Jai installé MAndrake 7.1 sur un PC et la carte reseau a été reconnue à l'instalation. Les autres PC ont un reseau normal. A l'ouverture de Linux, une erreur eth0 et je ne sais pas comment faire pourr accéder au reseau.
Si quelqu'un à une idée, je suis novice en linux    
@+

quelle erreur ??

Bringing Up delaying interface eth0....
c'est Marqué failed après

c'est quoi comme carte ?
surement un problème de driver

3com Etherlink II isa (3C509b)en plug & play
A l'installation, il l'avait reconnue

isa ....
tu as installé la package isapnp ?
 
et vérifie que le fichier /etc/isapnp.conf existe ...

[edit]--Message édité par XDMJ--[/edit]

a mon avis c un probleme d'irq... verifie ca...

isapnp.gone il y a mais pas .conf

c'est pour ça ...
 
faut utiliser pnpdump ...

j'ai le pac isapnptools d'instalé aussi

dejà essaye de voir ce que donne pnpdump ..

cé quoi pnpdump ?

je vois que tu fais du icq ...
ce sera plus simple non ??

pas vraiement non

bon déjà installe le package isapnp avec le cd de la mandrake ..
 
en root :
 
mount /mnt/cdrom
cd /mnt/cdrom/Mandrake/RPMS
rpm -i isapnp....   (enfin la bonne version quoi !!)

[edit]--Message édité par XDMJ--[/edit]

cé fait

et pnpdump, il dit quoi ??

/root]# pnpdump # $Id: pnpdump.c,v 1.21 1999/12/09 22:28:33 fox Exp $ # Release isapnptools-1.21b (library isapnptools-1.21b) # # This is free software, see the sources for details. # This software has NO WARRANTY, use at your OWN RISK # # For details of the output file format, see isapnp.conf(5) # # For latest information and FAQ on isapnp and pnpdump see: # http://www.roestock.demon.co.uk/isapnptools/ # # Compiler flags:  -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR # (for   library:  -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR) # # Trying port address 0273 # Board 1 has serial identifier 81 ff ff ff ff 20 00 a8 65 # Board 2 has serial identifier 0d af 5e 25 fa 95 50 6d 50  
# (DEBUG) (READPORT 0x0273) (ISOLATE PRESERVE) (IDENTIFY *) (VERBOSITY 2) (CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING  
# Card 1: (serial identifier 81 ff ff ff ff 20 00 a8 65) # Vendor Id YMH0020, No Serial Number (-1), checksum 0x81. # Version 1.0, Vendor version 0.0 # ANSI string -->OPL3-SA3 Sound Board<-- # # Logical device id YMH0021 # # Edit the entries below to uncomment out the configuration required. # Note that only the first value of any range is given, this may be changed if r
equired # Don't forget to uncomment the activate (ACT Y) when happy  
(CONFIGURE YMH0020/-1 (LD 0  
# Multiple choice time, choose one only !  
#     Start dependent functions: priority preferred #       Logical device decodes 16 bit IO address lines #             Minimum IO base address 0x0220 #             Maximum IO base address 0x0220 #             IO base alignment 16 bytes #             Number of IO addresses required: 16 # (IO 0 (SIZE 16) (BASE 0x0220)) #       Logical device decodes 16 bit IO address lines #             Minimum IO base address 0x0530 #             Maximum IO base address 0x0530 #             IO base alignment 8 bytes #             Number of IO addresses required: 8 # (IO 1 (SIZE 8) (BASE 0x0530)) #       Logical device decodes 16 bit IO address lines #             Minimum IO base address 0x0388 #             Maximum IO base address 0x0388 #             IO base alignment 8 bytes #             Number of IO addresses required: 8 # (IO 2 (SIZE 8) (BASE 0x0388)) #       Logical device decodes 16 bit IO address lines #             Minimum IO base address 0x0330 #             Maximum IO base address 0x0330 #             IO base alignment 2 bytes #             Number of IO addresses required: 2 # (IO 3 (SIZE 2) (BASE 0x0330)) #       Logical device decodes 16 bit IO address lines #             Minimum IO base address 0x0370 #             Maximum IO base address 0x0370 #             IO base alignment 2 bytes #             Number of IO addresses required: 2 # (IO 4 (SIZE 2) (BASE 0x0370)) #       IRQ 5. #             High true, edge sensitive interrupt # (INT 0 (IRQ 5 (MODE +E))) #       First DMA channel 0. #             8 bit DMA only #             Logical device is a bus master #             DMA may execute in count by byte mode #             DMA may not execute in count by word mode #             DMA channel speed type F # (DMA 0 (CHANNEL 0)) #       Next DMA channel 1. #             8 bit DMA only #             Logical device is a bus master #             DMA may execute in count by byte mode #             DMA may not execute in count by word mode #             DMA channel speed type F # (DMA 1 (CHANNEL 1))  
#       Start dependent functions: priority acceptable #       Logical device decodes 16 bit IO address lines #             Minimum IO base address 0x0240 #             Maximum IO base address 0x0240 #             IO base alignment 16 bytes #             Number of IO addresses required: 16 # (IO 0 (SIZE 16) (BASE 0x0240)) #       Logical device decodes 16 bit IO address lines #             Minimum IO base address 0x0e80 #             Maximum IO base address 0x0e80 #             IO base alignment 8 bytes #             Number of IO addresses required: 8 # (IO 1 (SIZE 8) (BASE 0x0e80)) #       Logical device decodes 16 bit IO address lines #             Minimum IO base address 0x0388 #             Maximum IO base address 0x0388 #             IO base alignment 8 bytes #             Number of IO addresses required: 8 # (IO 2 (SIZE 8) (BASE 0x0388)) #       Logical device decodes 16 bit IO address lines #             Minimum IO base address 0x0300 #             Maximum IO base address 0x0300 #             IO base alignment 2 bytes #             Number of IO addresses required: 2 # (IO 3 (SIZE 2) (BASE 0x0300)) #       Logical device decodes 16 bit IO address lines #             Minimum IO base address 0x0100 #             Maximum IO base address 0x0ffe #             IO base alignment 2 bytes #             Number of IO addresses required: 2 # (IO 4 (SIZE 2) (BASE 0x0100)) #       IRQ 5, 7, 9, 10 or 11. #             High true, edge sensitive interrupt # (INT 0 (IRQ 5 (MODE +E))) #       First DMA channel 0, 1 or 3. #             8 bit DMA only #             Logical device is a bus master #             DMA may execute in count by byte mode #             DMA may not execute in count by word mode #             DMA channel speed type F # (DMA 0 (CHANNEL 0)) #       Next DMA channel 0, 1 or 3. #             8 bit DMA only #             Logical device is a bus master #             DMA may execute in count by byte mode #             DMA may not execute in count by word mode #             DMA channel speed type F # (DMA 1 (CHANNEL 0))  
#       Start dependent functions: priority functional #       Logical device decodes 16 bit IO address lines #             Minimum IO base address 0x0220 #             Maximum IO base address 0x0280 #             IO base alignment 16 bytes #             Number of IO addresses required: 16 # (IO 0 (SIZE 16) (BASE 0x0220)) #       Logical device decodes 16 bit IO address lines #             Minimum IO base address 0x0530 #             Maximum IO base address 0x0f48 #             IO base alignment 8 bytes #             Number of IO addresses required: 8 # (IO 1 (SIZE 8) (BASE 0x0530)) #       Logical device decodes 16 bit IO address lines #             Minimum IO base address 0x0388 #             Maximum IO base address 0x03f8 #             IO base alignment 8 bytes #             Number of IO addresses required: 8 # (IO 2 (SIZE 8) (BASE 0x0388)) #       Logical device decodes 16 bit IO address lines #             Minimum IO base address 0x0300 #             Maximum IO base address 0x0334 #             IO base alignment 2 bytes #             Number of IO addresses required: 2 # (IO 3 (SIZE 2) (BASE 0x0300)) #       Logical device decodes 16 bit IO address lines #             Minimum IO base address 0x0100 #             Maximum IO base address 0x0ffe #             IO base alignment 2 bytes #             Number of IO addresses required: 2 # (IO 4 (SIZE 2) (BASE 0x0100)) #       IRQ 3, 5, 7, 9, 10 or 11. #             High true, edge sensitive interrupt # (INT 0 (IRQ 3 (MODE +E))) #       First DMA channel 0, 1 or 3. #             8 bit DMA only #             Logical device is not a bus master #             DMA may execute in count by byte mode #             DMA may not execute in count by word mode #             DMA                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                # Card 2: (serial identifier 0d af 5e 25 fa 95 50 6d 50) # Vendor Id TCM5095, Serial Number 2942182906, checksum 0x0D. #     Version 1.0, Vendor version 1.0 #     ANSI string -->3Com 3C509B EtherLink III<-- # # Logical device id TCM5095 #     Device supports I/O range check register #     Device supports vendor reserved register @ 0x38 #     Device supports vendor reserved register @ 0x39 #     Device supports vendor reserved register @ 0x3a #     Device supports vendor reserved register @ 0x3b #     Device supports vendor reserved register @ 0x3c #     Device supports vendor reserved register @ 0x3d #     Device supports vendor reserved register @ 0x3e # equired # Don't forget to uncomment the activate (ACT Y) when happy  
(CONFIGURE TCM5095/2942182906 (LD 0 #     Compatible device id PNP80f7 #     IRQ 3, 5, 7, 9, 10, 11, 12 or 15. #         High true, edge sensitive interrupt (by default) # (INT 0 (IRQ 3 (MODE +E))) #     Logical device decodes 16 bit IO address lines #         Minimum IO base address 0x0210 #         Maximum IO base address 0x03e0 #         IO base alignment 16 bytes #         Number of IO addresses required: 16 # (IO 0 (SIZE 16) (BASE 0x0210) (CHECK))  (NAME "TCM5095/2942182906[0]{3Com 3C509B EtherLink III}" ) # (ACT Y) )) # End tag... Checksum 0x00 (OK)  
# Returns all cards to the "Wait for Key" state (WAITFORKEY) [root@slave2 /root]#