[RESOLU] netasq F60 - probleme de mise en fonctionnement

netasq F60 - probleme de mise en fonctionnement [RESOLU] - Réseaux - Systèmes & Réseaux Pro

Marsh Posté le 09-02-2013 à 15:26:49    

Bonjour à tous !!
 
dites, je viens de recevoir un netasq F60 d'occasion, et je suis face à un probleme de fonctionnement...
 
je m'y suis connecté via le port série, j'ai réinitialisé le password admin, jusqu'ici tout est OK.
par contre apres le reboot, le système me bombarde de lignes indiquant un probleme....
 
Kernel modules successfully loaded.
 
 
 
ASQ Initialization...pid 566 (ennetwork), uid 0: exited on signal 6
Abort trap
Assertion failedp: (fw_libcrypto_iis_init() == 1),d function fwlice nce_read , file /6usr/home/build/f5w-8.1.0/crossplatfor9m/lib/libncrypto /licence.c,  line( 2379.
buildfilter), uid 0: exited on signal 6
Abort trap
Done
 
Starting daemons....
pid 667 (asqd), uid 0: exited on signal 6
 
Configuration: servicepid 666 (hardwared), uid 0: exited on signal 6
 
Warning: dumpcert failed, skip next config.
pid 713 (buildfilter), uid 0: exited on signal 6
pid 725 (asqd), uid 0: exited on signal 6
pid 727 (asqd), uid 0: exited on signal 6
Assertion failedp: (fw_libcrypto_iis_init() == 1),d function fwlice nce_load insectio7n, file /usr/hom3e/bu0ild/fw-8.1.0/cro ssplatform/lib/l(ibncrypto/l icencge.c, line 362.
etconf), uid 0: exited on signal 6
Abort trap
[: -eq: unexpected operator
pid 740 (getconf), uid 0: exited on signal 6
Abort trap
 
pid 731 (hardwared), uid 0: exited on signal 6
Assertion failedp: (fw_libcrypto_iis_init() == 1),d function fwcryp to_get_v alue, fi7le /usr/home/bui6ld/f0w-8.1.0/crosspla tform/lib/libncr(ypto/materi al.c,g line 1370.
etmodel), uid 0: exited on signal 6
Assertion failedp: (fw_libcrypto_iis_init() == 1),d function fwcryp to_get_v alue, fi7le /usr/home/bui6ld/f2w-8.1.0/crosspla tform/lib/libncr(ypto/materi al.c,g line 1370.
etmodel), uid 0: exited on signal 6
Abort
Firewall software version 8.1.0
 
port       name NS-BSD   state  address
   1        out   fxp1      up
   2         in   fxp0 no-link
   3       dmz1   fxp2 no-link
   4       dmz2   fxp3 no-link
 
System is now ready.
 
pid 770 (asqd), uid 0: exited on signal 6
 
FreeBSD (Amnesiac) (ttyd0)
 
login: pid 767 (hardwared), uid 0: exited on signal 6
pid 772 (asqd), uid 0: exited on signal 6
pid 774 (hardwared), uid 0: exited on signal 6
pid 775 (asqd), uid 0: exited on signal 6
pid 777 (hardwared), uid 0: exited on signal 6
pid 778 (asqd), uid 0: exited on signal 6
pid 780 (hardwared), uid 0: exited on signal 6
pid 781 (asqd), uid 0: exited on signal 6
pid 783 (hardwared), uid 0: exited on signal 6
pid 784 (asqd), uid 0: exited on signal 6
pid 786 (hardwared), uid 0: exited on signal 6
pid 787 (asqd), uid 0: exited on signal 6
pid 790 (asqd), uid 0: exited on signal 6
pid 789 (hardwared), uid 0: exited on signal 6
 
 
et ça continue en permanence....
 
je me logue en tant qu'admin, et là les interfaces réseaux ne recupere aucune adresse...jamais.... et netstat -r ne renvoi aucune route....
 
est ce que quelqu'un aurait deja été confronté au probleme???


Message édité par rodrigo35 le 10-02-2013 à 11:53:21
Reply

Marsh Posté le 09-02-2013 à 15:26:49   

Reply

Marsh Posté le 09-02-2013 à 15:36:56    

voici le resultat d'un ifconfig:
 
 
ifconfig
fxp0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=b<RXCSUM,TXCSUM,VLAN_MTU>
        ether 00:0d:b4:01:a7:aa
        media: Ethernet autoselect (100baseTX <full-duplex> )
        status: active
fxp1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=b<RXCSUM,TXCSUM,VLAN_MTU>
        ether 00:0d:b4:01:a7:ab
        media: Ethernet autoselect (100baseTX <full-duplex> )
        status: active
fxp2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=b<RXCSUM,TXCSUM,VLAN_MTU>
        ether 00:0d:b4:01:a7:ac
        media: Ethernet autoselect (100baseTX <full-duplex> )
        status: active
fxp3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=b<RXCSUM,TXCSUM,VLAN_MTU>
        ether 00:0d:b4:01:a7:ad
        media: Ethernet autoselect (100baseTX <full-duplex> )
        status: active
lo0: flags=8008<LOOPBACK,MULTICAST> mtu 16384
lo1: flags=8008<LOOPBACK,MULTICAST> mtu 16384
lo2: flags=8008<LOOPBACK,MULTICAST> mtu 16384
lo3: flags=8008<LOOPBACK,MULTICAST> mtu 16384
lo4: flags=8008<LOOPBACK,MULTICAST> mtu 16384
lo5: flags=8008<LOOPBACK,MULTICAST> mtu 16384
enc0: flags=0<> mtu 1536
ng0: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500
ng1: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500
ng2: flagps=8890<POINTOPOIiNT,NOARP,SIMPLEXd,MULTICAST> mtu  1500
ng3: flags8=8890<POINTOPOIN6T,NOARP,SIMPLEX,9MULTICAST> mtu 1 500
ng4: flags=(8890<POINTOPOINTa,NOARP,SIMPLEX,MsULTICAST> mtu 15q00
ng5: flags=8d890<POINTOPOINT,)NOARP,SIMPLEX,MU,LTICAST> mtu 150 0
ng6: flags=88u90<POINTOPOINT,NiOARP,SIMPLEX,MULdTICAST> mtu 1500
eg7: flags=88900<POINTOPOINT,NO:ARP,SIMPLEX,MULT ICAST> mtu 1500
 ng8: flags=8890x<POINTOPOINT,NOAiRP,SIMPLEX,MULTItCAST> mtu 1500
eng9: flags=8890<dPOINTOPOINT,NOAR P,SIMPLEX,MULTICoAST> mtu 1500
nng10: flags=8890< POINTOPOINT,NOARsP,SIMPLEX,MULTICiAST> mtu 1500
ngg11: flags=8890<nPOINTOPOINT,NOARaP,SIMPLEX,MULTIClAST> mtu 1500
P,SIMPLEX,MULTIC0<6POINTOPOINT,NOAR
                AST> mtu 1500
ng13: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500
ng14: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500
ng15: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500
ng16: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500
ng17: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500
ng18: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500
ng19: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500
vlan0: flags=8002<BROADCAST,MULTICAST> mtu 1500
        ether 00:00:00:00:00:00
        vlan: 0 parent interface: <none>
vlan1: flags=8002<BROADCAST,MULTICAST> mtu 1500
        ether 00:00:00:00:00:00
        vlan: 0 parent interface: <none>
vlan2: flags=8002<BROADCAST,MULTICAST> mtu 1500
        ether 00:00:00:00:00:00
        vlan: 0 parent interface: <none>
vlan3: flags=8002<BROADCAST,MULTICAST> mtu 1500
        ether 00:00:00:00:00:00
        vlan: 0 parent interface: <none>

Reply

Marsh Posté le 09-02-2013 à 17:02:50    

voici les actions faites:
 
defaultconfig pour remettre le systeme en mode usine -> OK
tentative de connection via netasq manager -> echec
 
est ce que qqn sait comment je peux forcer une interface a passer en dhcp? car j'ai l'impression que le probleme vient clairement de la.... aucune interface n'a d'IP.... et pas moyen de trouver comment lui en donner une depuis la CLI....
 

Reply

Marsh Posté le 10-02-2013 à 11:52:16    

Hello, alors au final:
 
1) defaultconfig pour remettre en parametres usine
si ça ne fonctionne pas
2) débrancher -> ouvrir le netasq (sans rompre la bande de garantie, probablement la partie la plus compliquée) -> déplacer le jumper qui est a coté de la pile bios -> une quinzaine de secondes -> remettre le tout en place -> enjoy !!

Reply

Sujets relatifs:

Leave a Replay

Make sure you enter the(*)required information where indicate.HTML code is not allowed