salut a tous
 
j'ai un probleme avec ma tnt 2 ultra
apres l'install de la mdk 8, j'ai utilise xfdrake pour configurer xfree, mais lorsque je selectionne tnt 2 ultra, j'ai droit au message suivant :
The following packages contain XFree86-: XFree86-Mono XFree86-devel XFree86-ISO8859-2 XFree86-ISO8859-9 XFree86-100dpi-fonts XFree86-ISO8859-9-75dpi-fonts XFree86-Mach32 XFree86-3DLabs XFree86-8514 XFree86-Mach64 XFree86-SVGA XFree86-ISO8859-2-100dpi-fonts XFree86-ISO8859-9-100dpi-fonts XFree86-server-common XFree86-cyrillic-fonts XFree86-P9000 XFree86-S3 XFree86-S3V XFree86-libs XFree86-FBDev XFree86-ISO8859-2-75dpi-fonts XFree86-xfs XFree86-I128 XFree86-W32 XFree86-Mach8 XFree86-ISO8859-2-Type1-fonts XFree86-server XFree86-Xvfb XFree86-doc XFree86-glide-module XFree86-static-libs XFree86-75dpi-fonts XFree86 XFree86-AGX XFree86-Xnest XFree86-VGA16
 
server  is not available (should be in /usr/X11R6/bin/XF86_) at /usr/lib/libDrakX/Xconfigurator.pm line 385.
 
quel serveur faut-il installer ?
 
si je choisis tnt 2 tout court, ca passe.
 
je suis donc alle chercher les drivers de nvidia et les ai installe suivant la procedure exlique par dark schneider, mais j'ai encore un probleme : quand je demarre X, il me renvoie sur la console avec comme erreur :
(EE) NVIDIA(0): Failed to initialize the NVdriver kernel module!
(EE) NVIDIA(0):  *** Aborting ***
(II) UnloadModule: "nvidia"
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(EE) Screen(s) found, but none have a usable configuration.
 
Fatal server error:
no screens found
 
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.
 
pourtant tout est bon lors de l'installation
 
que faut-il faire ?

> XFdrake --expert
sélectionne XFree 4.0.3
> rpm -qa | grep XFree
enlève les rpm ayant une version 3.3.6
refais l'install des drivers nvidia. ES tu sûr que tout s'est bien passé ?

j'ai deja selectionne la 4.0.3, j'ai aucun package de la 3.3.6
j'ai refait l'install des drivers (la seule etape que je ne fais pas est celle du nettoyage des fichiers en trop) et toujours pareil
 
par contre quand je fais xdpyinfo | grep "XFree86 version" , je n'ai aucun resultat
pour  lsmod | grep NVdriver j'ai NVdriver  714128  0
 
donc aucun changement

> XFree86 -version
 
tu peux aussi me donner la liste de package donné par :
> rpm -qa | grep XFree

XFree86 -version
 
XFree86 Version 4.0.3 / X Window System
(protocol Version 11, revision 0, vendor release 6400)
Release Date: 16 March 2001
        If the server is older than 6-12 months, or if your card is
        newer than the above date, look for a newer version before
        reporting problems.  (See http://www.XFree86.Org/FAQ)
Operating System: Linux 2.4.1-20mdksmp i686 [ELF]
Module Loader present
 
 
 
rpm -qa | grep XFree
XFree86-75dpi-fonts-4.0.3-7mdk
XFree86-server-4.0.3-7mdk
XFree86-static-libs-4.0.3-7mdk
XFree86-xfs-4.0.3-7mdk
XFree86-Xvfb-4.0.3-7mdk
XFree86-libs-4.0.3-7mdk
XFree86-4.0.3-7mdk
XFree86-100dpi-fonts-4.0.3-7mdk
XFree86-devel-4.0.3-7mdk

je peux voir ton fichier /etc/X11/XF86Config-4 ?

ati rulezzzzzzzzzzzzzz

# File generated by XFdrake.
 
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
 
Section "Files"
 
    RgbPath "/usr/X11R6/lib/X11/rgb"
 
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
 
    FontPath   "unix/:-1"
 
EndSection
 
# **********************************************************************
# Server flags section.
# **********************************************************************
 
Section "ServerFlags"
 
    # Uncomment this to cause a core dump at the spot where a signal is
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    #NoTrapSignals
 
    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    #DontZap
 
    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    #DontZoom
 
    # This  allows  the  server  to start up even if the
    # mouse device can't be opened/initialised.
    AllowMouseOpenFail
 
EndSection
 
# **********************************************************************
# Input devices
# **********************************************************************
 
# **********************************************************************
# Keyboard section
# **********************************************************************
 
Section "InputDevice"
 
    Identifier "Keyboard1"
    Driver      "Keyboard"
    Option "AutoRepeat"  "250 30"
 
    Option "XkbRules" "xfree86"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "fr"
 
EndSection
 
# **********************************************************************
# Pointer section
# **********************************************************************
 
Section "InputDevice"
 
    Identifier  "Mouse1"
    Driver      "mouse"
    Option "Protocol"    "PS/2"
    Option "Device"      "/dev/psaux"
    Option "Emulate3Buttons"
    Option "Emulate3Timeout"    "50"
 
# ChordMiddle is an option for some 3-button Logitech mice
 
#    Option "ChordMiddle"
 
EndSection
 
 
 
Section "Module"
 
# This loads the DBE extension module.
 
    Load "dbe"
    Load        "glx"
 
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
 
    SubSection "extmod"
 #Option "omit xfree86-dga"
    EndSubSection
 
# This loads the Type1 and FreeType font modules
 
    Load "type1"
    Load "freetype"
EndSection
 
# **********************************************************************
# Monitor section
# **********************************************************************
 
# Any number of monitor sections may be present
 
Section "Monitor"
    Identifier "monitor1"
    VendorName "Unknown"
    ModelName  "Unknown"
 
 
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync  30-69
 
 
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50-120
 
 
EndSection
 
 
 
# **********************************************************************
# Graphics device section
# **********************************************************************
 
Section "Device"
    Identifier "Generic VGA"
    Driver     "vga"
EndSection
 
Section "Device"
    Identifier  "RIVA TNT2"
    VendorName  "Unknown"
    BoardName   "Unknown"
    Driver      "nvidia"
#    Driver      "nv"
#    VideoRam    4096
    # Clock lines
 
 
    # Uncomment following option if you see a big white block        
    # instead of the cursor!                                          
    #    Option      "sw_cursor"
 
    Option      "DPMS"
EndSection
 
 
 
# **********************************************************************
# Screen sections
# **********************************************************************
 
 
Section "Screen"
    Identifier "screen1"
    Device      "RIVA TNT2"
    Monitor     "monitor1"
    DefaultColorDepth 16
    Subsection "Display"
        Depth       8
        Modes       "1024x768" "800x600" "640x400"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection
 
 
Section "ServerLayout"
    Identifier "layout1"
    Screen     "screen1"
 
    InputDevice "Mouse1" "CorePointer"
 
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection

je crois que j'ai compris d'où venait le pb, mais comme le rapport de log était incomplet je n'ai pas tout de suite tilté.
je pense que c'est un pb de config ecran du à l'implémentation merdique de ddc sur les drivers nvidia.
il faut que tu désactive ddc.
c'est expliqué ici -> http://perso.wanadoo.fr/linux_wiza [...] ia.html#pb

j'ai rajoute Option "NoDDC" "true" et ca ne marche toujours pas

fais voir le fichier de log de XFree.
/var/log/XFree86.0.log

le voila :  
 
 
 
XFree86 Version 4.0.3 / X Window System
(protocol Version 11, revision 0, vendor release 6400)
Release Date: 16 March 2001
 If the server is older than 6-12 months, or if your card is
 newer than the above date, look for a newer version before
 reporting problems.  (See http://www.XFree86.Org/FAQ)
Operating System: Linux 2.4.1-20mdksmp i686 [ELF]  
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Sep 11 13:23:04 2001
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (??) unknown.
(==) ServerLayout "layout1"
(**) |-->Screen "screen1" (0)
(**) |   |-->Monitor "monitor1"
(**) |   |-->Device "RIVA TNT2"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "250 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "fr"
(**) XKB: layout: "fr"
(**) FontPath set to "unix/:-1"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail"
(--) using VT number 7
 
(WW) Open APM failed
(II) Module ABI versions:
 XFree86 ANSI C Emulation: 0.1
 XFree86 Video Driver: 0.3
 XFree86 XInput driver : 0.1
 XFree86 Server Extension : 0.1
 XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
 compiled for 4.0.3, module version = 1.0.0
 Module class: XFree86 Font Renderer
 ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
 compiled for 4.0.3, module version = 0.1.0
 ABI class: XFree86 Video Driver, version 0.3
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0305 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,8305 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1106,0686 card 1106,0000 rev 40 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:07:4: chip 1106,3057 card 1106,3057 rev 40 class 06,80,00 hdr 00
(II) PCI: 00:0a:0: chip 1102,0002 card 1102,0020 rev 04 class 04,01,00 hdr 80
(II) PCI: 00:0a:1: chip 1102,7002 card 1102,0020 rev 01 class 09,80,00 hdr 80
(II) PCI: 00:0c:0: chip 10ec,8029 card 10ec,8029 rev 00 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0029 card 14af,5820 rev 15 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
 compiled for 4.0.3, module version = 0.1.0
 ABI class: XFree86 Video Driver, version 0.3
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x00 (VGA_EN is cleared)
(II) Bus 0 I/O range:
 [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
 [0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
 [0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set)
(II) Bus 1 I/O range:
(II) Bus 1 non-prefetchable memory range:
 [0] -1 0xda000000 - 0xdbffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
 [0] -1 0xd8000000 - 0xd9ffffff (0x2000000) MX[B]
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x00 (VGA_EN is cleared)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(1:0:0) NVidia Riva Ultra TNT2 rev 21, Mem @ 0xda000000/24, 0xd8000000/25
(II) Addressable bus resource ranges are
 [0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
 [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
 [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
 [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
 [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [5] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
(II) Active PCI resource ranges:
 [0] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
 [1] -1 0xd8000000 - 0xd9ffffff (0x2000000) MX[B](B)
 [2] -1 0xda000000 - 0xdaffffff (0x1000000) MX[B](B)
 [3] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
 [4] -1 0x0000e000 - 0x0000e007 (0x8) IX[B]
 [5] -1 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
 [6] -1 0x0000d000 - 0x0000d00f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
 [0] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
 [1] -1 0xd8000000 - 0xd9ffffff (0x2000000) MX[B](B)
 [2] -1 0xda000000 - 0xdaffffff (0x1000000) MX[B](B)
 [3] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
 [4] -1 0x0000e000 - 0x0000e007 (0x8) IX[B]
 [5] -1 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
 [6] -1 0x0000d000 - 0x0000d00f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
 [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
 [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
 [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [5] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
(II) All system resource ranges:
 [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
 [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
 [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [5] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
 [6] -1 0xd8000000 - 0xd9ffffff (0x2000000) MX[B](B)
 [7] -1 0xda000000 - 0xdaffffff (0x1000000) MX[B](B)
 [8] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
 [9] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
 [10] -1 0x0000e000 - 0x0000e007 (0x8) IX[B]
 [11] -1 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
 [12] -1 0x0000d000 - 0x0000d00f (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
 compiled for 4.0.3, module version = 1.0.0
 Module class: XFree86 Server Extension
 ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
 compiled for 4.0.2, module version = 1.0.1512
 Module class: XFree86 Server Extension
 ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
 compiled for 4.0.3, module version = 1.0.0
 Module class: XFree86 Server Extension
 ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
 compiled for 4.0.3, module version = 1.0.0
 Module class: XFree86 Font Renderer
 ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
 compiled for 4.0.3, module version = 1.1.9
 Module class: XFree86 Font Renderer
 ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font FreeType
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
 compiled for 4.0.2, module version = 1.0.1512
 Module class: XFree86 Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
 compiled for 4.0.3, module version = 1.0.0
 Module class: XFree86 XInput Driver
 ABI class: XFree86 XInput driver, version 0.1
(II) NVIDIA: NVIDIA driver for: RIVA TNT, RIVA TNT2, RIVA TNT2 (Ultra),
 RIVA TNT2 (Vanta), RIVA TNT2 (M64), RIVA TNT2, RIVA TNT2,
 RIVA TNT2 (Integrated), GeForce 256, GeForce DDR, Quadro,
 GeForce2 MX, GeForce2 MX DDR, GeForce2 Go, GeForce2 MXR,
 GeForce2 Pro, GeForce2 GTS, GeForce2 Ultra, Quadro2 Pro, GeForce3,
 Quadro DCC
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset RIVA TNT2 (Ultra) found
(II) resource ranges after xf86ClaimFixedResources() call:
 [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
 [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
 [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [5] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
 [6] -1 0xd8000000 - 0xd9ffffff (0x2000000) MX[B](B)
 [7] -1 0xda000000 - 0xdaffffff (0x1000000) MX[B](B)
 [8] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
 [9] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
 [10] -1 0x0000e000 - 0x0000e007 (0x8) IX[B]
 [11] -1 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
 [12] -1 0x0000d000 - 0x0000d00f (0x10) IX[B]
(II) resource ranges after probing:
 [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
 [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
 [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [5] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
 [6] -1 0xd8000000 - 0xd9ffffff (0x2000000) MX[B](B)
 [7] -1 0xda000000 - 0xdaffffff (0x1000000) MX[B](B)
 [8] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
 [9] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
 [10] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
 [11] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
 [12] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
 [13] -1 0x0000e000 - 0x0000e007 (0x8) IX[B]
 [14] -1 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
 [15] -1 0x0000d000 - 0x0000d00f (0x10) IX[B]
 [16] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
 [17] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
 compiled for 4.0.3, module version = 0.1.0
 ABI class: XFree86 Video Driver, version 0.3
(**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16
(==) NVIDIA(0): RGB weight 565
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoDDC" "true"
(**) NVIDIA(0): Ignoring EDIDs
(--) NVIDIA(0): Linear framebuffer at 0xD8000000
(--) NVIDIA(0): MMIO registers at 0xDA000000
(EE) NVIDIA(0): Failed to initialize the NVdriver kernel module!
(EE) NVIDIA(0):  *** Aborting ***
(II) UnloadModule: "nvidia"
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(EE) Screen(s) found, but none have a usable configuration.
 
Fatal server error:
no screens found
 
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.

que donne :
> modprobe -l | grep NV
> modprobe NVdriver

modprobe -l | grep NV renvoie  
/lib/modules/2.4.8/kernel/drivers/video/NVdriver
 
et modprobe NVdriver  ne donne rien

grrrrrrrrrr
je vois pas
 
/lib/modules/2.4.8/kernel/drivers/video/NVdriver
 
2.4.8 ? tu as compilé ton propre kernel ? es tu sûr de tes options de compilation ?
 
 
bon on va faire une réinstalle en forcing :
> rpm --rebuild NVIDIA_kernel-1.0-1512.src.rpm
> rpm --rebuild NVIDIA_GLX-1.0-1512.src.rpm
> rpm -Uvh --force /usr/src/RPM/RPMS/i686/NVIDIA_kernel-1.0-1512.i686.rpm
> rpm -Uvh --force /usr/src/RPM/RPMS/i686/NVIDIA_GLX-1.0-1512.i686.rpm

merci en tout cas pour ton aide
 
j'ai en effet compile mon propre noyau et je crois ne pas m'etre trompe dans les options
 
j'essaie de forcer et je te dis ca

ca y est ca marche !
 
en fait, il faut mettre dans le bios "pnp os" no et "assign irq to vga" enabled
 
merci quand meme pour ton aide Dark_Schneider !

ca fait tellement longtemps que je dis de mettre PnP OS = No que je n'y ai pas pensé.

j'avais un peu oublie a cause de windows 2000...