Tyan S2722GN - carte mère bi-Xéon P4 [VDS] - Hardware - Achats & Ventes
Marsh Posté le 13-07-2004 à 10:34:29
ReplyMarsh Posté le 13-07-2004 à 10:46:46
Intéressant ![[:gratgrat] [:gratgrat]](https://forum-images.hardware.fr/images/perso/gratgrat.gif) 
 
Manque juste les procos + la ram + l'argent (mais pas la crèmière car c'est un crémier ![[:joce] [:joce]](https://forum-images.hardware.fr/images/perso/joce.gif) )
) 
 
Belle bête 
Marsh Posté le 13-07-2004 à 11:00:41
ReplyMarsh Posté le 13-07-2004 à 11:04:36
parfaitement  
 
 
testé lors de qques LANs chez des amis BZHs avec 50 personnes en simultané + des bots ... la machine ne sourcille pas.
Marsh Posté le 21-07-2004 à 11:52:51
ReplyMarsh Posté le 22-07-2004 à 22:33:16
Reply
Marsh Posté le 13-07-2004 à 08:41:54
salut,
 --> cette carte mère est garantie constructeur pendant encore au moins 2 ans
 --> cette carte mère est garantie constructeur pendant encore au moins 2 ans  
 
![[:ddr555] [:ddr555]](https://forum-images.hardware.fr/images/perso/ddr555.gif) 
 
je vend une Tyan S2722GN, acheté il y a ~1 an neuve sur le forum http://forum.smp-fr.com à Dockinou.
normalement, j'ai encore la facture ou bien la lette de cession
la carte mère est vendue nue, sans accessoires (de toute manière, il n'y en avait pas bcp mis à part les nappes et les vis ... je fournis bien évidemment le CDrom qui va avec bien que je ne m'en soit pas servi
description de la carte mère :
Processor
 Dual mPGA603 ZIF sockets
 Supports up to two Intel® Xeon processors
with 512KB of integrated L2 cache
 Onboard VRM (VRM 9.1 spec)
 Front-Side Bus support for 400MHz
Chipset
 Intel® E7500 server chipset
 MCH + ICH3 + P64H2 + FWH
 Intel® P64H2 supports two PCI(-X) buses
 Winbond W83627HF Super I/O chip
 Winbond W83782D hardware monitoring chip
Memory
 Four 184-pin 2.5V DDR DIMM sockets
 Supports up to 8GB of Registered DDR200
 Dual channel memory bus
 Supports Registered memory only
 Supports ECC type memory modules
Expansion Slots
 Three independent PCI(-X) buses
 Two 64-bit 133/100/66MHz (3.3V) PCI-X slots
 One 32-bit 33MHz (5V) PCI slot
 Total of three usable slots
Integrated I/O
 One floppy connector supports up to two drives
 Two 9-pin serial ports
(one connector and one header)
 One 25-pin ECP/EPP/SPP parallel header (opt.)
 Four USB 1.1 ports (two rear, two via header)
 PS/2 keyboard and mouse connectors
Integrated PCI IDE
 Provides two PCI bus master channels for
up to four Enhanced IDE (EIDE) devices
 Support for ATA-100/66/33 IDE drives
and ATAPI-compliant devices
Integrated LAN Controllers
 Intel® 82551QM Fast Ethernet controller
- One RJ-45 LAN connector with LEDs
System Management
 Total of seven 3-pin fan headers
 Six fan headers with tachometer monitoring
 One 3-pin chassis intrusion header
 Temperature, voltage, and fan monitoring
 Watchdog timer
 System Monitoring Software: here
Server Management (option)
 QLogic Zircon Baseboard Management
Controller (BMC) based on powerful ARM7
technology
 Tailored for IPMI highest 1.5 Spec.
 Supports KCS and BT styles
 Supports flexible Windows and Linux based
Management Solution
 Supports RMCP and SNMP protocols
 Supports ASF standard and EMP
 I2 C serial multi-master controllers and UARTs
 Built-in IPMB connector
 Supports remote Power on/off and reset support
(IPMI over LAN)
 Server Management Daughter card via built-in
2x25 header
Integrated Video
 ATI Rage XL PCI graphics controller
 8MB of video memory
BIOS
 AMI BIOS 8.0 on 4Mbit Flash ROM
 LAN remote boot (PXE) and SMBIOS v2.3
 BIOS Boot Specification v3.1 (BBS) support
 Auto configuration of IDE hard drive types
Form Factor
 ATX footprint (12" x 9.8", 304.8 x 248.92mm)
 ATX12V/EPS12V universal power connector
 Side-by-side serial (one) and VGA (one) port
 Stacked USB (two) connectors
 Side-by-side RJ-45 LAN connectors
 Stacked PS/2, keyboard, and mouse connectors
Regulatory
 FCC Class B (Declaration of Conformity)
 European Community CE
ceci est une carte mère de serveur, elle n'est pas du tout faite pour le jeu !!
le prix désiré : 130  en main propre sur paris.
j'envoie éventuellement par la poste, mais les frais d'envois sont à la charge de l'acheteur.
Message édité par jm@rc le 06-08-2004 à 19:29:57
---------------
Porsche 951 - Club944