(II) PCI: 00:05:0: chip 10de,01b0 card 1043,0c11 rev c2 class 04,01,00 hdr 00
(II) PCI: 00:06:0: chip 10de,01b1 card 1043,8384 rev c2 class 04,01,00 hdr 80
(II) PCI: 00:08:0: chip 10de,01b8 card 0000,0000 rev c2 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 10de,01bc card 1043,0c11 rev c3 class 01,01,8a hdr 00
(II) PCI: 00:1e:0: chip 10de,01b7 card 0000,0000 rev b2 class 06,04,00 hdr 01
(II) PCI: 01:09:0: chip 10ec,8139 card 4554,434e rev 10 class 02,00,00 hdr 00
(II) PCI: 02:00:0: chip 10de,0281 card 107d,2930 rev a1 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
 [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
 [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
 [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:8:0), (0,1,1), BCTRL: 0x0000 (VGA_EN is cleared)
(II) Bus 1 I/O range:
 [0] -1 0 0x0000c000 - 0x0000cfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
 [0] -1 0 0xf1000000 - 0xf17fffff (0x800000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 2 non-prefetchable memory range:
 [0] -1 0 0xf0000000 - 0xf0ffffff (0x1000000) MX[B]
(II) Bus 2 prefetchable memory range:
 [0] -1 0 0xf3f00000 - 0xf7ffffff (0x4100000) MX[B]
(--) PCI:*(2:0:0) nVidia Corporation NV28 [GeForce4 Ti 4200 AGP 8x] rev 161, Mem @ 0xf0000000/24, 0xf4000000/26, BIOS @ 0xf3fe0000/17
(II) Addressable bus resource ranges are
 [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
 [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
 [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
 [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf8000000 from 0xfbffffff to 0xf7ffffff
(II) Active PCI resource ranges:
 [0] -1 0 0xf1000000 - 0xf10000ff (0x100) MX[B]
 [1] -1 0 0xf1800000 - 0xf1800fff (0x1000) MX[B]
 [2] -1 0 0xf2000000 - 0xf207ffff (0x80000) MX[B]
 [3] -1 0 0xf2800000 - 0xf2800fff (0x1000) MX[B]
 [4] -1 0 0xf3000000 - 0xf3000fff (0x1000) MX[B]
 [5] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
 [6] -1 0 0xf3fe0000 - 0xf3ffffff (0x20000) MX[B](B)
 [7] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
 [8] -1 0 0xf0000000 - 0xf0ffffff (0x1000000) MX[B](B)
 [9] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
 [10] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B]
 [11] -1 0 0x0000e000 - 0x0000e07f (0x80) IX[B]
 [12] -1 0 0x0000e100 - 0x0000e1ff (0x100) IX[B]
 [13] -1 0 0x00005100 - 0x0000511f (0x20) IX[B]
 [14] -1 0 0x00005500 - 0x0000550f (0x10) IX[B]
 [15] -1 0 0x00005000 - 0x0000500f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
 [0] -1 0 0xf1000000 - 0xf10000ff (0x100) MX[B]
 [1] -1 0 0xf1800000 - 0xf1800fff (0x1000) MX[B]
 [2] -1 0 0xf2000000 - 0xf207ffff (0x80000) MX[B]
 [3] -1 0 0xf2800000 - 0xf2800fff (0x1000) MX[B]
 [4] -1 0 0xf3000000 - 0xf3000fff (0x1000) MX[B]
 [5] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
 [6] -1 0 0xf3fe0000 - 0xf3ffffff (0x20000) MX[B](B)
 [7] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
 [8] -1 0 0xf0000000 - 0xf0ffffff (0x1000000) MX[B](B)
 [9] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
 [10] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B]
 [11] -1 0 0x0000e000 - 0x0000e07f (0x80) IX[B]
 [12] -1 0 0x0000e100 - 0x0000e1ff (0x100) IX[B]
 [13] -1 0 0x00005100 - 0x0000511f (0x20) IX[B]
 [14] -1 0 0x00005500 - 0x0000550f (0x10) IX[B]
 [15] -1 0 0x00005000 - 0x0000500f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
 [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
 [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
 [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
 [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [5] -1 0 0xf1000000 - 0xf10000ff (0x100) MX[B]
 [6] -1 0 0xf1800000 - 0xf1800fff (0x1000) MX[B]
 [7] -1 0 0xf2000000 - 0xf207ffff (0x80000) MX[B]
 [8] -1 0 0xf2800000 - 0xf2800fff (0x1000) MX[B]
 [9] -1 0 0xf3000000 - 0xf3000fff (0x1000) MX[B]
 [10] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
 [11] -1 0 0xf3fe0000 - 0xf3ffffff (0x20000) MX[B](B)
 [12] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
 [13] -1 0 0xf0000000 - 0xf0ffffff (0x1000000) MX[B](B)
 [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
 [16] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
 [17] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B]
 [18] -1 0 0x0000e000 - 0x0000e07f (0x80) IX[B]
 [19] -1 0 0x0000e100 - 0x0000e1ff (0x100) IX[B]
 [20] -1 0 0x00005100 - 0x0000511f (0x20) IX[B]
 [21] -1 0 0x00005500 - 0x0000550f (0x10) IX[B]
 [22] -1 0 0x00005000 - 0x0000500f (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
 compiled for 4.3.0.1, module version = 1.0.0
 Module class: XFree86 Server Extension
 ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
 compiled for 4.3.0.1, module version = 1.0.0
 Module class: XFree86 Server Extension
 ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
 compiled for 4.3.0.1, module version = 1.0.2
 Module class: XFree86 Font Renderer
 ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
 compiled for 4.3.0.1, module version = 1.0.1
 Module class: XFree86 Font Renderer
 ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
 compiled for 4.0.2, module version = 1.0.4496
 Module class: XFree86 Server Extension
 ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
 compiled for 4.0.2, module version = 1.0.6106
 Module class: XFree86 Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
 compiled for 4.3.0.1, module version = 1.0.0
 Module class: XFree86 XInput Driver
 ABI class: XFree86 XInput driver, version 0.4
(II) NVIDIA X Driver  1.0-6106  Wed Jun 23 08:14:45 PDT 2004
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(II) Primary Device is: PCI 02:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) resource ranges after xf86ClaimFixedResources() call:
 [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
 [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [5] -1 0 0xf1000000 - 0xf10000ff (0x100) MX[B]
 [6] -1 0 0xf1800000 - 0xf1800fff (0x1000) MX[B]
 [7] -1 0 0xf2000000 - 0xf207ffff (0x80000) MX[B]
 [8] -1 0 0xf2800000 - 0xf2800fff (0x1000) MX[B]
 [9] -1 0 0xf3000000 - 0xf3000fff (0x1000) MX[B]
 [10] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
 [11] -1 0 0xf3fe0000 - 0xf3ffffff (0x20000) MX[B](B)
 [12] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
 [13] -1 0 0xf0000000 - 0xf0ffffff (0x1000000) MX[B](B)
 [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
 [16] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
 [17] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B]
 [18] -1 0 0x0000e000 - 0x0000e07f (0x80) IX[B]
 [19] -1 0 0x0000e100 - 0x0000e1ff (0x100) IX[B]
 [20] -1 0 0x00005100 - 0x0000511f (0x20) IX[B]
 [21] -1 0 0x00005500 - 0x0000550f (0x10) IX[B]
 [22] -1 0 0x00005000 - 0x0000500f (0x10) IX[B]
(II) resource ranges after probing:
 [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
 [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [5] -1 0 0xf1000000 - 0xf10000ff (0x100) MX[B]
 [6] -1 0 0xf1800000 - 0xf1800fff (0x1000) MX[B]
 [7] -1 0 0xf2000000 - 0xf207ffff (0x80000) MX[B]
 [8] -1 0 0xf2800000 - 0xf2800fff (0x1000) MX[B]
 [9] -1 0 0xf3000000 - 0xf3000fff (0x1000) MX[B]
 [10] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
 [11] -1 0 0xf3fe0000 - 0xf3ffffff (0x20000) MX[B](B)
 [12] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
 [13] -1 0 0xf0000000 - 0xf0ffffff (0x1000000) MX[B](B)
 [14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
 [15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
 [16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
 [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
 [19] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
 [20] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B]
 [21] -1 0 0x0000e000 - 0x0000e07f (0x80) IX[B]
 [22] -1 0 0x0000e100 - 0x0000e1ff (0x100) IX[B]
 [23] -1 0 0x00005100 - 0x0000511f (0x20) IX[B]
 [24] -1 0 0x00005500 - 0x0000550f (0x10) IX[B]
 [25] -1 0 0x00005000 - 0x0000500f (0x10) IX[B]
 [26] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
 [27] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
 compiled for 4.3.0.1, module version = 0.1.0
 ABI class: XFree86 Video Driver, version 0.6
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xF4000000
(--) NVIDIA(0): MMIO registers at 0xF0000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce4 Ti 4200 with AGP8X
(--) NVIDIA(0): VideoBIOS: 04.28.20.21.00
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): VideoRAM: 65536 kBytes
(II) NVIDIA(0): Connected display device(s): CRT-1
(--) NVIDIA(0): Display device CRT-1: maximum pixel clock at  8 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-1: maximum pixel clock at 16 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-1: maximum pixel clock at 32 bpp: 350 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
 compiled for 4.3.0.1, module version = 1.0.0
 ABI class: XFree86 Video Driver, version 0.6
(II) NVIDIA(0): elonex: Using hsync range of 31.50-57.00 kHz
(II) NVIDIA(0): elonex: Using vrefresh range of 50.00-90.00 Hz
(II) NVIDIA(0): Clock range:  12.00 to 350.00 MHz
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "512x384" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "512x384" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1152x864" (hsync out of range)
(II) NVIDIA(0): Not using default mode "576x432" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x960" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x480" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x960" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x480" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1400x1050" (hsync out of range)
(II) NVIDIA(0): Not using default mode "700x525" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1400x1050" (hsync out of range)
(II) NVIDIA(0): Not using default mode "700x525" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using mode "1280x1024" (no mode of this name)
(II) NVIDIA(0): Not using default mode "1152x768" (width too large for virtual size)
(WW) NVIDIA(0): Not using mode "576x384":
(WW) NVIDIA(0):   horizontal sync start (589) not a multiple of 8
(WW) NVIDIA(0): Not using mode "360x200":
(WW) NVIDIA(0):   horizontal sync start (378) not a multiple of 8
(**) NVIDIA(0): Validated modes for display device CRT-1:
(**) NVIDIA(0):      Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(**) NVIDIA(0):      Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) NVIDIA(0):      Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(**) NVIDIA(0):      Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(**) NVIDIA(0):      Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.0 Hz (I)
(**) NVIDIA(0):      Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(**) NVIDIA(0):      Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(**) NVIDIA(0):      Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(**) NVIDIA(0):      Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(**) NVIDIA(0):      Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(**) NVIDIA(0):      Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(**) NVIDIA(0):      Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(**) NVIDIA(0):      Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(**) NVIDIA(0):      Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(**) NVIDIA(0):      Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(**) NVIDIA(0):      Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(**) NVIDIA(0):      Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(**) NVIDIA(0):      Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(**) NVIDIA(0):      Default mode "512x384": 22.4 MHz, 35.5 kHz, 86.9 Hz (D)
(**) NVIDIA(0):      Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(**) NVIDIA(0):      Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(**) NVIDIA(0):      Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(**) NVIDIA(0):      Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(**) NVIDIA(0):      Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(**) NVIDIA(0):      Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(**) NVIDIA(0):      Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(**) NVIDIA(0):      Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0):      Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(**) NVIDIA(0):      Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(**) NVIDIA(0):      Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(**) NVIDIA(0):      Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(--) NVIDIA(0): Display dimensions: (310, 230) mm
(--) NVIDIA(0): DPI set to (83, 84)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
 compiled for 4.3.0.1, module version = 1.0.0
 ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
 compiled for 4.3.0.1, module version = 0.1.0
 ABI class: XFree86 Video Driver, version 0.6
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
 [0] 0 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B]
 [1] 0 0 0xf0000000 - 0xf0ffffff (0x1000000) MX[B]
 [2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
 [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [7] -1 0 0xf1000000 - 0xf10000ff (0x100) MX[B]
 [8] -1 0 0xf1800000 - 0xf1800fff (0x1000) MX[B]
 [9] -1 0 0xf2000000 - 0xf207ffff (0x80000) MX[B]
 [10] -1 0 0xf2800000 - 0xf2800fff (0x1000) MX[B]
 [11] -1 0 0xf3000000 - 0xf3000fff (0x1000) MX[B]
 [12] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
 [13] -1 0 0xf3fe0000 - 0xf3ffffff (0x20000) MX[B](B)
 [14] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
 [15] -1 0 0xf0000000 - 0xf0ffffff (0x1000000) MX[B](B)
 [16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
 [17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
 [18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
 [19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
 [21] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
 [22] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B]
 [23] -1 0 0x0000e000 - 0x0000e07f (0x80) IX[B]
 [24] -1 0 0x0000e100 - 0x0000e1ff (0x100) IX[B]
 [25] -1 0 0x00005100 - 0x0000511f (0x20) IX[B]
 [26] -1 0 0x00005500 - 0x0000550f (0x10) IX[B]
 [27] -1 0 0x00005000 - 0x0000500f (0x10) IX[B]
 [28] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
 [29] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) NVIDIA(0): Setting mode "1024x768"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) [GLX]: Initializing GLX extension
 
   *** If unresolved symbols were reported above, they might not
   *** be the reason for the server aborting.
 
Fatal server error:
Caught signal 11.  Server aborting

il y a un problème au niveau du GLX, il charge toujours la version 44.96. T'as bien emergé le glx 61.06 ??

je n'ais pas tres bien saisie ta question dois je refaire un emerge nvidia-kernel et glx apres l'installation des drivers avec sh nvidia*.run?
 
ou n'y a t'il pas un conflit comme j'avais deja une install avant l'instal des 6106?

ACCEPT_KEYWORDS="~x86" emerge nvidia-kernel nvidia-glx
 
il faut aussi vérifier que le lien /usr/src/linux pointe bien vers ton rep de noyeau actuel

arf ! J'avais pas vu que les 61.06 sont masqués sur x86 ! C'est marrant, toutes les versions récentes sont masquées sur x86, mais pas sur amd64 !!
 
Alors en effet, tu dois faire la commande spécifiée plus haut pour installer les derniers drivers. tu auras les 61.06. Pas besoin d'aller chercher quoi que ce soit sur le site de nVidia.

oui /usr/src/linux pointe bien sur mon noyeaux je l'avais verifier lors de l'install
 
donc si je resume pas besoin d'executer "sh nvidia*.run" mais simplement emerge nvidia-kernel nvidia-glx (chose que j'avais faite hormis ACCEPT_KEYWORDS="~x86" )
 
donc je test cela ce soir et je vous tien au courant
 
pourvue que ca marche

bon apres essaye ce soir les emerge rappatrie en fait la version 45 des drivers nvidia et non les 6106.
 
desinstall des emerge et install avec .run des 6106.
 
lancement de startx---> logo nvidia ---> puis ecran noir avec la croix de la souris, mais figer.
 
rebelotte avec cette fois ma souris en imps au lieu de intellimouse.
 
lancement de startx---> logo nvidia ---> puis ecran noir avec la croix de la souris, mais cette fois la croix bouge mais toujours ecran noir
Rolling Eyes
 
sinon voici mon xf86config
 
 
# File generated by xf86config.
 
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software" ),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
 
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
 
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
 
# This loads the DBE extension module.
 
Load "dbe" # Double buffer extension
 
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
 
# This loads the Type1 and FreeType font modules
Load "type1"
Load "speedo"
# Load "freetype"
# Load "xtt"
 
# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"
 
EndSection
 
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
 
Section "Files"
 
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db" ). There is normally
# no need to change the default.
 
RgbPath "/usr/X11R6/lib/X11/rgb"
 
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
 
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
# FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
 
# The module search path. The default path is shown here.
 
# ModulePath "/usr/X11R6/lib/modules"
 
EndSection
 
# **********************************************************************
# Server flags section.
# **********************************************************************
 
Section "ServerFlags"
 
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
 
# Option "NoTrapSignals"
 
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
 
# Option "DontVTSwitch"
 
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
 
# Option "DontZap"
 
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
 
# Option "Dont Zoom"
 
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
 
# Option "DisableVidModeExtension"
 
# Uncomment this to enable the use of a non-local xvidtune client.
 
# Option "AllowNonLocalXvidtune"
 
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
 
# Option "DisableModInDev"
 
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
 
# Option "AllowNonLocalModInDev"
 
EndSection
 
# **********************************************************************
# Input devices
# **********************************************************************
 
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
 
Section "InputDevice"
 
Identifier "Keyboard1"
Driver "Keyboard"
 
# For most OSs the protocol can be omitted (it defaults to "Standard" ).
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
 
# Option "Protocol" "Xqueue"
 
Option "AutoRepeat" "500 30"
 
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
 
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
 
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
 
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
 
# Option "XkbDisable"
 
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
 
EndSection
 
 
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
 
Section "InputDevice"
 
# Identifier and driver
 
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/mouse"
 
# Mouse-speed setting for PS/2 mouse.
 
# Option "Resolution" "256"
 
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
 
# Option "Protocol" "Xqueue"
 
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
 
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
 
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
 
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
 
# ChordMiddle is an option for some 3-button Logitech mice
 
# Option "ChordMiddle"
 
EndSection
 
 
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
 
# **********************************************************************
# Monitor section
# **********************************************************************
 
# Any number of monitor sections may be present
 
Section "Monitor"
 
Identifier "My Monitor"
 
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
 
HorizSync 31.5 - 57.0
 
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
 
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
 
VertRefresh 50-70
 
EndSection
 
 
# **********************************************************************
# Graphics device section
# **********************************************************************
 
# Any number of graphics device sections may be present
 
# Standard VGA Device:
 
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
 
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
 
# Chipset "generic"
 
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
 
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
 
# BusID "PCI:0:10:0"
 
# VideoRam 256
 
# Clocks 25.2 28.3
 
EndSection
 
# Device configured by xf86config:
 
Section "Device"
Identifier "geforce NVIDIA"
Driver "nvidia"
#VideoRam 65536
# Insert Clocks lines here if appropriate
EndSection
 
 
# **********************************************************************
# Screen sections
# **********************************************************************
 
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "geforce NVIDIA"
Monitor "My Monitor"
DefaultDepth 24
 
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768"
ViewPort 0 0
EndSubsection
EndSection
 
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
 
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
 
Section "ServerLayout"
 
# The Identifier line must be present
Identifier "Simple Layout"
 
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
 
Screen "Screen 1"
 
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
 
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
 
EndSection
 
# Section "DRI"
# Mode 0666
# EndSection

ça n'a pas marché en utilisant ACCEPT_KEYWORDS ???? Il faut le taper sur la même ligne que emerge !!
 
C'est quoi comme erreur maintenant, celle de départ avec screen not found ?

euh je l'ai tapé avant et non sur la meme ligne

tu dois taper ça sur la même ligne, c'est pour qu'emerge accepte les packages en testing. Mais il faut le mettre sur la même ligne de commande, juste devant.

bon en fin de compte l'ecran noir c'est normal il fallait faire un click milieu et là miracle un menu et on peut lancer un xterm
 
seul hic il a falu que je change ma souris sur /dev/usbmouse alors qu'avant elle etait sur /dev/mouse.
 
sinon la fentere ce lance mais il faut que je click pour qu'elle s'affiche convenablement et reste sur la meme place.
 
bon mon install avance maintenant au tour de KDE  
 
merci encore pour votre aide

 
évidement, il fallait y penser

ben oui, donc apres plusieurs heures de compil de kde le voila termnié (avec des erreur en fait il s'arrete à l'etape +/- 30 sur 42) mais pour l'instant tout kde marche bien donc je suis plutot content d'avoir un bureau kde3.2.2  
 
sinon il me reste à faire fonccionner la carte son

http://www.gentoo.org/doc/fr/alsa-guide.xml  

mais tu es un saint deltaden merci pour le lien je m'y colle tres bientot

oué ben alsa il sux avec le i865p

ben que veux tu que je te dises... pas de bol...    
Ou écris toi même le driver  

bonjour
je me permet de mettre mon pb dans ce topic, il me parait tout pret pour
j ai bouger ma machine chez quelqu un, je n ai donc ammené que ma tour et mon clavier (ce qui implique, autre ecran, autres souris)
premier demarrage nickel, sauf la souris non reconnu (USB comme celle de d'habitude sur le mm port)
je la laisse tel quel et tente un reboot, et là :
 
(EE) NVIDIA(0) : Failed to initialize the NVIDIA Kernel Module !
(EE) NVIDIA(0) : *** Aborting ***
(EE) Scren(s) found, but none have a usable configuration.
 
Fatal Server error :
no screens found
 
dans le fichier XF86Config-4, g bien ma nvidia comme il faut (je crois) mais dans la section monitor, le fichier a mon compaq 7550, alors que là je suis sur un ACER AL712 TFT.
comme je debute, je ne sais pas si il est conseillé de modifier directement le fichier avec vi, et si oui, quels sont les parametres a entrer.
 
j ai deja fais des recherches, mais n ai trouvé que ca :
http://archives.mandrakelinux.com/ [...] g02382.php
je ne pense pas que mon probleme soit le meme (j ai un peu de mal avec l'anglais, je sais faut que je m y mette si je veux continuer et m en sortir comme un grand sous linux, mais ca viendra )
merci de l aided que vous pourriez m apporter
 
Edit : ooops petite precision :
Mandrake 10.0 Officielle, noyeau 2.6.7
NVIDIA FX 5900 U pilotes 6106 (Driver "nvidia" )

en fait j arrive a recuperer une interface graphique si je met  le pilote nv "de base" plutot que le "FX Generic" via drakconf. mais il ne garde pas les parametres.
si je lance "startx" juste apres les modifs, il affiche, si je le lance apres reboot, j obtiens le meme message, comme si je n avais rien fait.

merci

T'as qu'a mettre une gentoo  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

a c malin
ré-installerais les pilotes nvidia a la maison

 
As tu penser à mettre nvidia dnas le etc/module-preload.
Sinon il ne chargera pas le module lors d'un redemarrage.

??????? what is etc/modules-preload ???
avec la version 61.06 que tu prend sur internet avec le sh .run (qui marche toute fois très bien et qu'il met tout dans le noyau donc c super)
ta même pas besoin d'ajouter le module nvidia dans /etc/modules.autoload.d/kernel-2.6 ou 2.4 (normal c'est dans le kernel).
Donc ma solution est cependant la meilleur car sa marche du tonnerre de brest !

Ça correspond à /etc/modules.autoload.d sur Gentoo (faut pas croire que les fichiers st ts les mêmes qq soit les distribs).
 
Sinon, comme Nvidia est un module externe proprio, tu dois le charger à la main, sinon, ça me semble bizarre pour un bon fctionnement ...

ben si tu l'emerge peut etre que oui
mais avec le fichier de nvidia sa marche nikel. une install et on en parle plus meme pas besoin de load de module au démarage il est en dur dans le kernel

hum, très étonnant.
Sur MDK, tu le mets en autoload, de même en l'emergeant sur Gentoo ...
 
édit : pour qu'il soit en dur, il faudrait que tu recompiles ton noyau après patch, donc ça ne tient pas trop ton affaire là ...

et ben lors de l'install il te dis building kernel et sbam sa marche. (si tu ve mon autoload en direct)

Je sais pour le building kernel (je procéde comme cela pour MDK), mais ça ne veut pas dire que ton nvidia est en dur , d'ailleurs, un lsmod te donne ?

je connais pas encore tres bien, mais je suis sur que lors de la premiere installe du .run de nvidia, j ai eu d operation supplementaire a effectuer. nv35 chargé direct tt le temps !
c'est plus cette histoire de moniteur qui me fait me poser des question. a parait bizarre que ce soit ca qui ai fait partir en vrille la gestion de ma CG !!! j ai dis plus haut que, si je choisissais le pilote XFree "nv", et que tapais directement "startx" apres acceptation des changement, le mode graphique fonctionnait (sauf les parametres de session). et ben c plus le cas.
pourtant, j ai rien touché dans le "XF86Config-4"