bonjour,
que pensez vous de cette procédure pour configurer un modem ethernet?
 
Beware! To install this USB ADSL Modem Driver, Kernel source is needed.
 
Open tar ball file(USB_LINUX_ver1.1.3-CT.tar.gz) in where you prefered.
 Ex, ?/root/tar zxvf USB_LINUX_ver1.1.3-CT.tar.gz?
 
1. Install generic driver
  change directory to ./driver.
  run install $PWD kernel source directory name
   ex, "cd driver; ./install $PWD linux-2.4.7-10"
  ps. kernel source directory name is case sensitive.
 
2.Install pppoa applet
  change directory to ./pppoa
  run PPP_INSTALL $PWD
   ex, "cd pppoa; ./PPP_INSTALL $PWD"
 
3.Install third party pppoe client sofware
  download suitable roaring-penguin PPPoE client(RPM package better) from
  "http://www.roaringpenguin.com/pppoe".
  install the PPPoE client software.  
  ex, "rpm -Uvh rp-pppoe-3.5-1.i386.rpm"
 
4.Usage
  a. RFC1483 Bridge Mode
    1. edit /etc/analog/adiusbadsl.conf and change VPI/VCI/
       Encapsulation=(1 or 2) you ISP provided.
       ps. usual Encapsulation of RFC1483 Bridge is 1.
    2. Un-Plug Modem and Re-Plug again.
    3. check ADIModem interface appearing by "ifconfig -a".
       ps. write down the modem's MAC address by the way.
    4. change directory to "/usr/ADI_USB/ADI_LINUX/".
    5. edit "ifcfgeth".  
       fill suitable data your ISP provided to this file.  
       ps. MACADDR=your modem's MAC address from "ifconfig -a" result.
           "BOOOTPROTO=dhcp" for dynamic address assignment or  
           "BOOTPROTO=" for static address assignment.
    6. run "./godhcp ADIModem" for dynamic IP-address assignment.
       run "./gostatic ADIModem aa.bb.cc.dd xxx.xxx.xxx.xxx" for  
       static IP-address assignment.
       ps. "aa.bb.cc.dd" is IP-address your ISP assigned for you.
           "xxx.xxx.xxx.xxx is Netmask you ISP recommended.
 
  b.RFC 1483 Route Mode
    1. edit /etc/analog/adiusbadsl.conf and change VPI/VCI/
       Encapsulation=(3 or 4) you ISP provided.
       ps. usual Encapsulation of RFC1483 Router is 3.
    2. Un-Plug Modem and Re-Plug again.
    3. check ADIModem interface appearing by "ifconfig -a".
       ps. write down the modem's MAC address by the way.
    4. change directory to "/usr/ADI_USB/ADI_LINUX/".
    5. edit "ifcfgeth".  
       fill suitable data your ISP provided to this file.  
       ps. MACADDR=your modem's MAC address from "ifconfig -a" result.
           "BOOOTPROTO=dhcp" for dynamic address assignment or  
    6. run "./godhcp ADIModem" for dynamic IP-address assignment.
       run "./gostatic ADIModem aa.bb.cc.dd xxx.xxx.xxx.xxx" for  
       static IP-address assignment.
       ps. "aa.bb.cc.dd" is IP-address your ISP assigned for you.
           "xxx.xxx.xxx.xxx is Netmask you ISP recommended.
 
  c.PPPoA Mode
    1. edit /etc/analog/adiusbadsl.conf and change VPI/VCI/
       Encapsulation=(5 or 6) you ISP provided.
       ps. usual Encapsulation of PPPoA is 6.
    2. Un-Plug Modem and Re-Plug again.
    3. change directory to "/usr/ADI_USB/ADI_PPPOA/PPP_CONF".
    4. edit "options", "pap-secrets", "chap-secrets".  
       fill suitable user-name and password your ISP provided to these  
       files and copy these files to "/etc/ppp/".  
       ps. user-name in "options" must be identical to user-name field in  
           "pap-secrets" and "chap-secrets".
    5. run ADI_PPP_Go.
    6. if "ppp0" appeared in "ifconfig" result, pppoa connected.  
 
  d.PPPoE Mode  
    1. edit /etc/analog/adiusbadsl.conf and change VPI/VCI/
       Encapsulation=(1 or 2) you ISP provided.
       ps. usual Encapsulation of PPPoE is 1.
    2. Un-Plug Modem and Re-Plug again.
    3. Be sure that Roaring Penguin PPPoE client have installed in you system.
    4. run adsl_setup to input your user-name ,password, and Ethernet interface        applied PPPoE service.
      ps. in our case you should input "ADIModem" for PPPoE Ethernet interface.
    5. if "ppp0" appeared in "ifconfig" result, pppoe connected.  
 
   

Tu fais un Howto pour quel modem

j'en pense que tout est déjà installé/préconfiguré sur Mandrake

comtrend ct-361

de chez 9 tel , pour debian ya pas de problème ca rulez avec un apt-get install pppoe

mais pour mandrake?

rien de tout ca, je pense que c'est installé par défaut le pppoe, demande à Mjules ou DarkSneider si il passe dans les parages

ouai je vais suivre ton conseil