aaaaaaaaaaalut!
 
je viens d'intaller une machine sous nunux (mdk 10) pour essayer d'en faire faire une station de travail sans pour autant y laisser mes nerfs.....
 
mais la, je suis deja confronte a plein de probleme qui me chauffe le lobe des oreilles, ce qui n'est pas un mal, me direz vous, en ce dur mois de decembre...
 
1- j'ai pas de son.... ca fait toujours plaisir... il me charge bien un driver via 97, mais il refuse de jouer quoi que ce soit.... que du plaisir....
 
2- au boot, il met 2 plombes a demarrer. j'ai cru remarquer lors de l'install qu'il avait des problemes avec le dma de mon disk dur (que j'ai recupere suite a la mort premature de mon precedent... un gentil petit 20 Gb de chez ibm...)
 
3- j'aimerais bien pour lancer un server vnc qui marche... j'ai installe le package, mais ca a l'air de lui faire ni chaud ni froid....
 
4- ca serait top de pouvoir installer la shockwave machine, pour voir les animation s flash... j'ai telecharger le truc, je l'ai decompacte, je l'ai lance en CLI comme demande sur le site. j'ai reussi a l'installer sur mozilla, mais pas sur konqueror... j'ai essaye le path /usr/lib/kde3, mais ca a pas l'air de lui plaire....
 
ya ti kekun ka une idee???
 
merci!!!!

bon, j'ai resolu le 3... c'est deja pas mal....

1. as tu lancé draksound ?
kelle conf matérielle ?
résultat de :
lspcidrake
grep sound /etc/modprobe.conf
 
2. regarde dans /var/log/messages ou donne le résultat de dmesg
 
3. tu installes le serveur ( tightvnc-server )
http://www.google.fr/linux?q=cache [...] r&ie=UTF-8
 
4. pour l'installer sous konqueror, tu fais :
menu -> système -> configuration ->  configurer votre bureau
 
puis Navigation Internet -> Modules Externes -> [Rechercher] -> "Rechercher de nouveaux modules externes"
Puis tu check dans l'onglet [Modules externes]
 
Note : il se peut que tu doives ajouter le path/chemin où tu as installé le plugin pour mozilla. Mais normalement il y est déjà.
 
Note 2 : plus court : Konqueror -> configuration -> configurer konqueror -> Modules externes

1)
lspcidrake :
amd-k7-agp      : Advanced Micro Devices|AMD-761 North Bridge [BRIDGE_HOST]
unknown         : Advanced Micro Devices|AMD-761 CPU to AGP Bridge  (AGP 4x) [BRIDGE_PCI]
unknown         : VIA Technologies|VT82C686 [Apollo Super] [BRIDGE_ISA]
unknown         : VIA Technologies|VT82C586 IDE [Apollo] [STORAGE_IDE]
usb-uhci        : VIA Technologies|VT82C586B USB [SERIAL_USB]
usb-uhci        : VIA Technologies|VT82C586B USB [SERIAL_USB]
unknown         : VIA Technologies|VT82C686 [Apollo Super ACPI] [SERIAL_SMBUS]
snd-via82xx     : VIA Technologies|VT82C686 [Apollo Super AC97/Audio] [MULTIMEDIA_AUDIO]
8139too         : Realtek|RTL-8139 [NETWORK_ETHERNET]
Card:NVIDIA GeForce2 DDR (generic): nVidia Corporation|NV11 geForce2 100/200 [DISPLAY_VGA]
unknown         : Linux 2.6.3-7mdk uhci_hcd|UHCI Host Controller [Hub]
unknown         : Logitech Inc.|Cordless Mouse Receiver [Human Interface Devices|Boot Interface Subclass|Mouse]
unknown         : Linux 2.6.3-7mdk uhci_hcd|UHCI Host Controller [Hub]
pwc             : Philips|PCVC740K ToUcam Pro
 
 
grep sound /etc/modprobe.conf :
lias sound-slot-0 snd-via82xx
alias char-major-14-* soundcore
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
 
 
2)
Linux version 2.6.3-7mdk (nplanel@n3.mandrakesoft.com) (gcc version 3.3.2 (Mandrake Linux 10.0 3.3.2-6mdk)) #1 Wed Mar 17 15:56:42 CET 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
 BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
 BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
found SMP MP-table at 000f51a0
hm, page 000f5000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f0000 reserved twice.
hm, page 000f1000 reserved twice.
On node 0 totalpages: 65520
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 61424 pages, LIFO batch:14
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 GBT                                       ) @ 0x000f6a60
ACPI: RSDT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
ACPI: FADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
ACPI: MADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff5d40
ACPI: DSDT (v001 GBT    AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:6 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Processors: 1
Built 1 zonelists
Kernel command line: BOOT_IMAGE=linux ro root=301 devfs=mount acpi=ht resume=/dev/hda5 splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 1474.178 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Memory: 255420k/262080k available (1816k kernel code, 5928k reserved, 849k data, 272k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2924.54 BogoMIPS
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 50k freed
CPU:     After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU:     After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU:     After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 1700+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 20.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00178011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 001 01  0    0    0   0   0    1    1    31
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 001 01  0    0    0   0   0    1    1    51
 06 001 01  0    0    0   0   0    1    1    59
 07 001 01  0    0    0   0   0    1    1    61
 08 001 01  0    0    0   0   0    1    1    69
 09 001 01  0    0    0   0   0    1    1    71
 0a 001 01  1    1    0   1   0    1    1    79
 0b 001 01  1    1    0   1   0    1    1    81
 0c 001 01  1    1    0   1   0    1    1    89
 0d 001 01  0    0    0   0   0    1    1    91
 0e 001 01  0    0    0   0   0    1    1    99
 0f 001 01  0    0    0   0   0    1    1    A1
 10 001 01  1    1    0   1   0    1    1    A9
 11 000 00  1    0    0   0   0    0    0    00
 12 000 00  1    0    0   0   0    0    0    00
 13 000 00  1    0    0   0   0    0    0    00
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ26 -> 0:10
IRQ27 -> 0:11
IRQ28 -> 0:12
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1474.0006 MHz.
..... host bus clock speed is 268.0001 MHz.
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfa2c0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040211
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Disabled
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
PCI->APIC IRQ transform: (B0,I7,P3) -> 27
PCI->APIC IRQ transform: (B0,I7,P3) -> 27
PCI->APIC IRQ transform: (B0,I7,P2) -> 28
PCI->APIC IRQ transform: (B0,I15,P0) -> 27
PCI->APIC IRQ transform: (B1,I5,P0) -> 26
vesafb: framebuffer at 0xe0000000, mapped to 0xd0800000, size 16384k
vesafb: mode is 800x600x16, linelength=1600, pages=3
vesafb: protected mode interface info at c000:0f3e
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
ikconfig 0.7 with /proc/config*
VFS: Disk quotas dquot_6.5.1
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Initializing Cryptographic API
PCI: Enabling Via external APIC routing
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
bootsplash 3.1.4-2004/02/19: looking for picture.... silentjpeg size 14856 bytes, found (800x600, 14808 bytes, v3).
Console: switching to colour frame buffer device 92x32
pty: 1024 Unix98 ptys configured
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
    ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:DMA, hdd:pio
hda: IBM-DPTA-372050, ATA DISK drive
hdb: TOSHIBA DVD-ROM SD-M1302, ATAPI CD/DVD-ROM drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: ASUS CRW-5232AS, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 40088160 sectors (20525 MB) w/1961KiB Cache, CHS=39770/16/63, UDMA(66)
 /dev/ide/host0/bus0/target0/lun0:<4>hda: dma_timer_expiry: dma status == 0x61
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
 
hda: dma_timer_expiry: dma status == 0x61
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
 
 p1 p2 <<4>hda: dma_timer_expiry: dma status == 0x61
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
 
 p5<4>hda: dma_timer_expiry: dma status == 0x61
hda: DMA timeout error
hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
 
 p6 >
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
EISA: Probing bus 0 at eisa0
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 1
BIOS EDD facility v0.13 2004-Mar-09, 1 devices found
Please report your BIOS at http://linux.dell.com/edd/results.html
Resume Machine: resuming from /dev/hda5
Resuming from device hda5
Resume Machine: This is normal swap space
PM: Reading pmdisk image.
PM: Resume from disk failed.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Mounted devfs on /dev
Freeing unused kernel memory: 272k freed
Real Time Clock Driver v1.12
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 27, io base 0000d800
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:07.3: UHCI Host Controller
uhci_hcd 0000:00:07.3: irq 27, io base 0000dc00
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using address 2
Linux video capture interface: v1.00
pwc Philips webcam module version 9.0-BETA-1 loaded.
pwc Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
pwc Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
pwc the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
pwc Philips PCVC740K (ToUCam Pro)/PCVC840 (ToUCam II) USB webcam detected.
pwc Registered as /dev/video0.
drivers/usb/core/usb.c: registered new driver Philips webcam
usb 2-2: new low speed USB device using address 2
Adding 506008k swap on /dev/hda5.  Priority:-1 extents:1
usb 1-1: control timeout on ep0out
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected AMD 761 chipset
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 64M @ 0xe8000000
usb 1-1: control timeout on ep0out
drivers/usb/core/usb.c: registered new driver snd-usb-audio
drivers/usb/core/usb.c: registered new driver hiddev
drivers/usb/input/hid-ff.c: hid_ff_init could not find initializer
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:07.3-2
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
drivers/usb/core/usb.c: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
ts: Compaq touchscreen protocol output
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Supermount version 2.0.4 for kernel 2.6
8139too Fast Ethernet driver 0.9.27
eth0: RealTek RTL8139 at 0xd1910000, 00:40:f4:7b:ef:97, IRQ 27
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
inserting floppy driver for 2.6.3-7mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
hdb: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
ide-floppy driver 0.99.newide
NET: Registered protocol family 17
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes, v3).
bootsplash: status on console 5 changed to on
SCSI subsystem initialized
st: Version 20040122, fixed bufsize 32768, s/g segs 256
mtrr: 0xe0000000,0x2000000 overlaps existing 0xe0000000,0x1000000
pwc Failed to set LED on/off time.
pwc set_video_mode(176x144 @ 10, palette 0).
pwc decode_size = 1.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
PCI: Setting latency timer of device 0000:00:07.5 to 64
NET: Registered protocol family 10
Disabled Privacy Extensions on device c035fe60(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
 
a mon avis, c'est un pb avec le dma...
 
 
3 et 4, c'est cool!!
 
merci!!!

up?

en fait, personne ne m'aime!
 
je sais! c'est paskeu je suis mcsa! c'est du racisme anti crosoft, c'est degueulasse, voila! <;-)