Problème de micro - Multimédia - Linux et OS Alternatifs
Marsh Posté le 18-08-2005 à 22:33:37
tu peux faire : 
cat /dev/dsp ? 
et quand tu parles dans le micro, des caractères s'affichent ? 
La source d'enregistrement est bien le micro ? (verifie avec kmixer par ex)
Marsh Posté le 19-08-2005 à 18:58:44
Un problème ne venant jamais seul, cette après-midi une coupure de courant a éteint ma bécane qui était allumée. Ce soir je la redemare et je n'ai plus de son.  
Je fais ensuite : 
cat /dev/dsp 
et j'ai : 
cat: /dev/dsp: No such file or directory 
Marsh Posté le 19-08-2005 à 19:00:19
En étant root ? 
sinon le lien /dev/dsp n'existe plus. 
La carte son est bien détectée (lspci) ? 
le module de la carte son est bien chargée ? (lsmod)
Marsh Posté le 20-08-2005 à 00:20:49
oui en root. 
Voilà ce que j'obtiens avec lspci : 
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] 
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] 
00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10) 
00:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) 
00:09.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50) 
00:09.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50) 
00:09.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) 
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 
00:0e.0 FireWire (IEEE 1394): Agere Systems (former Lucent Microelectronics) FW323 (rev 04) 
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge 
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 
00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 23) 
00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 23) 
01:00.0 VGA compatible controller: nVidia Corporation NV20 [GeForce3 Ti 200] (rev a3) 
Marsh Posté le 20-08-2005 à 01:28:44
et le module de la carte son "C-Media Electronics Inc CM8738 (rev 10) " est chargé ? 
"lsmod" pour voir les modules chargés
Marsh Posté le 20-08-2005 à 12:35:21
apparemment oui : 
Module                  Size  Used by 
raw                     6720  1 
md5                     3648  1 
ipv6                  232320  16 
rfcomm                 33692  0 
l2cap                  20644  5 rfcomm 
bluetooth              41380  4 rfcomm,l2cap 
snd-usb-audio          65472  1 
snd-usb-lib            13696  1 snd-usb-audio 
snd-seq-dummy           2596  0 
snd-seq-oss            31584  0 
snd-seq-midi-event      6208  1 snd-seq-oss 
snd-seq                47472  5 snd-seq-dummy,snd-seq-oss,snd-seq-midi-event 
snd-pcm-oss            49056  0 
snd-mixer-oss          17248  1 snd-pcm-oss 
snd-cmipci             29216  3 
snd-pcm                80776  4 snd-usb-audio,snd-pcm-oss,snd-cmipci 
snd-page-alloc          7588  1 snd-pcm 
snd-opl3-lib            8832  1 snd-cmipci 
snd-timer              20324  4 snd-seq,snd-pcm,snd-opl3-lib 
snd-hwdep               6880  1 snd-opl3-lib 
gameport                3328  1 snd-cmipci 
snd-mpu401-uart         5920  1 snd-cmipci 
snd-rawmidi            19648  2 snd-usb-lib,snd-mpu401-uart 
snd-seq-device          6796  5 snd-seq-dummy,snd-seq-oss,snd-seq,snd-opl3-lib,snd-rawmidi 
snd                    46980  19 snd-usb-audio,snd-seq-oss,snd-seq,snd-pcm-oss,snd-mixer-oss,snd-cmipci,snd-pcm,snd-opl3-lib,snd-timer,snd-hwdep,snd-mpu401-uart,snd-rawmidi,snd-seq-device 
soundcore               7104  1 snd 
parport_pc             31652  1 
lp                      9864  0 
parport                31624  2 parport_pc,lp 
ipt_TOS                 1888  12 
ipt_REJECT              5600  4 
ipt_pkttype             1248  4 
ipt_LOG                 6208  8 
ipt_state               1376  16 
ipt_multiport           2144  0 
ipt_conntrack           1984  0 
iptable_mangle          2080  1 
ip_nat_irc              1568  0 
ip_nat_tftp             1280  0 
ip_nat_ftp              2272  0 
iptable_nat            19068  3 ip_nat_irc,ip_nat_tftp,ip_nat_ftp 
ip_conntrack_irc       70384  1 ip_nat_irc 
ip_conntrack_tftp       3056  1 ip_nat_tftp 
ip_conntrack_ftp       71344  1 ip_nat_ftp 
ip_conntrack           37400  9 ipt_state,ipt_conntrack,ip_nat_irc,ip_nat_tftp,ip_nat_ftp,iptable_nat,ip_conntrack_irc,ip_conntrack_tftp,ip_conntrack_ftp 
iptable_filter          2144  1 
ip_tables              18176  10 ipt_TOS,ipt_REJECT,ipt_pkttype,ipt_LOG,ipt_state,ipt_multiport,ipt_conntrack,iptable_mangle,iptable_nat,iptable_filter 
af_packet              16232  2 
floppy                 54736  0 
8139too                21408  0 
mii                     4224  1 8139too 
ide-cd                 36772  1 
ohci1394               31076  0 
ieee1394              292152  1 ohci1394 
loop                   13544  0 
nls_iso8859-15          4288  2 
ntfs                  205368  2 
supermount             32660  1 
via-agp                 7424  1 
agpgart                28264  1 via-agp 
synclinkmp             51380  0 
synclink               61048  0 
hdlc                   23392  2 synclinkmp,synclink 
lapb                   13568  1 hdlc 
syncppp                14272  1 hdlc 
generic_serial         11048  0 
stallion               32332  0 
mxser                  41296  0 
moxa                   56716  0 
istallion              34536  0 
esp                    19480  0 
epca                   72448  0 
usblp                  10784  0 
evdev                   7744  0 
tsdev                   6016  0 
usbmouse                4640  0 
ehci-hcd               28648  0 
usbhid                 43712  0 
pwc                    79252  0 
videodev                7264  1 pwc 
uhci-hcd               28944  0 
usbcore               106008  9 snd-usb-audio,snd-usb-lib,usblp,usbmouse,ehci-hcd,usbhid,pwc,uhci-hcd 
ext3                  123304  2 
jbd                    48344  1 ext3 
Marsh Posté le 20-08-2005 à 12:49:04
Je viens de m'apercevoir que ce matin je peux à nouveau écouter les cd, mais le micro ne marche toujours pas. Je refais : cat /dev/dsp, je parle dans le micro et rien ne se passe.
Marsh Posté le 20-08-2005 à 13:03:19
Avec kmix, la source d'enregistrement est bien le micro ?
Marsh Posté le 20-08-2005 à 14:27:45
Dans Kmix : 
onglet sortie : master et PC speaker sont tous les deux au maxi. 
onglet entrée : PCM, synth, line, CD, mic et aux ont le voyant vert allumé. Mic a aussi le voyant rouge allumé. 
onglet interrupteurs : tous les voyants jaunes sont allumés, sauf celui de 3D control-switch
Marsh Posté le 20-08-2005 à 15:34:11
Le micro est bien branché puisqu'il fonctionne bien lorsque je suis sous windows XP. Non je n'ai pas d'autre carte son. Celle-ci est intégrée à la carte-mère.
Marsh Posté le 20-08-2005 à 17:18:46
La sortie son marche ? lecture de mp3 par ex. 
Essaye de ne pas lancer l'interface graphique et de rester en mode console (pour éviter qu'un service type esd interfère avec la carte son) 
et refait la manip : 
cat /dev/dsp en parlant dans le micro.
Marsh Posté le 20-08-2005 à 22:59:09
La sortie son marche puisque je peux écouter mes cd. Je reboot non pas avec l'interface graphique, mais avec "failsafe" donc en mode console. Je tape cat /dev/dsp et la réponse est cette fois-ci no such file or directory 
Marsh Posté le 20-08-2005 à 23:06:33
 le module snd-cmipci est chargé ?
 le module snd-cmipci est chargé ? 
et snd-pcm-oss,snd-mixer-oss  ?
Marsh Posté le 21-08-2005 à 11:50:04
Voilà ce que j'ai au sujet des modules son : 
snd-usb-audio          65472  1 
snd-usb-lib            13696  1 snd-usb-audio 
snd-seq-dummy           2596  0 
snd-seq-oss            31584  0 
snd-seq-midi-event      6208  1 snd-seq-oss 
snd-seq                47472  5 snd-seq-dummy,snd-seq-oss,snd-seq-midi-event 
snd-pcm-oss            49056  0 
snd-mixer-oss          17248  1 snd-pcm-oss 
snd-cmipci             29216  3 
snd-pcm                80776  4 snd-usb-audio,snd-pcm-oss,snd-cmipci 
snd-page-alloc          7588  1 snd-pcm 
snd-opl3-lib            8832  1 snd-cmipci 
snd-timer              20324  4 snd-seq,snd-pcm,snd-opl3-lib 
snd-hwdep               6880  1 snd-opl3-lib 
gameport                3328  1 snd-cmipci 
snd-mpu401-uart         5920  1 snd-cmipci 
snd-rawmidi            19648  2 snd-usb-lib,snd-mpu401-uart 
snd-seq-device          6796  5 snd-seq-dummy,snd-seq-oss,snd-seq,snd-opl3-lib,snd-rawmidi 
snd                    46980  19 snd-usb-audio,snd-seq-oss,snd-seq,snd-pcm-oss,snd-mixer-oss,snd-cmipci,snd-pcm,snd-opl3-lib,snd-timer,snd-hwdep,snd-mpu401-uart,snd-rawmidi,snd-seq-device 
soundcore               7104  1 snd 
Marsh Posté le 21-08-2005 à 11:57:23
et toujours pas de possibilité de faire en tant que root : 
cat /dev/dsp ? 
Ta carte est elle détecté, regarde avec la commande "dmesg" les messages du noyau.
Marsh Posté le 22-08-2005 à 19:09:07
Je n'ai plus le message d'erreur lorsque je fais cat /dev/dsp, mais rien ne se passe lorsque je parle dans le micro. 
La carte son me semble être détectée puisque je la trouve dans le Centre de contrôle de Mandrakelinux : 
 
Identification 
Vendeur: C-Media Electronics Inc 
Description: CM8738 
Classe de matériel: MULTIMEDIA_AUDIO 
Pilote 
Module: snd-cmipci 
Autres pilotes: cmpci 
Connexion 
Bus: PCI 
Bus PCI n°: 0 
Périphérique PCI n°: 5 
Fonction PCI n°: 0 
Identifiant du Vendeur: 5110 
Identifiant du périphérique: 273 
Identifiant secondaire du vendeur: 4163 
Identifiant secondaire du périphérique: 32994 
 
Par contre je ne la vois pas ici (ou ne sais pas la voir) : 
 
dmesg me donne : 
to parent for <NULL>31 
devfs_mk_dev: could not append to parent for <NULL>32 
devfs_mk_dev: could not append to parent for <NULL>33 
devfs_mk_dev: could not append to parent for <NULL>34 
devfs_mk_dev: could not append to parent for <NULL>35 
devfs_mk_dev: could not append to parent for <NULL>36 
devfs_mk_dev: could not append to parent for <NULL>37 
devfs_mk_dev: could not append to parent for <NULL>38 
devfs_mk_dev: could not append to parent for <NULL>39 
devfs_mk_dev: could not append to parent for <NULL>40 
devfs_mk_dev: could not append to parent for <NULL>41 
devfs_mk_dev: could not append to parent for <NULL>42 
devfs_mk_dev: could not append to parent for <NULL>43 
devfs_mk_dev: could not append to parent for <NULL>44 
devfs_mk_dev: could not append to parent for <NULL>45 
devfs_mk_dev: could not append to parent for <NULL>46 
devfs_mk_dev: could not append to parent for <NULL>47 
devfs_mk_dev: could not append to parent for <NULL>48 
devfs_mk_dev: could not append to parent for <NULL>49 
devfs_mk_dev: could not append to parent for <NULL>50 
devfs_mk_dev: could not append to parent for <NULL>51 
devfs_mk_dev: could not append to parent for <NULL>52 
devfs_mk_dev: could not append to parent for <NULL>53 
devfs_mk_dev: could not append to parent for <NULL>54 
devfs_mk_dev: could not append to parent for <NULL>55 
devfs_mk_dev: could not append to parent for <NULL>56 
devfs_mk_dev: could not append to parent for <NULL>57 
devfs_mk_dev: could not append to parent for <NULL>58 
devfs_mk_dev: could not append to parent for <NULL>59 
devfs_mk_dev: could not append to parent for <NULL>60 
devfs_mk_dev: could not append to parent for <NULL>61 
devfs_mk_dev: could not append to parent for <NULL>62 
devfs_mk_dev: could not append to parent for <NULL>63 
devfs_mk_dev: could not append to parent for <NULL>64 
devfs_mk_dev: could not append to parent for <NULL>65 
devfs_mk_dev: could not append to parent for <NULL>66 
devfs_mk_dev: could not append to parent for <NULL>67 
devfs_mk_dev: could not append to parent for <NULL>68 
devfs_mk_dev: could not append to parent for <NULL>69 
devfs_mk_dev: could not append to parent for <NULL>70 
devfs_mk_dev: could not append to parent for <NULL>71 
devfs_mk_dev: could not append to parent for <NULL>72 
devfs_mk_dev: could not append to parent for <NULL>73 
devfs_mk_dev: could not append to parent for <NULL>74 
devfs_mk_dev: could not append to parent for <NULL>75 
devfs_mk_dev: could not append to parent for <NULL>76 
devfs_mk_dev: could not append to parent for <NULL>77 
devfs_mk_dev: could not append to parent for <NULL>78 
devfs_mk_dev: could not append to parent for <NULL>79 
devfs_mk_dev: could not append to parent for <NULL>80 
devfs_mk_dev: could not append to parent for <NULL>81 
devfs_mk_dev: could not append to parent for <NULL>82 
devfs_mk_dev: could not append to parent for <NULL>83 
devfs_mk_dev: could not append to parent for <NULL>84 
devfs_mk_dev: could not append to parent for <NULL>85 
devfs_mk_dev: could not append to parent for <NULL>86 
devfs_mk_dev: could not append to parent for <NULL>87 
devfs_mk_dev: could not append to parent for <NULL>88 
devfs_mk_dev: could not append to parent for <NULL>89 
devfs_mk_dev: could not append to parent for <NULL>90 
devfs_mk_dev: could not append to parent for <NULL>91 
devfs_mk_dev: could not append to parent for <NULL>92 
devfs_mk_dev: could not append to parent for <NULL>93 
devfs_mk_dev: could not append to parent for <NULL>94 
devfs_mk_dev: could not append to parent for <NULL>95 
devfs_mk_dev: could not append to parent for <NULL>96 
devfs_mk_dev: could not append to parent for <NULL>97 
devfs_mk_dev: could not append to parent for <NULL>98 
devfs_mk_dev: could not append to parent for <NULL>99 
devfs_mk_dev: could not append to parent for <NULL>100 
devfs_mk_dev: could not append to parent for <NULL>101 
devfs_mk_dev: could not append to parent for <NULL>102 
devfs_mk_dev: could not append to parent for <NULL>103 
devfs_mk_dev: could not append to parent for <NULL>104 
devfs_mk_dev: could not append to parent for <NULL>105 
devfs_mk_dev: could not append to parent for <NULL>106 
devfs_mk_dev: could not append to parent for <NULL>107 
devfs_mk_dev: could not append to parent for <NULL>108 
devfs_mk_dev: could not append to parent for <NULL>109 
devfs_mk_dev: could not append to parent for <NULL>110 
devfs_mk_dev: could not append to parent for <NULL>111 
devfs_mk_dev: could not append to parent for <NULL>112 
devfs_mk_dev: could not append to parent for <NULL>113 
devfs_mk_dev: could not append to parent for <NULL>114 
devfs_mk_dev: could not append to parent for <NULL>115 
devfs_mk_dev: could not append to parent for <NULL>116 
devfs_mk_dev: could not append to parent for <NULL>117 
devfs_mk_dev: could not append to parent for <NULL>118 
devfs_mk_dev: could not append to parent for <NULL>119 
devfs_mk_dev: could not append to parent for <NULL>120 
devfs_mk_dev: could not append to parent for <NULL>121 
devfs_mk_dev: could not append to parent for <NULL>122 
devfs_mk_dev: could not append to parent for <NULL>123 
devfs_mk_dev: could not append to parent for <NULL>124 
devfs_mk_dev: could not append to parent for <NULL>125 
devfs_mk_dev: could not append to parent for <NULL>126 
devfs_mk_dev: could not append to parent for <NULL>127 
SyncLink MultiPort driver $Revision: 4.29 $, tty major#252 
Linux agpgart interface v0.100 (c) Dave Jones 
agpgart: Detected VIA KT266/KY266x/KT333 chipset 
agpgart: Maximum main memory to use for agp memory: 941M 
agpgart: AGP aperture is 64M @ 0xe0000000 
kjournald starting.  Commit interval 5 seconds 
EXT3 FS on hdb7, internal journal 
EXT3-fs: mounted filesystem with ordered data mode. 
Supermount version 2.0.4 for kernel 2.6 
ntfs: Ignoring new-style parameters in presence of obsolete ones 
NTFS driver 2.1.22 [Flags: R/O DEBUG MODULE]. 
NTFS volume version 3.1. 
NTFS volume version 3.1. 
loop: loaded (max 8 devices) 
ieee1394: Initialized config rom entry `ip1394' 
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org> 
PCI: Found IRQ 10 for device 0000:00:07.0 
PCI: Sharing IRQ 10 with 0000:00:05.0 
PCI: Sharing IRQ 10 with 0000:00:09.2 
PCI: Sharing IRQ 10 with 0000:00:0e.0 
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[d9800000-d98007ff]  Max Packet=[2048] 
PCI: Found IRQ 10 for device 0000:00:0e.0 
PCI: Sharing IRQ 10 with 0000:00:05.0 
PCI: Sharing IRQ 10 with 0000:00:07.0 
PCI: Sharing IRQ 10 with 0000:00:09.2 
ohci1394: fw-host1: Unexpected PCI resource length of 1000! 
ohci1394: fw-host1: OHCI-1394 1.0 (PCI): IRQ=[10]  MMIO=[d7800000-d78007ff]  Max Packet=[2048] 
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e018000002ed5c] 
ieee1394: Host added: ID:BUS[1-00:1023]  GUID[00308d0121d472b2] 
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) 
Uniform CD-ROM driver Revision: 3.20 
hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) 
8139too Fast Ethernet driver 0.9.27 
PCI: Found IRQ 11 for device 0000:00:0d.0 
PCI: Sharing IRQ 11 with 0000:00:09.1 
PCI: Sharing IRQ 11 with 0000:01:00.0 
eth0: RealTek RTL8139 at 0xf8fe0000, 00:a1:b0:01:05:2c, IRQ 11 
eth0:  Identified 8139 chip type 'RTL-8100B/8139D' 
ip_conntrack version 2.1 (8191 buckets, 65528 max) - 248 bytes per conntrack 
ip_tables: (C) 2000-2002 Netfilter core team 
Floppy drive(s): fd0 is 1.44M 
FDC 0 is a post-1991 82077 
NET: Registered protocol family 17 
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 
ip_tables: (C) 2000-2002 Netfilter core team 
ip_conntrack version 2.1 (8191 buckets, 65528 max) - 248 bytes per conntrack 
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] 
parport0: irq 7 detected 
lp0: using parport0 (polling). 
lp0: console ready 
PCI: Found IRQ 10 for device 0000:00:05.0 
PCI: Sharing IRQ 10 with 0000:00:07.0 
PCI: Sharing IRQ 10 with 0000:00:09.2 
PCI: Sharing IRQ 10 with 0000:00:0e.0 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=213.240.223.255 LEN=146 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=631 DPT=631 LEN=126 
usb 3-1: modprobe timed out on ep0out 
usb 3-1: modprobe timed out on ep0out 
usbcore: registered new driver snd-usb-audio 
Bluetooth: Core ver 2.7 
NET: Registered protocol family 31 
Bluetooth: HCI device and connection manager initialized 
Bluetooth: HCI socket layer initialized 
Bluetooth: L2CAP ver 2.7 
Bluetooth: L2CAP socket layer initialized 
Bluetooth: RFCOMM ver 1.5 
Bluetooth: RFCOMM socket layer initialized 
Bluetooth: RFCOMM TTY layer initialized 
NET: Registered protocol family 10 
Disabled Privacy Extensions on device c03b26e0(lo) 
IPv6 over IPv4 tunneling driver 
Disabled Privacy Extensions on device f6d36c00(sit0) 
pwc Failed to set LED on/off time. 
pwc set_video_mode(176x144 @ 10, palette 15). 
pwc decode_size = 1. 
pwc Using alternate setting 1. 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=224.0.0.251 LEN=82 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=62 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=224.0.0.251 LEN=82 TOS=0x00 PREC=0x00 TTL=255 ID=1 DF PROTO=UDP SPT=5353 DPT=5353 LEN=62 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=224.0.0.251 LEN=82 TOS=0x00 PREC=0x00 TTL=255 ID=2 DF PROTO=UDP SPT=5353 DPT=5353 LEN=62 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=224.0.0.251 LEN=117 TOS=0x00 PREC=0x00 TTL=255 ID=3 DF PROTO=UDP SPT=5353 DPT=5353 LEN=97 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=224.0.0.251 LEN=117 TOS=0x00 PREC=0x00 TTL=255 ID=4 DF PROTO=UDP SPT=5353 DPT=5353 LEN=97 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=224.0.0.251 LEN=117 TOS=0x00 PREC=0x00 TTL=255 ID=5 DF PROTO=UDP SPT=5353 DPT=5353 LEN=97 
pwc set_video_mode(160x120 @ 10, palette 15). 
pwc decode_size = 1. 
pwc Using alternate setting 1. 
eth0: no IPv6 routers present 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=224.0.0.251 LEN=117 TOS=0x00 PREC=0x00 TTL=255 ID=6 DF PROTO=UDP SPT=5353 DPT=5353 LEN=97 
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10640 bytes, v3). 
bootsplash: status on console 0 changed to on 
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10640 bytes, v3). 
bootsplash: status on console 1 changed to on 
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10640 bytes, v3). 
bootsplash: status on console 2 changed to on 
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10640 bytes, v3). 
bootsplash: status on console 3 changed to on 
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10640 bytes, v3). 
bootsplash: status on console 4 changed to on 
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10640 bytes, v3). 
bootsplash: status on console 5 changed to on 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=224.0.0.251 LEN=117 TOS=0x00 PREC=0x00 TTL=255 ID=7 DF PROTO=UDP SPT=5353 DPT=5353 LEN=97 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=213.240.223.255 LEN=146 TOS=0x00 PREC=0x00 TTL=64 ID=1 DF PROTO=UDP SPT=631 DPT=631 LEN=126 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=224.0.0.251 LEN=117 TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=97 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=213.240.223.255 LEN=146 TOS=0x00 PREC=0x00 TTL=64 ID=2 DF PROTO=UDP SPT=631 DPT=631 LEN=126 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=224.0.0.251 LEN=117 TOS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=97 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=213.240.223.255 LEN=146 TOS=0x00 PREC=0x00 TTL=64 ID=3 DF PROTO=UDP SPT=631 DPT=631 LEN=126 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=213.240.223.255 LEN=146 TOS=0x00 PREC=0x00 TTL=64 ID=4 DF PROTO=UDP SPT=631 DPT=631 LEN=126 
Shorewall:FORWARD:REJECT:IN=eth0 OUT=eth0 SRC=216.80.111.66 DST=213.240.214.64 LEN=52 TOS=0x00 PREC=0x00 TTL=46 ID=63181 DF PROTO=TCP SPT=45075 DPT=4662 WINDOW=49640 RES=0x00 SYN URGP=0 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=224.0.0.251 LEN=117 TOS=0x00 PREC=0x00 TTL=255 ID=10 DFPROTO=UDP SPT=5353 DPT=5353 LEN=97 
SCSI subsystem initialized 
Shorewall:FORWARD:REJECT:IN=eth0 OUT=eth0 SRC=216.80.111.66 DST=213.240.214.64 LEN=52 TOS=0x00 PREC=0x00 TTL=46 ID=63182 DF PROTO=TCP SPT=45075 DPT=4662 WINDOW=49640 RES=0x00 SYN URGP=0 
Shorewall:FORWARD:REJECT:IN=eth0 OUT=eth0 SRC=216.80.111.66 DST=213.240.214.64 LEN=52 TOS=0x00 PREC=0x00 TTL=46 ID=63183 DF PROTO=TCP SPT=45075 DPT=4662 WINDOW=49640 RES=0x00 SYN URGP=0 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=213.240.223.255 LEN=146 TOS=0x00 PREC=0x00 TTL=64 ID=5 DF PROTO=UDP SPT=631 DPT=631 LEN=126 
Shorewall:FORWARD:REJECT:IN=eth0 OUT=eth0 SRC=216.80.111.66 DST=213.240.214.64 LEN=52 TOS=0x00 PREC=0x00 TTL=46 ID=49189 DF PROTO=TCP SPT=45075 DPT=4662 WINDOW=49640 RES=0x00 SYN URGP=0 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=213.240.223.255 LEN=146 TOS=0x00 PREC=0x00 TTL=64 ID=6 DF PROTO=UDP SPT=631 DPT=631 LEN=126 
Shorewall:FORWARD:REJECT:IN=eth0 OUT=eth0 SRC=84.173.175.147 DST=213.240.214.64 LEN=53 TOS=0x00 PREC=0x00 TTL=50 ID=36275 DF PROTO=UDP SPT=61628 DPT=4570 LEN=33 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=213.240.223.255 LEN=146 TOS=0x00 PREC=0x00 TTL=64 ID=7 DF PROTO=UDP SPT=631 DPT=631 LEN=126 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=213.240.223.255 LEN=146 TOS=0x00 PREC=0x00 TTL=64 ID=8 DF PROTO=UDP SPT=631 DPT=631 LEN=126 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=213.240.223.255 LEN=146 TOS=0x00 PREC=0x00 TTL=64 ID=9 DF PROTO=UDP SPT=631 DPT=631 LEN=126 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=213.240.223.255 LEN=146 TOS=0x00 PREC=0x00 TTL=64 ID=10DF PROTO=UDP SPT=631 DPT=631 LEN=126 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=213.240.223.255 LEN=146 TOS=0x00 PREC=0x00 TTL=64 ID=11DF PROTO=UDP SPT=631 DPT=631 LEN=126 
Shorewall:FORWARD:REJECT:IN=eth0 OUT=eth0 SRC=85.206.104.105 DST=213.240.214.64 LEN=53 TOS=0x00 PREC=0x00 TTL=112 ID=12895 PROTO=UDP SPT=17497 DPT=4570 LEN=33 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=213.240.223.255 LEN=146 TOS=0x00 PREC=0x00 TTL=64 ID=12DF PROTO=UDP SPT=631 DPT=631 LEN=126 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=213.240.223.255 LEN=146 TOS=0x00 PREC=0x00 TTL=64 ID=13DF PROTO=UDP SPT=631 DPT=631 LEN=126 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=213.240.223.255 LEN=146 TOS=0x00 PREC=0x00 TTL=64 ID=14DF PROTO=UDP SPT=631 DPT=631 LEN=126 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=213.240.223.255 LEN=146 TOS=0x00 PREC=0x00 TTL=64 ID=15DF PROTO=UDP SPT=631 DPT=631 LEN=126 
Shorewall:FORWARD:REJECT:IN=eth0 OUT=eth0 SRC=66.37.198.101 DST=213.240.214.64 LEN=47 TOS=0x00 PREC=0x00 TTL=48 ID=13600 DF PROTO=UDP SPT=29703 DPT=4570 LEN=27 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=213.240.223.255 LEN=146 TOS=0x00 PREC=0x00 TTL=64 ID=16DF PROTO=UDP SPT=631 DPT=631 LEN=126 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=213.240.223.255 LEN=146 TOS=0x00 PREC=0x00 TTL=64 ID=17DF PROTO=UDP SPT=631 DPT=631 LEN=126 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=213.240.223.255 LEN=146 TOS=0x00 PREC=0x00 TTL=64 ID=18DF PROTO=UDP SPT=631 DPT=631 LEN=126 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=213.240.223.255 LEN=146 TOS=0x00 PREC=0x00 TTL=64 ID=19DF PROTO=UDP SPT=631 DPT=631 LEN=126 
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=213.240.215.62 DST=213.240.223.255 LEN=146 TOS=0x00 PREC=0x00 TTL=64 ID=20DF PROTO=UDP SPT=631 DPT=631 LEN=126 
Marsh Posté le 22-08-2005 à 19:27:07
Un test à effectuer : 
cat /sbin/ifconfig > /dev/dsp 
Entends tu quelque chose ? 
PS: diminue la puissance de tes HP  
 
PS2: connecté en tant que root évidemment.
Marsh Posté le 24-08-2005 à 20:00:26
Non, je n'entends rien. Voici le message : 
-bash: /dev/dsp: Device or resource busy 
Marsh Posté le 24-08-2005 à 20:35:56
lsof | fgrep /dev/dsp pour voir quel est le programme qui l'utilise
Marsh Posté le 03-09-2005 à 00:02:56
Toujours pas de son et voici le résultat de la dernière commande : 
[root@213-240-222-49 ~]# lsof | fgrep /dev/dsp 
-bash: lsof: command not found 
Marsh Posté le 03-09-2005 à 09:25:11
Il faut installer le paquetage (lsof?) contenant lsof 
Bien sûr cette commande est utile pour savoir quel programme utilise déjà /dev/dsp
Marsh Posté le 09-09-2005 à 22:40:52
J'ai téléchargé lsof et je l'ai installé. Lorsque je tape la commande lsof | fgrep /dev/dsp , rien ne s'affiche.
Marsh Posté le 09-09-2005 à 22:44:43
Oui, est ce que tu as toujours ce message ? 
| Citation : -bash: /dev/dsp: Device or resource busy  | 
 
Marsh Posté le 20-09-2005 à 21:58:35
Non, mais j'ai celui-ci : 
cat: /sbin/iconfig: No such file or directory 
Marsh Posté le 20-09-2005 à 22:13:52
je suis désolé  , le nom du programme est ifconfig (il permet de paramètrer les interfaces réseaux)
, le nom du programme est ifconfig (il permet de paramètrer les interfaces réseaux)
Marsh Posté le 20-09-2005 à 23:09:08
J'entends des bruits très désagréables, mais lorsque je parle dans le micro il ne se passe rien de plus.
Marsh Posté le 20-09-2005 à 23:11:39
| Citation : J'entends des bruits très désagréables | 
 
donc tu peux écrire dans /dev/dsp 
| Citation : lorsque je parle dans le micro il ne se passe rien de plus | 
 
quand tu fais "cat /dev/dsp" et en parlant dans le micro, aucun caractère s'affiche ?
Marsh Posté le 24-09-2005 à 19:18:57
utilises tu alsa ? si c'est le cas, verifie que la source d'enregistrement est bien le micro via alsamixer
Marsh Posté le 24-09-2005 à 19:30:20
Dans mon cas, avec un chipset son qui ne support pas le multisampling hardware, j'utilise Dmix et Dsnoop d'ALSA. 
Ça me permet de mixer d'une façon logiciel les flux d'entrée et aussi les flux de sortie. 
Le son fonctionne donc en Full Duplex, si tu utilises artsd, n'oublie pas de cocher la case Full Duplex. 
 
Voici mon fichier de configuration (à adapter) : http://desintegr.free.fr/autre/divers/asound.conf
Marsh Posté le 26-09-2005 à 23:32:38
J'utilise bien alsa. Je ne sais pas comment faire pour vérifier dans alsamixer si le micro est bien la source d'enregistrement. Par contre c'est le cas quand je vérifie avec Kmix. 
 
Désolé Desintegr, mais je ne comprends rien à ce que tu m'as écrit. C'est beaucoup trop technique pour moi.
Marsh Posté le 23-10-2005 à 22:50:27
Eurêka ! J'ai ouvert Kmix, j'ai cliqué sur l'onglet "interrupteurs" et je les ai désactivés un par un. Et là : miracle!  En désactivant "Mic As Center/LFE" mon micro fonctionne
 En désactivant "Mic As Center/LFE" mon micro fonctionne  
 
Merci à tous les deux d'avoir essayé de m'aider.
Marsh Posté le 18-08-2005 à 22:31:11
J'ai un casque-micro Philips. La partie casque fonctionne très bien mais pas la partie micro. Je suis sur Mandriva LE 2005 et j'avais le même problème sur Mandrake 10.1. Quelqu'un a-t-il une idée ?