Local machine info: Mac OS X version = 10.6.6(10J3204a) IP Address:127.0.0.1 ASD version:3S148
==========================================================
==========================================================
ASD Log activity from [04/24/16 11:15:00] to [04/24/16 12:10:36]
==========================================================
[04/24/16 11:15:00] * TESTING STARTED *
[04/24/16 11:15:00]  Custom: Hardware Existence Check (test #2) - Hardware Existence Check
  - Verifies non-configurable hardware existance.
[11:15:00]  Test Passed
[04/24/16 11:15:00]  Main Logic Board: Check POST Results (test #1) - Check POST Results
  - Check Results of POST from last reboot.
[11:15:00]  Test Passed
[04/24/16 11:15:00]  Battery: Unconsumed Battery Capacity Test (test #31) - Unconsumed Battery Capacity Test
  - Checks Battery has completed less cycles than design-cycle-count and maximum capacity is greater than 80% of designed capacity.
[11:15:00]  ERROR -- 255 [Unknown result-code 0xff] -- TEST FAILED
[04/24/16 11:15:00] * 1 TEST(S) FAILED * [Elapsed time = 00:00:00]
==========================================================
[04/24/16 11:15:22] * TESTING STARTED *
[04/24/16 11:15:22]  Boot ROM: Boot ROM FW GUID MAC Addr Checksum Test (test #2) - Boot ROM FW GUID MAC Addr Checksum Test
  - Verify the Boot ROM FW GUID MAC address checksum.
[11:15:22]  Test Passed
[04/24/16 11:15:22]  Battery (test #1) - Check Battery Installed
  - Checks for the presence of a battery.
[11:15:22]  Test Passed
[04/24/16 11:15:22]  Battery (test #51) - ATV Table Test
  - Checks to see if the Battery is using the programmed  ATV Table.
[11:15:22]  Test Passed
[04/24/16 11:15:22]  SMC (test #7) - SMC EPM check
  - Check to ensure that UV and CV EPM blocks are programmed.
[11:15:22]  Test Passed
[04/24/16 11:15:22]  SMC (test #1) - SMC PID Sensor check
  - Checks the SMC PID Sensor warning counter that is monitoring sensors of each PID loop for erratic behaviour.
[11:15:22]  Test Passed
[04/24/16 11:15:22]  Display: EDID Checksum Test (test #30) - EDID Checksum Test
  - Calculate EDID checksum
[11:15:22]  Test Passed
[04/24/16 11:15:22]  Temperature (TB0T) -- Battery TS MAX (test #1) - Sensor Reads Within Operating Range (Temperature)
  - Check to ensure that sensor reads within operating range.
[11:15:22]  Test Passed
[04/24/16 11:15:22]  Temperature (TB1T) -- Battery TS 1 (test #1) - Sensor Reads Within Operating Range (Temperature)
  - Check to ensure that sensor reads within operating range.
[11:15:22]  Test Passed
[04/24/16 11:15:22]  Temperature (TB2T) -- Battery TS 2 (test #1) - Sensor Reads Within Operating Range (Temperature)
  - Check to ensure that sensor reads within operating range.
[11:15:22]  Test Passed
[04/24/16 11:15:22]  Temperature (TC0C) -- CPU Die - Digital Core 0 (test #1) - Sensor Reads Within Operating Range (Temperature)
  - Check to ensure that sensor reads within operating range.
[11:15:22]  Test Passed
[04/24/16 11:15:22]  Temperature (TC0D) -- CPU 0 Die Analog (test #1) - Sensor Reads Within Operating Range (Temperature)
  - Check to ensure that sensor reads within operating range.
[11:15:22]  Test Passed
[04/24/16 11:15:22]  Temperature (TC0P) -- CPU Proximity (test #1) - Sensor Reads Within Operating Range (Temperature)
  - Check to ensure that sensor reads within operating range.
[11:15:22]  Test Passed
[04/24/16 11:15:22]  Temperature (TM0P) -- Battery Charger Proximity (test #1) - Sensor Reads Within Operating Range (Temperature)
  - Check to ensure that sensor reads within operating range.
[11:15:22]  Test Passed
[04/24/16 11:15:22]  Temperature (TP0P) -- PCH Proximity (test #1) - Sensor Reads Within Operating Range (Temperature)
  - Check to ensure that sensor reads within operating range.
[11:15:22]  Test Passed
[04/24/16 11:15:22]  Temperature (Th1H) -- Right Fin Stack Proximity (test #1) - Sensor Reads Within Operating Range (Temperature)
  - Check to ensure that sensor reads within operating range.
[11:15:22]  Test Passed
[04/24/16 11:15:22]  Temperature (Ts0P) -- Palm Rest (test #1) - Sensor Reads Within Operating Range (Temperature)
  - Check to ensure that sensor reads within operating range.
[11:15:22]  Test Passed
[04/24/16 11:15:22]  Voltage (VC0C) -- CPU V Core (test #1) - Sensor Reads Within Operating Range (Voltage)
  - Check to ensure that sensor reads within operating range.
[11:15:22]  Test Passed
[04/24/16 11:15:22]  Voltage (VD0R) -- DC in Rail 0 (test #1) - Sensor Reads Within Operating Range (Voltage)
  - Check to ensure that sensor reads within operating range.
[11:15:23]  Test Passed
[04/24/16 11:15:23]  Voltage (VN0R) -- MCP VCore (test #1) - Sensor Reads Within Operating Range (Voltage)
  - Check to ensure that sensor reads within operating range.
[11:15:23]  Test Passed
[04/24/16 11:15:23]  Voltage (VP0R) -- PBus (test #1) - Sensor Reads Within Operating Range (Voltage)
  - Check to ensure that sensor reads within operating range.
[11:15:23]  ERROR -- 2 [Sensor reading above alarm point] -- TEST FAILED
[04/24/16 11:15:23]  Current (IB0r) -- Battery (test #1) - Sensor Reads Within Operating Range (Current)
  - Check to ensure that sensor reads within operating range.
[11:15:23]  Test Passed
[04/24/16 11:15:23]  Current (IC0R) -- Computing (Combined cores) (test #1) - Sensor Reads Within Operating Range (Current)
  - Check to ensure that sensor reads within operating range.
[11:15:23]  Test Passed
[04/24/16 11:15:23]  Current (ID0R) -- DC In (test #1) - Sensor Reads Within Operating Range (Current)
  - Check to ensure that sensor reads within operating range.
[11:15:23]  Test Passed
[04/24/16 11:15:23]  Current (IO0R) -- Other <5V, 3.3V> (test #1) - Sensor Reads Within Operating Range (Current)
  - Check to ensure that sensor reads within operating range.
[11:15:23]  Test Passed
[04/24/16 11:15:23]  Bluetooth (test #1) - USB Interface Test
  - Verifies USB interface between host and Bluetooth module.
[11:15:33]  Test Passed
[04/24/16 11:15:33]  Bluetooth (test #2) - MAC Address Verification Test
  - Verifies the Bluetooth MAC address is not all 00s or all FFs.
[11:15:36]  Test Passed
[04/24/16 11:15:36]  Bluetooth (test #4) - Bluetooth Power Cycle Test
  - Verifies USB interface between host and Bluetooth module after performing a Bluetooth power cycle.
[11:15:47]  Test Passed
[04/24/16 11:15:47]  AirPort (test #1) - MAC Address Verification Test
  - Verifies the AirPort MAC address is not all 00s or all FFs.
[11:15:47]  Test Passed
[04/24/16 11:15:47]  AirPort (test #3) - AirPort Power Cycle Test
  - The test performs an AirPort power off and power on cycle.  It then verifies AirPort by performing wireless scan.
[11:15:54]  Test Passed
[04/24/16 11:15:54]  Product (test #2) - System Serial Number Format Verification Test
  - Verifies that a correctly formatted system serial number has been burned into the unit.
[11:15:54]  Test Passed
[04/24/16 11:15:54]  Product (test #3) - Sleep / Wake Test
  - Verifies that a unit can automatically sleep and wake using the OS sleepx tool.
[11:19:17]  Test Passed
[04/24/16 11:19:17]  Thunderbolt Port (test #1) - ThunderboltPort Interface Test
  - Get port status for each lane on the Thunderbolt port.
[11:19:20]  Test Passed
[04/24/16 11:19:20]  Thunderbolt Port (test #2) - ThunderboltPort Error Register Check Test
  - Read error register on each lane of Thunderbolt port (HEC error register ...).
[11:19:20]  Test Passed
[04/24/16 11:19:20]  Thunderbolt (test #1) - Thunderbolt PCI Interface Test
  - Verify Thunderbolt presence in io registry as a pci device.
[11:19:20]  Test Passed
[04/24/16 11:19:20]  Thunderbolt (test #2) - Thunderbolt Sleep Wake Test
  - Verify Thunderbolt pci interface is maintained over sleep wake cycle.
[11:22:02]  Test Passed
[04/24/16 11:22:02]  Thunderbolt (test #3) - Thunderbolt Error Register Check Test
  - Read error registers and verifies errors within limit.
[11:22:02]  Test Passed
[04/24/16 11:22:02]  Thunderbolt (test #4) - Thunderbolt Internal Loopback Test
  - Enable internal loopback and verifies different patterns of data are sent, received and no mismatch.
[11:22:02]  Test Passed
[04/24/16 11:22:02]  Fan Motor: Exhaust (test #4) - Turn On Automatically
  - System turns on fan motor and verifies fan motor can reach minimum/maximum values
[11:22:31]  Test Passed
[04/24/16 11:22:31]  Quick Fan motor Test (test #5) - Quick Fan motor Test
  - System verifies that the fan motor is running to target speed
[11:22:31]  Test Passed
[04/24/16 11:22:31]  Fan motor Stall Test (test #6) - Fan motor Stall Test
  - System verifies that the fan motor can run above fan motor stall speed
[11:22:31]  Test Passed
[04/24/16 11:22:31]  Ethernet Controller: Built-in (test #1) - MAC Address Verification Test
  - Verifies the Ethernet MAC address is not all 00s or all FFs.
[11:22:31]  Test Passed
[04/24/16 11:22:31]  Ethernet Controller: Built-in (test #10) - MAC Loopback Test
  - Verifies no data mismatch between sent and received while looping within MAC.
[11:22:49]  Test Passed
[04/24/16 11:22:49]  Ethernet Controller: Built-in (test #11) - PHY 1000 Loopback Test
  - Verifies no data mismatch between sent and received while via PHY at 1000 Mbps.
[11:23:06]  Test Passed
[04/24/16 11:23:06]  Ethernet Controller: Built-in (test #12) - PHY 100 Loopback Test
  - Verifies no mismatch between data sent and looped back via PHY at 100 Mbps.
[11:23:30]  Test Passed
[04/24/16 11:23:30]  Ethernet Controller: Built-in (test #13) - PHY 10 Loopback Test
  - Verifies no mismatch between data sent and looped back via PHY at 10 Mbps.
[11:24:00]  Test Passed
[04/24/16 11:24:00]  Ethernet Controller: Built-in (test #20) - Jumbo Packet PHY Loopback Test
  - Verifies no mismatch between data sent and looped back in jumbo packet via PHY at the highest supported speed.
[11:24:38]  Test Passed
[04/24/16 11:24:38]  Video Controller: Built-in (test #2) - OpenGL Point Test
  - Render Points
[11:24:46]  Test Passed
[04/24/16 11:24:46]  Video Controller: Built-in (test #3) - OpenGL Line Test
  - Render Lines
[11:24:53]  Test Passed
[04/24/16 11:24:53]  Video Controller: Built-in (test #4) - OpenGL Triangle Test
  - Render Triangles
[11:24:59]  Test Passed
[04/24/16 11:24:59]  Video Controller: Built-in (test #5) - OpenGL Quad Test
  - Render Quads
[11:25:05]  Test Passed
[04/24/16 11:25:05]  Video Controller: Built-in (test #6) - OpenGL Quad with Texture Test
  - Render Quads with Textures
[11:25:25]  Test Passed
[04/24/16 11:25:25]  Video Controller: Built-in (test #7) - OpenGL Rectangle Test
  - Render Rectangles
[11:25:31]  Test Passed
[04/24/16 11:25:31]  Video Controller: Built-in (test #8) - OpenGL Cube Test
  - Render Cubes
[11:25:38]  Test Passed
[04/24/16 11:25:38]  Video Controller: Built-in (test #9) - OpenGL Cube with Fog Test
  - Render Cube with Fog
[11:25:44]  Test Passed
[04/24/16 11:25:44]  Video Controller: Built-in (test #10) - OpenGL Wireframe Model Test
  - Render Wireframe Model
[11:25:50]  Test Passed
[04/24/16 11:25:50]  Video Controller: Built-in (test #11) - OpenGL Solid Red Model Test
  - Render Solid Red Model
[11:25:57]  Test Passed
[04/24/16 11:25:57]  Video Controller: Built-in (test #12) - OpenGL Solid Red Model with Fog Test
  - Render Solid Red Model with Fog
[11:26:04]  Test Passed
[04/24/16 11:26:04]  Video Controller: Built-in (test #70) - Fragment Instruction Test
  - Tests each instruction of the ARB fragment program instruction by doing calculation and comparing actual against expected
[11:26:37]  Test Passed
[04/24/16 11:26:37]  Video Controller: Built-in (test #72) - Fill Rect 2D Acceleration Test
  - Tests hw accelerated fill rect by filling screen with many rects, calculating checksum, and comparing actual against expected
[11:26:43]  Test Passed
[04/24/16 11:26:43]  Video Controller: Built-in (test #73) - Copy Region 2D Acceleration Test
  - Tests hw accelerated copy region by copying various size of regions many times, calcuating checksum, and comparing actual against expected
[11:26:49]  Test Passed
[04/24/16 11:26:49]  Video Controller: Built-in (test #74) - Copy Rect 2D Acceleration Test
  - Tests hw accelerated copy rect by copying various size of rects many times, calcuating checksum, and comparing actual against expected
[11:26:55]  Test Passed
[04/24/16 11:26:55]  Video Controller: Built-in (test #2) - OpenGL Point Test
  - Render Points
[11:27:01]  Test Passed
[04/24/16 11:27:01]  Video Controller: Built-in (test #3) - OpenGL Line Test
  - Render Lines
[11:27:08]  Test Passed
[04/24/16 11:27:08]  Video Controller: Built-in (test #4) - OpenGL Triangle Test
  - Render Triangles
[11:27:14]  Test Passed
[04/24/16 11:27:14]  Video Controller: Built-in (test #5) - OpenGL Quad Test
  - Render Quads
[11:27:20]  Test Passed
[04/24/16 11:27:20]  Video Controller: Built-in (test #6) - OpenGL Quad with Texture Test
  - Render Quads with Textures
[11:27:26]  Test Passed
[04/24/16 11:27:26]  Video Controller: Built-in (test #7) - OpenGL Rectangle Test
  - Render Rectangles
[11:27:32]  Test Passed
[04/24/16 11:27:33]  Video Controller: Built-in (test #8) - OpenGL Cube Test
  - Render Cubes
[11:27:39]  Test Passed
[04/24/16 11:27:39]  Video Controller: Built-in (test #9) - OpenGL Cube with Fog Test
  - Render Cube with Fog
[11:27:45]  Test Passed
[04/24/16 11:27:45]  Video Controller: Built-in (test #10) - OpenGL Wireframe Model Test
  - Render Wireframe Model
[11:27:51]  Test Passed
[04/24/16 11:27:52]  Video Controller: Built-in (test #11) - OpenGL Solid Red Model Test
  - Render Solid Red Model
[11:27:58]  Test Passed
[04/24/16 11:27:58]  Video Controller: Built-in (test #12) - OpenGL Solid Red Model with Fog Test
  - Render Solid Red Model with Fog
[11:28:05]  Test Passed
[04/24/16 11:28:05]  Video Controller: Built-in (test #70) - Fragment Instruction Test
  - Tests each instruction of the ARB fragment program instruction by doing calculation and comparing actual against expected
[11:28:29]  Test Passed
[04/24/16 11:28:29]  Video Controller: Built-in (test #72) - Fill Rect 2D Acceleration Test
  - "Tests hw accelerated fill rect by filling screen with many rects, calcuating checksum, and comparing actual against expected"#TEST
[11:28:35]  Test Passed
[04/24/16 11:28:35]  Video Controller: Built-in (test #74) - Copy Rect 2D Acceleration Test
  - Tests hw accelerated copy rect by copying various size of rects many times, calcuating checksum, and comparing actual against expected
[11:28:41]  Test Passed
[04/24/16 11:28:41]  Thermal Interface - Processor:Processor0: TIM Test 75 percent GB (test #4) - TIM Test 75 percent GB
  - Check that CPU heatsink is properly attached, using product spec theta dh + 75 percent guardband.
[11:29:08]  ERROR -- 1 [Theta dh too high] -- TEST FAILED
[04/24/16 11:29:08]  Processor: 0 (test #1) - Whetstone Test
  - Concurrent whetstone floating point unit benchmark test
[11:29:40]  Test Passed
[04/24/16 11:29:40]  Processor: 0 (test #2) - Dhrystone Test
  - Concurrent dhrystone integer unit benchmark test
[11:30:15]  Test Passed
[04/24/16 11:30:15]  Processor: 0 (test #3) - Linpack Test
  - Concurrent linpack floating point benchmark test
[11:30:55]  Test Passed
[04/24/16 11:30:55]  Processor: 0 (test #5) - Encoder Test
  - Uses MPEG2 encoder optimized for Intel processor to encode a short video clip twice, and verifies the two results are identical
[11:31:48]  Test Passed
[04/24/16 11:31:48]  Memory (test #10) - Main Memory Self-refresh test
  - Tests Memory before and after a sleep wake cycle testing the memory's self-refresh.
[11:39:47]  Test Passed
[04/24/16 11:39:47]  Memory (test #11) - Main Memory Self-refresh Hibernation Test
  - Tests Memory before and after a hibernate wake cycle testing the memory's self-refresh.
[11:44:43]  Test Passed
[04/24/16 11:44:44]  Memory (test #30) - Apple 64 Memory Address As Data test
  - Perform Apple simple memory test task under 64-bits environment.
[11:49:00]  Test Passed
[04/24/16 11:49:01]  Memory (test #31) - Apple 64 Memory Random Pattern test
  - Perform Apple simple memory test task under 64-bits environment.
[11:49:53]  Test Passed
[04/24/16 11:49:54]  Memory (test #32) - Apple 64 Memory Sequential Increment test
  - Perform Apple simple memory test task under 64-bits environment.
[11:50:20]  Test Passed
[04/24/16 11:50:21]  Memory (test #33) - Apple 64 Memory Block Checkerboard test
  - Perform Apple simple memory test task under 64-bits environment.
[11:52:01]  Test Passed
[04/24/16 11:52:02]  Memory (test #34) - Apple 64 Memory Bit Checkerboard test
  - Perform Apple simple memory test task under 64-bits environment.
[11:53:13]  Test Passed
[04/24/16 11:53:14]  Memory (test #35) - Apple 64 Memory Sequential Byte Block test
  - Perform Apple simple memory test task under 64-bits environment.
[11:58:29]  Test Passed
[04/24/16 11:58:29]  Memory (test #36) - Apple 64 Memory Walking Ones test
  - Perform Apple simple memory test task under 64-bits environment.
[12:02:33]  Test Passed
[04/24/16 12:02:34]  Memory (test #37) - Apple 64 Memory Walking Zeros test
  - Perform Apple simple memory test task under 64-bits environment.
[12:05:07]  Test Passed
[04/24/16 12:05:07]  Memory (test #38) - Apple 64 Memory Walking Spread Bits test
  - Perform Apple simple memory test task under 64-bits environment.
[12:08:07]  Test Passed
[04/24/16 12:08:07]  Memory (test #39) - Apple 64 Memory Walking Bit Flip test
  - Perform Apple simple memory test task under 64-bits environment.
[12:10:35]  Test Passed
[04/24/16 12:10:35]  Hard Drive - Internal: Check SMART status (test #5) - Check SMART status
  - Check the SMART status of a device.
[12:10:36]  ERROR - -33000 [Wrong drive type.] -- TEST FAILED
[04/24/16 12:10:36] * 3 TEST(S) FAILED * [Elapsed time = 00:55:13]