kernel panic au boot quand j'enleve le lecteur CD

kernel panic au boot quand j'enleve le lecteur CD - Linux et OS Alternatifs

Marsh Posté le 20-12-2005 à 10:09:18    

Salut
 
Je suis parti d'une knoppix 4.0.2 que j'ai installée sur le HD, donc kernel 2.6.12, avec Grub : Apres install, j'ai fait pas mal de réglages, et plein de reboot : tout a parfaitement fonctionné.
 
LA dernière étape, pour mettre la machine sur son poste final, j'ai voulu retirer le lecteur CD/DVD (ide), dont elle n'avait pas besoin (le HD est en SATA).
 
Hors, dès que je le retire, la machine me fait un kernel panic : j'ai bien googlé à mort sur le sujet, mais j'ai pas trouvé de solution qui focntionne chez moi : une idée ?
 

Code :
  1. blablabla...
  2. e1000: eth0: e1000_probe: Intel PRO/1000 network Connection
  3. FATAL : Module sd_mod not found.
  4. umount: devfs: not mounted
  5. pivot_root: No such fil or directory
  6. /sbin/init: 432: cannot open /dev/console: No such file
  7. Kernel panic - not syncing: Attempted to kill init!

(--> tapé le texte à la main, risque d'erreurs, mais minimes...)
 
Pour comparer, j'ai rebooté avec le CDROM branché, et ca a booté bien sur, mais je n'ai pas eu le temps de relever tous les messages : je me rappelle juste que j'ai toujours l'erreur "FATAL sd_mod not found", mais par la suite, impossible de savoir ce qui passe ou pas, et en tous cas, l'ordinateur bloque :  
 
Auriez-vous une idée pour moi ?
 
Merci d'avance
 

Reply

Marsh Posté le 20-12-2005 à 10:09:18   

Reply

Marsh Posté le 20-12-2005 à 10:14:07    

dmesg pour visualier tout le blabla du boot.


---------------
BiBi Max
Reply

Marsh Posté le 20-12-2005 à 10:29:59    

bah oui mais justement, tout n'apparait pas avec le dmesg : jte le donne quand meme, si tu peux y voir + clair que moi ...

Code :
  1. Linux version 2.6.12 (root@Knoppix) (gcc-Version 3.3.6 (Debian 1:3.3.6-7)) #2 SMP Tue Aug 9 23:20:52 CEST 2005
  2. BIOS-provided physical RAM map:
  3. BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
  4. BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
  5. BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  6. BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
  7. BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
  8. BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
  9. BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
  10. BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
  11. 126MB HIGHMEM available.
  12. 896MB LOWMEM available.
  13. found SMP MP-table at 000f5bd0
  14. On node 0 totalpages: 261856
  15.   DMA zone: 4096 pages, LIFO batch:1
  16.   Normal zone: 225280 pages, LIFO batch:31
  17.   HighMem zone: 32480 pages, LIFO batch:15
  18. DMI 2.3 present.
  19. ACPI: RSDP (v000 IntelR                                ) @ 0x000f7c60
  20. ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fee3040
  21. ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fee30c0
  22. ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fee71c0
  23. ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
  24. ACPI: PM-Timer IO Port: 0x408
  25. ACPI: Local APIC address 0xfee00000
  26. ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  27. Processor #0 15:4 APIC version 20
  28. ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
  29. Processor #6 15:4 APIC version 20
  30. ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
  31. Processor #1 15:4 APIC version 20
  32. ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
  33. Processor #7 15:4 APIC version 20
  34. ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  35. ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  36. ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
  37. ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
  38. ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
  39. IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
  40. ACPI: IOAPIC (id[0x05] address[0xfec10000] gsi_base[24])
  41. IOAPIC[1]: apic_id 5, version 32, address 0xfec10000, GSI 24-47
  42. ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  43. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  44. ACPI: IRQ0 used by override.
  45. ACPI: IRQ2 used by override.
  46. ACPI: IRQ9 used by override.
  47. Enabling APIC mode:  Flat.  Using 2 I/O APICs
  48. Using ACPI (MADT) for SMP configuration information
  49. Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:bed00000)
  50. Built 1 zonelists
  51. Kernel command line: root=/dev/sda2 ro ramdisk_size=100000 lang=us apm=power-off nomce vga=791
  52. mapped APIC to ffffd000 (fee00000)
  53. mapped IOAPIC to ffffc000 (fec00000)
  54. mapped IOAPIC to ffffb000 (fec10000)
  55. Initializing CPU#0
  56. PID hash table entries: 4096 (order: 12, 65536 bytes)
  57. Detected 2994.366 MHz processor.
  58. Using pmtmr for high-res timesource
  59. Console: colour dummy device 80x25
  60. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  61. Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  62. Memory: 1028376k/1047424k available (1882k kernel code, 18120k reserved, 999k data, 296k init, 129920k highmem)
  63. Checking if this processor honours the WP bit even in supervisor mode... Ok.
  64. Calibrating delay loop... 5931.00 BogoMIPS (lpj=2965504)
  65. Security Framework v1.0.0 initialized
  66. SELinux:  Disabled at boot.
  67. Mount-cache hash table entries: 512
  68. CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
  69. CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
  70. monitor/mwait feature present.
  71. using mwait in idle threads.
  72. CPU: Trace cache: 12K uops, L1 D cache: 16K
  73. CPU: L2 cache: 2048K
  74. CPU: Physical Processor ID: 0
  75. CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000641d 00000000 00000000
  76. Enabling fast FPU save and restore... done.
  77. Enabling unmasked SIMD FPU exception support... done.
  78. Checking 'hlt' instruction... OK.
  79. Checking for popad bug... OK.
  80. CPU0: Intel(R) Xeon(TM) CPU 3.00GHz stepping 03
  81. Booting processor 1/1 eip 3000
  82. Initializing CPU#1
  83. Calibrating delay loop... 5980.16 BogoMIPS (lpj=2990080)
  84. CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
  85. CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
  86. monitor/mwait feature present.
  87. CPU: Trace cache: 12K uops, L1 D cache: 16K
  88. CPU: L2 cache: 2048K
  89. CPU: Physical Processor ID: 0
  90. CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000641d 00000000 00000000
  91. CPU1: Intel(R) Xeon(TM) CPU 3.00GHz stepping 03
  92. Booting processor 2/6 eip 3000
  93. Initializing CPU#2
  94. Calibrating delay loop... 5980.16 BogoMIPS (lpj=2990080)
  95. CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
  96. CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
  97. monitor/mwait feature present.
  98. CPU: Trace cache: 12K uops, L1 D cache: 16K
  99. CPU: L2 cache: 2048K
  100. CPU: Physical Processor ID: 3
  101. CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000641d 00000000 00000000
  102. CPU2: Intel(R) Xeon(TM) CPU 3.00GHz stepping 03
  103. Booting processor 3/7 eip 3000
  104. Initializing CPU#3
  105. Calibrating delay loop... 5980.16 BogoMIPS (lpj=2990080)
  106. CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
  107. CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
  108. monitor/mwait feature present.
  109. CPU: Trace cache: 12K uops, L1 D cache: 16K
  110. CPU: L2 cache: 2048K
  111. CPU: Physical Processor ID: 3
  112. CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000641d 00000000 00000000
  113. CPU3: Intel(R) Xeon(TM) CPU 3.00GHz stepping 03
  114. Total of 4 processors activated (23871.48 BogoMIPS).
  115. ENABLING IO-APIC IRQs
  116. ..TIMER: vector=0x31 pin1=2 pin2=-1
  117. checking TSC synchronization across 4 CPUs: passed.
  118. Brought up 4 CPUs
  119. CPU0 attaching sched-domain:
  120. domain 0: span 0000000f
  121.   groups: 00000001 00000002 00000004 00000008
  122. CPU1 attaching sched-domain:
  123. domain 0: span 0000000f
  124.   groups: 00000002 00000004 00000008 00000001
  125. CPU2 attaching sched-domain:
  126. domain 0: span 0000000f
  127.   groups: 00000004 00000008 00000001 00000002
  128. CPU3 attaching sched-domain:
  129. domain 0: span 0000000f
  130.   groups: 00000008 00000001 00000002 00000004
  131. checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
  132. Freeing initrd memory: 4582k freed
  133. NET: Registered protocol family 16
  134. EISA bus registered
  135. PCI: PCI BIOS revision 2.10 entry at 0xf1d30, last bus=4
  136. PCI: Using configuration type 1
  137. mtrr: v2.0 (20020519)
  138. ACPI: Subsystem revision 20050309
  139. ACPI: Interpreter enabled
  140. ACPI: Using IOAPIC for interrupt routing
  141. ACPI: PCI Root Bridge [PCI0] (0000:00)
  142. PCI: Probing PCI hardware (bus 00)
  143. PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
  144. Boot video device is 0000:01:00.0
  145. PCI: Transparent bridge - 0000:00:1e.0
  146. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  147. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
  148. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HRB_._PRT]
  149. ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11 12 14 15)
  150. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
  151. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
  152. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15)
  153. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 9 10 11 12 14 15)
  154. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
  155. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
  156. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
  157. Linux Plug and Play Support v0.97 (c) Adam Belay
  158. pnp: PnP ACPI init
  159. pnp: PnP ACPI: found 16 devices
  160. PnPBIOS: Disabled by ACPI PNP
  161. SCSI subsystem initialized
  162. PCI: Using ACPI for IRQ routing
  163. PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
  164. pnp: 00:0c: ioport range 0x400-0x4bf could not be reserved
  165. audit: initializing netlink socket (disabled)
  166. audit(1135072955.834:0): initialized
  167. highmem bounce pool size: 64 pages
  168. Total HugeTLB memory allocated, 0
  169. VFS: Disk quotas dquot_6.5.1
  170. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  171. Initializing Cryptographic API
  172. vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, using 3072k, total 131072k
  173. vesafb: mode is 1024x768x16, linelength=2048, pages=1
  174. vesafb: protected mode interface info at c000:e330
  175. vesafb: scrolling: redraw
  176. vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
  177. Console: switching to colour frame buffer device 128x48
  178. fb0: VESA VGA frame buffer device
  179. isapnp: Scanning for PnP cards...
  180. isapnp: No Plug & Play device found
  181. PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  182. serio: i8042 AUX port at 0x60,0x64 irq 12
  183. serio: i8042 KBD port at 0x60,0x64 irq 1
  184. io scheduler noop registered
  185. io scheduler anticipatory registered
  186. io scheduler deadline registered
  187. io scheduler cfq registered
  188. Floppy drive(s): fd0 is 1.44M
  189. FDC 0 is a post-1991 82077
  190. RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
  191. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
  192. ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
  193. Probing IDE interface ide0...
  194. hda: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive
  195. ide1: I/O resource 0x170-0x177 not free.
  196. ide1: ports already in use, skipping probe
  197. Probing IDE interface ide2...
  198. Probing IDE interface ide3...
  199. Probing IDE interface ide4...
  200. Probing IDE interface ide5...
  201. ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
  202. hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
  203. Uniform CD-ROM driver Revision: 3.20
  204. libata version 1.11 loaded.
  205. ata_piix version 1.03
  206. ata_piix: combined mode detected
  207. ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
  208. ata: 0x1f0 IDE port busy
  209. PCI: Setting latency timer of device 0000:00:1f.2 to 64
  210. ata1: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15
  211. ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4673 85:7c69 86:3e01 87:4663 88:407f
  212. ata1: dev 0 ATA, max UDMA/133, 320173056 sectors: lba48
  213. ata1: dev 0 configured for UDMA/133
  214. scsi0 : ata_piix
  215.   Vendor: ATA       Model: Maxtor 6L160M0    Rev: BANC
  216.   Type:   Direct-Access                      ANSI SCSI revision: 05
  217. sata_promise version 1.01
  218. ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 23 (level, low) -> IRQ 23
  219. ata2: SATA max UDMA/133 cmd 0xF8802200 ctl 0xF8802238 bmdma 0x0 irq 23
  220. ata3: SATA max UDMA/133 cmd 0xF8802280 ctl 0xF88022B8 bmdma 0x0 irq 23
  221. ata4: SATA max UDMA/133 cmd 0xF8802300 ctl 0xF8802338 bmdma 0x0 irq 23
  222. ata5: SATA max UDMA/133 cmd 0xF8802380 ctl 0xF88023B8 bmdma 0x0 irq 23
  223. ata2: no device found (phy stat 00000000)
  224. scsi1 : sata_promise
  225. ata3: no device found (phy stat 00000000)
  226. scsi2 : sata_promise
  227. ata4: no device found (phy stat 00000000)
  228. scsi3 : sata_promise
  229. ata5: no device found (phy stat 00000000)
  230. scsi4 : sata_promise
  231. SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
  232. SCSI device sda: drive cache: write back
  233. SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
  234. SCSI device sda: drive cache: write back
  235. sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
  236. Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
  237. mice: PS/2 mouse device common for all mice
  238. EISA: Probing bus 0 at eisa.0
  239. EISA: Detected 0 cards.
  240. NET: Registered protocol family 2
  241. IP: routing cache hash table of 4096 buckets, 64Kbytes
  242. TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
  243. TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  244. TCP: Hash tables configured (established 131072 bind 65536)
  245. NET: Registered protocol family 1
  246. NET: Registered protocol family 15
  247. Starting balanced_irq
  248. ACPI wakeup devices:
  249. PCI0 CSAD HUB0  HRB UAR1 UAR2 PS2M PS2K USB0 USB1 USBE MODM
  250. ACPI: (supports S0 S1 S3 S4 S5)
  251. RAMDISK: Compressed image found at block 0
  252. VFS: Mounted root (ext2 filesystem).
  253. Freeing unused kernel memory: 296k freed
  254. usbcore: registered new driver usbfs
  255. usbcore: registered new driver hub
  256. USB Universal Host Controller Interface driver v2.2
  257. ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
  258. PCI: Setting latency timer of device 0000:00:1d.0 to 64
  259. uhci_hcd 0000:00:1d.0: Intel Corporation 6300ESB USB Universal Host Controller
  260. uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
  261. uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000c400
  262. hub 1-0:1.0: USB hub found
  263. hub 1-0:1.0: 2 ports detected
  264. ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
  265. PCI: Setting latency timer of device 0000:00:1d.1 to 64
  266. uhci_hcd 0000:00:1d.1: Intel Corporation 6300ESB USB Universal Host Controller
  267. input: AT Translated Set 2 keyboard on isa0060/serio0
  268. uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
  269. uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c000
  270. hub 2-0:1.0: USB hub found
  271. hub 2-0:1.0: 2 ports detected
  272. ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
  273. Initializing USB Mass Storage driver...
  274. usbcore: registered new driver usb-storage
  275. USB Mass Storage support registered.
  276. ieee1394: Initialized config rom entry `ip1394'
  277. ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
  278. ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 20 (level, low) -> IRQ 20
  279. ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[fb125000-fb1257ff]  Max Packet=[2048]
  280. sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
  281. cloop: Initializing cloop v2.02
  282. cloop: loaded (max 8 devices)
  283. Real Time Clock Driver v1.12
  284. ACPI: Power Button (FF) [PWRF]
  285. Linux Kernel Card Services
  286.   options:  [pci] [cardbus] [pm]
  287. usbcore: registered new driver hiddev
  288. usbcore: registered new driver usbhid
  289. drivers/usb/input/hid-core.c: v2.01:USB HID core driver
  290. ts: Compaq touchscreen protocol output
  291. Serial: 8250/16550 driver $Revision: 1.90 $ 14 ports, IRQ sharing disabled
  292. ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  293. ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  294. parport: PnPBIOS parport detected.
  295. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
  296. input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
  297. ichxrom: ichxrom_init_one(): Unable to register resource 0xffb00000-0xffffffff - kernel bug?
  298. CFI: Found no ichxrom @fff00000 device at location zero
  299. input: AT Translated Set 2 keyboard on isa0060/serio0
  300. JEDEC: Found no ichxrom @fff00000 device at location zero
  301. CFI: Found no ichxrom @fff00000 device at location zero
  302. JEDEC: Found no ichxrom @fff00000 device at location zero
  303. CFI: Found no ichxrom @fff00000 device at location zero
  304. Found: PMC Pm49FL004
  305. ichxrom @fff00000: Found 1 x8 devices at 0x0 in 8-bit bank
  306. ichxrom @fff00000: Found an alias at 0x80000 for the chip at 0x0
  307. number of JEDEC chips: 1
  308. cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
  309. CFI: Found no ichxrom @fff80000 device at location zero
  310. JEDEC: Found no ichxrom @fff80000 device at location zero
  311. CFI: Found no ichxrom @fff80000 device at location zero
  312. JEDEC: Found no ichxrom @fff80000 device at location zero
  313. CFI: Found no ichxrom @fff80000 device at location zero
  314. Found: PMC Pm49FL004
  315. ichxrom @fff80000: Found 1 x8 devices at 0x0 in 8-bit bank
  316. number of JEDEC chips: 1
  317. cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
  318. hw_random hardware driver 1.0.0 loaded
  319. Linux agpgart interface v0.101 (c) Dave Jones
  320. agpgart: Detected an Intel i875 Chipset.
  321. agpgart: AGP aperture is 128M @ 0xe8000000
  322. Intel(R) PRO/1000 Network Driver - version 6.0.54-k2
  323. Copyright (c) 1999-2004 Intel Corporation.
  324. ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 18 (level, low) -> IRQ 18
  325. PCI: Setting latency timer of device 0000:02:01.0 to 64
  326. e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
  327. EXT3-fs: mounted filesystem with ordered data mode.
  328. kjournald starting.  Commit interval 5 seconds
  329. ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d800003afb53]
  330. Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!
  331. EXT3 FS on sda2, internal journal
  332. eth1394: $Rev: 1247 $ Ben Collins <bcollins@debian.org>
  333. eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
  334. Adding 987956k swap on /dev/sda1.  Priority:-1 extents:1
  335. EXT3 FS on sda2, internal journal
  336. kjournald starting.  Commit interval 5 seconds
  337. EXT3 FS on sda3, internal journal
  338. EXT3-fs: mounted filesystem with ordered data mode.
  339. kjournald starting.  Commit interval 5 seconds
  340. EXT3 FS on sda5, internal journal
  341. EXT3-fs: mounted filesystem with ordered data mode.
  342. Registering unionfs 20050921-1517
  343. NET: Registered protocol family 17
  344. Intel 810 + AC97 Audio, version 1.01, 22:38:37 Aug  9 2005
  345. ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
  346. PCI: Setting latency timer of device 0000:00:1f.5 to 64
  347. i810: Intel ICH4 found at IO 0xe400 and 0xe000, MEM 0xfb202000 and 0xfb203000, IRQ 17
  348. i810: Intel ICH4 mmio at 0xf927a000 and 0xf927c000
  349. i810_audio: Primary codec has ID 0
  350. i810_audio: Audio Controller supports 6 channels.
  351. i810_audio: Defaulting to base 2 channel mode.
  352. i810_audio: Resetting connection 0
  353. i810_audio: Connection 0 with codec id 0
  354. ac97_codec: AC97 Audio codec, id: ADS112 (Analog Devices AD1981)
  355. i810_audio: AC'97 codec 0 supports AMAP, total channels = 6
  356. pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  357. shpchp: shpc_init : shpc_cap_offset == 0
  358. shpchp: shpc_init : shpc_cap_offset == 0
  359. shpchp: shpc_init : shpc_cap_offset == 0
  360. shpchp: shpc_init : shpc_cap_offset == 0
  361. shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  362. ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
  363. PCI: Setting latency timer of device 0000:00:1d.7 to 64
  364. ehci_hcd 0000:00:1d.7: Intel Corporation 6300ESB USB2 Enhanced Host Controller
  365. ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
  366. ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb200000
  367. PCI: cache line size of 128 is not supported by device 0000:00:1d.7
  368. ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
  369. hub 3-0:1.0: USB hub found
  370. hub 3-0:1.0: 4 ports detected
  371. ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  372. ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  373. gameport: NS558 PnP Gameport is pnp00:0a/gameport0, io 0x201, speed 877kHz
  374. e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
  375. lp0: using parport0 (interrupt-driven).
  376. lp0: console ready
  377. NET: Registered protocol family 10
  378. Disabled Privacy Extensions on device c0381d00(lo)
  379. IPv6 over IPv4 tunneling driver
  380. eth0: no IPv6 routers present

Reply

Marsh Posté le 20-12-2005 à 11:40:50    

M'enfin la question qui me turlupine surtout c'est : pourquoi enlever le lecteur CD provoque un kernel panic ?
 
Qqun a une explication ?

Reply

Sujets relatifs:

Leave a Replay

Make sure you enter the(*)required information where indicate.HTML code is not allowed