Install driver ATI sur mdk10

Install driver ATI sur mdk10 - Hardware - Linux et OS Alternatifs

Marsh Posté le 12-09-2004 à 16:35:15    

Bonjour, je suis assez noobs sous linux et j' ai essayé d' installer les drivers pour ma radeon 9800xt en suivant le HowTo de ati entre autre.
Et biensur, ca marche pas, pourtant pas de méchants messages d' erreurs, juste un ti warning.
voilà si vous pouvez me dire quoi faire, merci bien :)
 


[root@localhost nicolas]# rpm -Uvh fglrx-4.3.0-3.12.0.i386.rpm
Préparation...              ########################################### [100%]
        paquetage fglrx-4.3.0-3.12.0 déjà installé
        le fichier /usr/X11R6/lib/libGL.so.1.2 de l'installation de fglrx-4.3.0-3.12.0 entre en conflit avec le fichier du paquetage libxfree86-4.3-32.1.100mdk
[root@localhost nicolas]# rpm -Uvh --force fglrx-4.3.0-3.12.0.i386.rpm
Préparation...              ########################################### [100%]
   1:fglrx                  ########################################### [100%]
*** Trying to install a precompiled kernel module.
- creating symlink
- recreating module dependency list
- trying a sample load of the kernel module
done.
*** Warning ***
The QT based control panel application did not load in any version.
 ===
ATI display drivers successfully installed
please run 'fglrxconfig' now
 ===


 
Et apres config et redemarrage:
 


[root@localhost nicolas]# fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.3 Mesa 4.0.4


Message édité par smirnoff le 12-09-2004 à 16:52:16
Reply

Marsh Posté le 12-09-2004 à 16:35:15   

Reply

Marsh Posté le 12-09-2004 à 17:21:19    

Salut,
 
Pour installer correctement les drivers ATI, je te conseille de suivre le protocole fourni à cette adresse:
 
http://forums.pcper.com/showthread.php?t=325166

Reply

Marsh Posté le 12-09-2004 à 17:24:50    

pour commencer je te conseil d'aller la: http://www.lea-linux.org/pho/read. [...] 88&t=17430
c'est un très bon topic.
si t'as un chipset nvidia il faut activer l'agpgart au fglrxconfig et charger les modules avant de redémarrer X:
#modprobe fglrx
#modprobe agpgart
#modprobe nvidia-agp
voila ce que je peux te dire en gros mais va voir le topic, il est vraiment bien!!

Reply

Marsh Posté le 12-09-2004 à 17:37:09    

Le Monsieur a dit qu'il voulait installer des drivers ati :o


---------------
"Parfois brutal, toujours loyal"
Reply

Marsh Posté le 12-09-2004 à 19:16:01    

tomake> binom parle juste du support AGP
 


---------------
Mandriva : parce que nous le valons bien ! http://linux-wizard.net/index.php
Reply

Marsh Posté le 14-09-2004 à 10:42:12    

Oki, merci bien, je vais aller voir les liens d' ici peu, pas trop le temps ces temps ci :(

Reply

Marsh Posté le 14-09-2004 à 15:32:02    

>le fichier /usr/X11R6/lib/libGL.so.1.2 de l'installation de >fglrx-4.3.0-3.12.0 entre en conflit avec le fichier du paquetage >libxfree86-4.3-32.1.100mdk  
 
Problème de conflit avec les lib d'Xfree !!
 
Fait un rpm -i --force nom_fichier.rpm pour installer!!

Reply

Marsh Posté le 14-09-2004 à 17:18:47    

il a fait le --force ;)


---------------
Mandriva : parce que nous le valons bien ! http://linux-wizard.net/index.php
Reply

Marsh Posté le 18-09-2004 à 02:06:10    

@helloz everybody
 
Après de longue heures de config, j'arrive enfin à faire fonctionner ma powercolor X800 pro vivo sous linux.
 
J'ai utilisé les derniers drivers dispo suir le site ati.
 
Oui, mais....
 
Je tente de faire fonctionner mes deux écran en dual head, et il n'y en a qu'un qui fonctionne, le deuxième reste déséperement noir !
 
écran 0 = tft Lg sur prise vga de la carte
écran 1 = tft samsung sur prise dvi de la carte.
 
Voici mon XF86Config-4 pour ceux qui auraient une idée de là où ça part en sucette, merci !
 

Code :
  1. # File: XF86Config-4
  2. # File generated by fglrxconfig (C) ATI Research, a substitute for xf86config.
  4. # **********************************************************************
  5. # Refer to the XF86Config(4/5) man page for details about the format of
  6. # this file.
  7. # **********************************************************************
  9. # **********************************************************************
  10. # DRI Section
  11. # **********************************************************************
  12. Section "dri"
  13. # Access to OpenGL ICD is allowed for all users:
  14.     Mode 0666
  15. # Access to OpenGL ICD is restricted to a specific user group:
  16. #    Group 100    # users
  17. #    Mode 0660
  18. EndSection
  20. # **********************************************************************
  21. # Module section -- this  section  is used to specify
  22. # which dynamically loadable modules to load.
  23. # **********************************************************************
  24. #
  25. Section "Module"
  27. # This loads the DBE extension module.
  29.     Load        "dbe"   # Double buffer extension
  31. # This loads the miscellaneous extensions module, and disables
  32. # initialisation of the XFree86-DGA extension within that module.
  33.     SubSection  "extmod"
  34. #      Option    "omit xfree86-dga"
  35.     EndSubSection
  37. # This loads the Type1 and FreeType font modules
  38.     Load        "type1"
  39.     Load        "freetype"
  41. # This loads the GLX module
  42.     Load        "glx"   # libglx.a
  43.     Load        "dri"   # libdri.a
  45. EndSection
  47. # **********************************************************************
  48. # Files section.  This allows default font and rgb paths to be set
  49. # **********************************************************************
  51. Section "Files"
  53. # The location of the RGB database.  Note, this is the name of the
  54. # file minus the extension (like ".txt" or ".db" ).  There is normally
  55. # no need to change the default.
  57.     RgbPath "/usr/X11R6/lib/X11/rgb"
  59. # Multiple FontPath entries are allowed (which are concatenated together),
  60. # as well as specifying multiple comma-separated entries in one FontPath
  61. # command (or a combination of both methods)
  62. #
  63. # If you don't have a floating point coprocessor and emacs, Mosaic or other
  64. # programs take long to start up, try moving the Type1 and Speedo directory
  65. # to the end of this list (or comment them out).
  66. #
  68. #    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
  69.     FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
  70.     FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
  71. #    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
  72.     FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
  73.     FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
  74.     FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
  75. #    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
  77. # The module search path.  The default path is shown here.
  79. #    ModulePath "/usr/X11R6/lib/modules"
  81. EndSection
  83. # **********************************************************************
  84. # Server flags section.
  85. # **********************************************************************
  87. Section "ServerFlags"
  89. # Uncomment this to cause a core dump at the spot where a signal is
  90. # received.  This may leave the console in an unusable state, but may
  91. # provide a better stack trace in the core dump to aid in debugging
  93. #    Option "NoTrapSignals"
  95. # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
  96. # This allows clients to receive this key event.
  98. #    Option "DontZap"
  100. # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
  101. # sequences.  This allows clients to receive these key events.
  103. #    Option "Dont Zoom"
  105. # Uncomment this to disable tuning with the xvidtune client. With
  106. # it the client can still run and fetch card and monitor attributes,
  107. # but it will not be allowed to change them. If it tries it will
  108. # receive a protocol error.
  110. #    Option "DisableVidModeExtension"
  112. # Uncomment this to enable the use of a non-local xvidtune client.
  114. #    Option "AllowNonLocalXvidtune"
  116. # Uncomment this to disable dynamically modifying the input device
  117. # (mouse and keyboard) settings.
  119. #    Option "DisableModInDev"
  121. # Uncomment this to enable the use of a non-local client to
  122. # change the keyboard or mouse settings (currently only xset).
  124. #    Option "AllowNonLocalModInDev"
  126. EndSection
  128. # **********************************************************************
  129. # Input devices
  130. # **********************************************************************
  132. # **********************************************************************
  133. # Core keyboard's InputDevice section
  134. # **********************************************************************
  136. Section "InputDevice"
  138.     Identifier "Keyboard1"
  139.     Driver "Keyboard"
  140. # For most OSs the protocol can be omitted (it defaults to "Standard" ).
  141. # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
  142. # uncomment the following line.
  144. #    Option "Protocol"   "Xqueue"
  146.     Option "AutoRepeat" "500 30"
  148. # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
  149. #    Option "Xleds"      "1 2 3"
  151. #    Option "LeftAlt"    "Meta"
  152. #    Option "RightAlt"   "ModeShift"
  154. # To customise the XKB settings to suit your keyboard, modify the
  155. # lines below (which are the defaults).  For example, for a non-U.S.
  156. # keyboard, you will probably want to use:
  157. #    Option "XkbModel"   "pc102"
  158. # If you have a US Microsoft Natural keyboard, you can use:
  159. #    Option "XkbModel"   "microsoft"
  160. #
  161. # Then to change the language, change the Layout setting.
  162. # For example, a german layout can be obtained with:
  163. #    Option "XkbLayout"  "de"
  164. # or:
  165. #    Option "XkbLayout"  "de"
  166. #    Option "XkbVariant" "nodeadkeys"
  167. #
  168. # If you'd like to switch the positions of your capslock and
  169. # control keys, use:
  170. #    Option "XkbOptions" "ctrl:swapcaps"
  172. # These are the default XKB settings for XFree86
  173. #    Option "XkbRules"   "xfree86"
  174. #    Option "XkbModel"   "pc101"
  175. #    Option "XkbLayout"  "us"
  176. #    Option "XkbVariant" ""
  177. #    Option "XkbOptions" ""
  179. #    Option "XkbDisable"
  181.     Option "XkbRules" "xfree86"
  182.     Option "XkbModel" "microsoft"
  183.     Option "XkbLayout" "fr"
  185. EndSection
  188. # **********************************************************************
  189. # Core Pointer's InputDevice section
  190. # **********************************************************************
  192. Section "InputDevice"
  194. # Identifier and driver
  196.     Identifier "Mouse1"
  197.     Driver "mouse"
  198.     Option "Protocol"   "ExplorerPS/2"
  199.     Option "Device"     "/dev/mouse"
  200.     Option "ZAxisMapping" "4 5"
  201.     Option "Emulate3Buttons" "no"
  203. # When using XQUEUE, comment out the above two lines, and uncomment
  204. # the following line.
  206. #    Option "Protocol"   "Xqueue"
  208. # Baudrate and SampleRate are only for some Logitech mice. In
  209. # almost every case these lines should be omitted.
  211. #    Option "BaudRate"   "9600"
  212. #    Option "SampleRate" "150"
  214. # Emulate3Buttons is an option for 2-button Microsoft mice
  215. # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
  217. #    Option "Emulate3Timeout"    "50"
  219. # ChordMiddle is an option for some 3-button Logitech mice
  221. #    Option "ChordMiddle"
  223. EndSection
  226. # **********************************************************************
  227. # Other input device sections
  228. # this is optional and is required only if you
  229. # are using extended input devices.  This is for example only.  Refer
  230. # to the XF86Config man page for a description of the options.
  231. # **********************************************************************
  232. #
  233. # Section "InputDevice"
  234. #    Identifier  "Mouse2"
  235. #    Driver      "mouse"
  236. #    Option      "Protocol"      "MouseMan"
  237. #    Option      "Device"        "/dev/mouse2"
  238. # EndSection
  239. #
  240. # Section "InputDevice"
  241. #    Identifier "spaceball"
  242. #    Driver     "magellan"
  243. #    Option     "Device"         "/dev/cua0"
  244. # EndSection
  245. #
  246. # Section "InputDevice"
  247. #    Identifier "spaceball2"
  248. #    Driver     "spaceorb"
  249. #    Option     "Device"         "/dev/cua0"
  250. # EndSection
  251. #
  252. # Section "InputDevice"
  253. #    Identifier "touchscreen0"
  254. #    Driver     "microtouch"
  255. #    Option     "Device"         "/dev/ttyS0"
  256. #    Option     "MinX"           "1412"
  257. #    Option     "MaxX"           "15184"
  258. #    Option     "MinY"           "15372"
  259. #    Option     "MaxY"           "1230"
  260. #    Option     "ScreenNumber"   "0"
  261. #    Option     "ReportingMode"  "Scaled"
  262. #    Option     "ButtonNumber"   "1"
  263. #    Option     "SendCoreEvents"
  264. # EndSection
  265. #
  266. # Section "InputDevice"
  267. #    Identifier "touchscreen1"
  268. #    Driver     "elo2300"
  269. #    Option     "Device"         "/dev/ttyS0"
  270. #    Option     "MinX"           "231"
  271. #    Option     "MaxX"           "3868"
  272. #    Option     "MinY"           "3858"
  273. #    Option     "MaxY"           "272"
  274. #    Option     "ScreenNumber"   "0"
  275. #    Option     "ReportingMode"  "Scaled"
  276. #    Option     "ButtonThreshold"    "17"
  277. #    Option     "ButtonNumber"   "1"
  278. #    Option     "SendCoreEvents"
  279. # EndSection
  281. # **********************************************************************
  282. # Monitor section
  283. # **********************************************************************
  285. # Any number of monitor sections may be present
  287. Section "Monitor"
  288.     Identifier  "Monitor0"  # Le premier écran (HPL1820 sur port VGA)
  289.     HorizSync   30-80
  290.     VertRefresh 56-75
  291.     Option "DPMS"
  293. # === mode lines based on GTF ===
  294. # VGA @ 100Hz
  295. # Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
  296. # SVGA @ 100Hz
  297. # Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
  298. # XVGA @ 100Hz
  299. # Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
  300. # 1152x864 @ 60Hz
  301. # Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
  302. # 1152x864 @ 85Hz
  303. # Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
  304. # 1152x864 @ 100Hz
  305. # Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
  306. # 1280x960 @ 75Hz
  307. # Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
  308. # 1280x960 @ 100Hz
  309. # Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
  310. # SXGA @ 100Hz
  311. # Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
  312. # SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
  313. # Modeline "GDM-1950"  109.62  1280 1336 1472 1720  1024 1024 1026 1062 -hsync -vsync
  314. # 1600x1000 @ 60Hz
  315. # Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
  316. # 1600x1000 @ 75Hz
  317. # Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
  318. # 1600x1000 @ 85Hz
  319. # Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
  320. # 1600x1000 @ 100Hz
  321. # Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
  322. # 1600x1024 @ 60Hz
  323. # Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
  324. # 1600x1024 @ 75Hz
  325. # Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
  326. # 1600x1024 @ 76Hz
  327. # Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
  328. # 1600x1024 @ 85Hz
  329. # Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
  330. # 1920x1080 @ 60Hz
  331. # Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
  332. # 1920x1080 @ 75Hz
  333. # Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
  334. # 1920x1200 @ 60Hz
  335. # Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
  336. # 1920x1200 @ 75Hz
  337. # Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
  338. # 2048x1536 @ 60
  339. # Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
  340. # 2048x1536 @ 60
  341. # Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
  342. # 1400x1050 @ 60Hz M9 Laptop mode
  343. # ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
  344. # 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
  345. # Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
  346. # 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
  347. # Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync
  349. EndSection
  351. # Specs and modelines for the second monitor
  352. Section "Monitor"
  353.     Identifier  "Monitor1" # Le deuxième écran (Samsung 191T sur port DVI)
  354.     HorizSync   30 - 80  # According the manufacture specs!
  355.     VertRefresh 56 - 85  # According the manufacture specs!
  356.     Option "DPMS"
  357. EndSection
  358.    
  359.    
  360. # **********************************************************************
  361. # Graphics device section
  362. # **********************************************************************
  364. # Any number of graphics device sections may be present
  366. # Standard VGA Device:
  368. Section "Device"
  369.     Identifier  "Standard VGA"
  370.     VendorName  "Unknown"
  371.     BoardName   "Unknown"
  373. # The chipset line is optional in most cases.  It can be used to override
  374. # the driver's chipset detection, and should not normally be specified.
  376. #    Chipset     "generic"
  378. # The Driver line must be present.  When using run-time loadable driver
  379. # modules, this line instructs the server to load the specified driver
  380. # module.  Even when not using loadable driver modules, this line
  381. # indicates which driver should interpret the information in this section.
  383.     Driver      "vga"
  384. # The BusID line is used to specify which of possibly multiple devices
  385. # this section is intended for.  When this line isn't present, a device
  386. # section can only match up with the primary video device.  For PCI
  387. # devices a line like the following could be used.  This line should not
  388. # normally be included unless there is more than one video device
  389. # installed.
  391. #    BusID       "PCI:0:10:0"
  393. #    VideoRam    256
  395. #    Clocks      25.2 28.3
  397. EndSection
  399. # === ATI device section ===
  401. Section "Device"
  402.     Identifier                          "ATI Graphics Adapter 0"
  403.     Driver                              "fglrx"
  404. # ### generic DRI settings ###
  405. # === disable PnP Monitor  ===
  406.     #Option                              "NoDDC"
  407. # === disable/enable XAA/DRI ===
  408.     Option "no_accel"                   "no"
  409.     Option "no_dri"                     "no"
  410. # === misc DRI settings ===
  411.     Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
  412. # ### FireGL DDX driver module specific settings ###
  413. # === Screen Management ===
  414.     Option "DesktopSetup"               "0x00000000"
  415.     Option "MonitorLayout"              "CRT, TMDS"
  416.     Option "IgnoreEDID"                 "off"
  417.     Option "HSync2"                     "30 - 80"
  418.     Option "VRefresh2"                  "56 - 75"
  419.     Option "ScreenOverlap"              "0"
  420. # === TV-out Management ===
  421.     Option "NoTV"                       "yes"   
  422.     Option "TVStandard"                 "PAL-B"   
  423.     Option "TVHSizeAdj"                 "0"   
  424.     Option "TVVSizeAdj"                 "0"   
  425.     Option "TVHPosAdj"                  "0"   
  426.     Option "TVVPosAdj"                  "0"   
  427.     Option "TVHStartAdj"                "0"   
  428.     Option "TVColorAdj"                 "0"   
  429.     Option "GammaCorrectionI"           "0x00000000"
  430.     Option "GammaCorrectionII"          "0x00000000"
  431. # === OpenGL specific profiles/settings ===
  432.     Option "Capabilities"               "0x00000000"
  433. # === Video Overlay for the Xv extension ===
  434.     Option "VideoOverlay"               "on"
  435. # === OpenGL Overlay ===
  436. # Note: When OpenGL Overlay is enabled, Video Overlay
  437. #       will be disabled automatically
  438.     Option "OpenGLOverlay"              "off"
  439. # === Center Mode (Laptops only) ===
  440.     Option "CenterMode"                 "off"
  441. # === Pseudo Color Visuals (8-bit visuals) ===
  442.     Option "PseudoColorVisuals"         "off"
  443. # === QBS Management ===
  444.     Option "Stereo"                     "off"
  445.     Option "StereoSyncEnable"           "1"
  446. # === FSAA Management ===
  447.     Option "FSAAEnable"                 "yes"
  448.     Option "FSAAScale"                  "2"
  449.     Option "FSAADisableGamma"           "no"
  450.     Option "FSAACustomizeMSPos"         "no"
  451.     Option "FSAAMSPosX0"                "0.000000"
  452.     Option "FSAAMSPosY0"                "0.000000"
  453.     Option "FSAAMSPosX1"                "0.000000"
  454.     Option "FSAAMSPosY1"                "0.000000"
  455.     Option "FSAAMSPosX2"                "0.000000"
  456.     Option "FSAAMSPosY2"                "0.000000"
  457.     Option "FSAAMSPosX3"                "0.000000"
  458.     Option "FSAAMSPosY3"                "0.000000"
  459.     Option "FSAAMSPosX4"                "0.000000"
  460.     Option "FSAAMSPosY4"                "0.000000"
  461.     Option "FSAAMSPosX5"                "0.000000"
  462.     Option "FSAAMSPosY5"                "0.000000"
  463. # === Misc Options ===
  464.     Option "UseFastTLS"                 "0"
  465.     Option "BlockSignalsOnLock"         "on"
  466.     Option "UseInternalAGPGART"         "no"
  467.     Option "ForceGenericCPU"            "no"
  468.     Option "EnablePrivateBackZ"         "yes" # Enable on both heads for FSAA
  469.     BusID "PCI:3:0:0"    # ATI primary Device 4a49
  470.     Screen 0
  471. EndSection
  473. # Device section for the second head
  474. # Options are copied from the first head for the fglrx driver.
  475. # You can only configure FSAA.
  477. Section "Device"
  478.     Identifier                          "ATI Graphics Adapter 1"
  479.     Driver                              "fglrx"
  480. # === Screen Management ===
  481.     Option "DesktopSetup"               "0x00000000"    #Don't change this for dualhead
  482. # === FSAA Management ===
  483. # If you have no FSAA options on your second Device, then by default you won't have FSAA
  484. # on the second head.
  485.     Option "FSAAEnable"                 "no" # Disable FSAA on second head
  486.     Option "FSAAScale"                  "1" # Disable FSAA on second head
  487.     Option "FSAADisableGamma"           "no"
  488.     Option "FSAACustomizeMSPos"         "no"
  489.     Option "FSAAMSPosX0"                "0.000000"
  490.     Option "FSAAMSPosY0"                "0.000000"
  491.     Option "FSAAMSPosX1"                "0.000000"
  492.     Option "FSAAMSPosY1"                "0.000000"
  493.     Option "FSAAMSPosX2"                "0.000000"
  494.     Option "FSAAMSPosY2"                "0.000000"
  495.     Option "FSAAMSPosX3"                "0.000000"
  496.     Option "FSAAMSPosY3"                "0.000000"
  497.     Option "FSAAMSPosX4"                "0.000000"
  498.     Option "FSAAMSPosY4"                "0.000000"
  499.     Option "FSAAMSPosX5"                "0.000000"
  500.     Option "FSAAMSPosY5"                "0.000000"
  501. # === Misc Options ===
  502.     Option "EnablePrivateBackZ"         "yes" # Enable on both heads for FSAA
  503.     BusID "PCI:3:0:0"    # Ati secondary Device 4a69
  504.     Screen 1 # This refers to second head
  505. EndSection
  508. # **********************************************************************
  509. # Screen sections
  510. # **********************************************************************
  512. # Any number of screen sections may be present.  Each describes
  513. # the configuration of a single screen.  A single specific screen section
  514. # may be specified from the X server command line with the "-screen"
  515. # option.
  516. Section "Screen"
  517.     Identifier  "Screen0"
  518.     Device      "ATI Graphics Adapter 0"
  519.     Monitor     "Monitor0"
  520.     DefaultDepth 24
  521.     #Option "backingstore"
  523.     Subsection "Display"
  524.         Depth       24
  525.         Modes       "1280x1024" "1024x768" "800x600" "640x480"
  526.         ViewPort    0 0  # initial origin if mode is smaller than desktop
  527. #        Virtual     1280 1024
  528.     EndSubsection
  529. EndSection
  531. Section "Screen"
  532.     Identifier  "Screen1"
  533.     Device      "ATI Graphics Adapter 1" # Device to use
  534.     Monitor     "Monitor1" # Monitor description it will use
  535.     DefaultDepth 24
  536.     #Option "backingstore"
  538.     Subsection "Display"
  539.         Depth       24
  540.         Modes       "1280x1024" "1024x768" "800x600" "640x480"
  541.         ViewPort    0 0  # initial origin if mode is smaller than desktop
  542. #        Virtual     1280 1024
  543.     EndSubsection
  544. EndSection
  546. # **********************************************************************
  547. # ServerLayout sections.
  548. # **********************************************************************
  550. # Any number of ServerLayout sections may be present.  Each describes
  551. # the way multiple screens are organised.  A specific ServerLayout
  552. # section may be specified from the X server command line with the
  553. # "-layout" option.  In the absence of this, the first section is used.
  554. # When now ServerLayout section is present, the first Screen section
  555. # is used alone.
  557. Section "ServerLayout"
  559. # The Identifier line must be present
  560.     Identifier  "Server Layout"
  562. # Each Screen line specifies a Screen section name, and optionally
  563. # the relative position of other screens.  The four names after
  564. # primary screen name are the screens to the top, bottom, left and right
  565. # of the primary screen.
  567.     Screen "Screen0"
  568.     Screen "Screen1" LeftOf "Screen0" # ecran 1 à gauche de l'écran 0
  569.    
  570. # Each InputDevice line specifies an InputDevice section name and
  571. # optionally some options to specify the way the device is to be
  572. # used.  Those options include "CorePointer", "CoreKeyboard" and
  573. # "SendCoreEvents".
  575.     InputDevice "Mouse1" "CorePointer"
  576.     InputDevice "Keyboard1" "CoreKeyboard"
  578. EndSection
  580. ### EOF ###

Reply

Marsh Posté le 28-09-2004 à 09:51:54    

Bon, entre temps il y a eu de l'amélioration.
 
J'arrive à obtenir le clone mode (deux écrans identiques !) mais le plus intérressant serait le mode Big Desktop (Xinerama quoi)
 
J'arrive à le faire fonctionner à une petite erreur près: les deux écran sont identiques au lieu d'avoir un écran gauche et un écran droit !
 
Je poste mon nouveau XF86Config ce soir si tout va bien.

Reply

Sujets relatifs:

Leave a Replay

Make sure you enter the(*)required information where indicate.HTML code is not allowed