Ma radeon 9700 pro ne veux pas fonctioner en 3d : Ca marche

Ma radeon 9700 pro ne veux pas fonctioner en 3d : Ca marche - Multimédia - Linux et OS Alternatifs

Marsh Posté le 05-05-2003 à 19:54:12    

bon voila , jai un xfree 4.3( de base celui de mdk 9.1 ) et quand je veux installer le drivers officiel ( avec le force comme decrit dans les tutoriaux ) :  
 
jai beaucoup d'erreur : il me met des quand load module fglrx et blablabla  
je voudrait bien vous poster lerreur mais maintenant quand je fais urpmi --allow-force fglrx-glc22-4.3.0-2.9.8.i586.rpm
il me dit tout est deja installe :(
 
ensuite jai pas trouver la ligne Device="Radeon" donc jai fait le fglrxconfig  
 
le modprobe fglrx , il me dit quil a jamais entendu parler de fglrx ( c'ant locate module si je me souviens bien )
 
je fait startx , jai un ecran noir :(
 
Possesseurs de r9700 pro et autres , AIDEZ MOI SVP !  
 
 
 
 
 
 
 
 :cry:  :cry:  :cry:  :cry:  :cry:


Message édité par piloud le 05-05-2003 à 22:28:14
Reply

Marsh Posté le 05-05-2003 à 19:54:12   

Reply

Marsh Posté le 05-05-2003 à 20:04:11    

T'as fait un backup de ton XF86Config-4 ? C'est pas grave, tu peux toujours le regénérer avec XFdrake en console.
 
La ligne Driver "radeon" est dans la section "Device"
 
J'ai une 8500, mais j'ai essayé les deux : les drivers DRI (que tu ne peux pas utiliser) et les drivers ATI.
 
Voilà mon fichier avant les drivers ATI :

Code :
  1. # File generated by XFdrake.
  3. # **********************************************************************
  4. # Refer to the XF86Config man page for details about the format of
  5. # this file.
  6. # **********************************************************************
  8. Section "Files"
  9.     # Multiple FontPath entries are allowed (they are concatenated together)
  10.     # By default, Mandrake 6.0 and later now use a font server independent of
  11.     # the X server to render fonts.
  12.     FontPath "unix/:-1"
  13. EndSection
  15. Section "ServerFlags"
  16.     #DontZap # disable <Crtl><Alt><BS> (server abort)
  17.     #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
  18.     AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work
  19. EndSection
  21. Section "Module"
  22.     Load "dbe" # Double-Buffering Extension
  23.     Load "v4l" # Video for Linux
  24.     Load "extmod"
  25.     Load "type1"
  26.     Load "freetype"
  27.     Load "glx" # 3D layer
  28. EndSection
  30. Section "InputDevice"
  31.     Identifier "Keyboard1"
  32.     Driver "Keyboard"
  33.     Option "XkbModel" "pc105"
  34.     Option "XkbLayout" "fr"
  35.     Option "XkbCompat" ""
  36.     Option "XkbOptions" ""
  37. EndSection
  39. Section "InputDevice"
  40.     Identifier "Mouse1"
  41.     Driver "mouse"
  42.     Option "Protocol" "IMPS/2"
  43.     Option "Device" "/dev/usbmouse"
  44.     Option "ZAxisMapping" "4 5"
  45. EndSection
  47. Section "Monitor"
  48.     Identifier "monitor1"
  49.     VendorName "Plug'n Play"
  50.     ModelName "Iiyama MA901U, VisionMaster Pro 452"
  51.     HorizSync 30.0-96.0
  52.     VertRefresh 50.0-180.0
  54.     # Sony Vaio C1(X,XS,VE,VN)?
  55.     # 1024x480 @ 85.6 Hz, 48 kHz hsync
  56.     ModeLine "1024x480"    65.00 1024 1032 1176 1344   480  488  494  563 -hsync -vsync
  57.    
  58.     # TV fullscreen mode or DVD fullscreen output.
  59.     # 768x576 @ 79 Hz, 50 kHz hsync
  60.     ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
  62.     # 768x576 @ 100 Hz, 61.6 kHz hsync
  63.     ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616
  64. EndSection
  66. Section "Device"
  67.     Identifier "device1"
  68.     VendorName "ATI"
  69.     BoardName "ATI Radeon 8500"
  70.     Driver "radeon"
  71.     Option "DPMS"
  72. EndSection
  74. Section "Screen"
  75.     Identifier "screen1"
  76.     Device "device1"
  77.     Monitor "monitor1"
  78.     DefaultColorDepth 24
  79.    
  80.     Subsection "Display"
  81.         Depth 8
  82.         Modes "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
  83.     EndSubsection
  84.    
  85.     Subsection "Display"
  86.         Depth 15
  87.         Modes "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
  88.     EndSubsection
  90.     Subsection "Display"
  91.         Depth 16
  92.         Modes "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
  93.     EndSubsection
  95.     Subsection "Display"
  96.         Depth 24
  97.         Modes "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
  98.     EndSubsection
  99. EndSection
  101. Section "ServerLayout"
  102.     Identifier "layout1"
  103.     InputDevice "Keyboard1" "CoreKeyboard"
  104.     InputDevice "Mouse1" "CorePointer"
  105.     Screen "screen1"
  106. EndSection


 
Après fglrxconfig :

Code :
  1. # File: XF86Config-4
  2. # File generated by fglrxconfig (C) ATI Research, a substitute for xf86config.
  4. # Note by ATI: the below copyright notice is there for servicing possibly
  5. # pending third party rights on the file format and the instance of this file.
  6. #
  7. # Copyright (c) 1999 by The XFree86 Project, Inc.
  8. #
  9. # Permission is hereby granted, free of charge, to any person obtaining a
  10. # copy of this software and associated documentation files (the "Software" ),
  11. # to deal in the Software without restriction, including without limitation
  12. # the rights to use, copy, modify, merge, publish, distribute, sublicense,
  13. # and/or sell copies of the Software, and to permit persons to whom the
  14. # Software is furnished to do so, subject to the following conditions:
  15. #
  16. # The above copyright notice and this permission notice shall be included in
  17. # all copies or substantial portions of the Software.
  18. #
  19. # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  20. # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  21. # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  22. # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  23. # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
  24. # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  25. # SOFTWARE.
  26. #
  27. # Except as contained in this notice, the name of the XFree86 Project shall
  28. # not be used in advertising or otherwise to promote the sale, use or other
  29. # dealings in this Software without prior written authorization from the
  30. # XFree86 Project.
  31. #
  33. # **********************************************************************
  34. # Refer to the XF86Config(4/5) man page for details about the format of
  35. # this file.
  36. # **********************************************************************
  38. # **********************************************************************
  39. # DRI Section
  40. # **********************************************************************
  41. Section "dri"
  42. # Access to OpenGL ICD is allowed for all users:
  43.     Mode 0666
  44. # Access to OpenGL ICD is restricted to a specific user group:
  45. #    Group 100    # users
  46. #    Mode 0660
  47. EndSection
  49. # **********************************************************************
  50. # Module section -- this  section  is used to specify
  51. # which dynamically loadable modules to load.
  52. # **********************************************************************
  53. #
  54. Section "Module"
  56. # This loads the DBE extension module.
  58.     Load        "dbe"   # Double buffer extension
  60. # This loads the miscellaneous extensions module, and disables
  61. # initialisation of the XFree86-DGA extension within that module.
  62.     SubSection  "extmod"
  63.       Option    "omit xfree86-dga"   # don't initialise the DGA extension
  64.     EndSubSection
  66. # This loads the Type1 and FreeType font modules
  67.     Load        "type1"
  68.     Load        "freetype"
  70. # This loads the GLX module
  71.     Load        "glx"   # libglx.a
  72.     Load        "dri"   # libdri.a
  74. EndSection
  76. # **********************************************************************
  77. # Files section.  This allows default font and rgb paths to be set
  78. # **********************************************************************
  80. Section "Files"
  82. # The location of the RGB database.  Note, this is the name of the
  83. # file minus the extension (like ".txt" or ".db" ).  There is normally
  84. # no need to change the default.
  86.     RgbPath "/usr/X11R6/lib/X11/rgb"
  88. # Multiple FontPath entries are allowed (which are concatenated together),
  89. # as well as specifying multiple comma-separated entries in one FontPath
  90. # command (or a combination of both methods)
  91. #
  92. # If you don't have a floating point coprocessor and emacs, Mosaic or other
  93. # programs take long to start up, try moving the Type1 and Speedo directory
  94. # to the end of this list (or comment them out).
  95. #
  97. #    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
  98.     FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
  99.     FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
  100.     FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
  101.     FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
  102.     FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
  103.     FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
  104.     FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
  106. # The module search path.  The default path is shown here.
  108. #    ModulePath "/usr/X11R6/lib/modules"
  110. EndSection
  112. # **********************************************************************
  113. # Server flags section.
  114. # **********************************************************************
  116. Section "ServerFlags"
  118. # Uncomment this to cause a core dump at the spot where a signal is
  119. # received.  This may leave the console in an unusable state, but may
  120. # provide a better stack trace in the core dump to aid in debugging
  122. #    Option "NoTrapSignals"
  124. # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
  125. # This allows clients to receive this key event.
  127. #    Option "DontZap"
  129. # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
  130. # sequences.  This allows clients to receive these key events.
  132. #    Option "Dont Zoom"
  134. # Uncomment this to disable tuning with the xvidtune client. With
  135. # it the client can still run and fetch card and monitor attributes,
  136. # but it will not be allowed to change them. If it tries it will
  137. # receive a protocol error.
  139. #    Option "DisableVidModeExtension"
  141. # Uncomment this to enable the use of a non-local xvidtune client.
  143. #    Option "AllowNonLocalXvidtune"
  145. # Uncomment this to disable dynamically modifying the input device
  146. # (mouse and keyboard) settings.
  148. #    Option "DisableModInDev"
  150. # Uncomment this to enable the use of a non-local client to
  151. # change the keyboard or mouse settings (currently only xset).
  153. #    Option "AllowNonLocalModInDev"
  155. EndSection
  157. # **********************************************************************
  158. # Input devices
  159. # **********************************************************************
  161. # **********************************************************************
  162. # Core keyboard's InputDevice section
  163. # **********************************************************************
  165. Section "InputDevice"
  167.     Identifier "Keyboard1"
  168.     Driver "Keyboard"
  169. # For most OSs the protocol can be omitted (it defaults to "Standard" ).
  170. # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
  171. # uncomment the following line.
  173. #    Option "Protocol"   "Xqueue"
  175.     Option "AutoRepeat" "500 30"
  177. # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
  178. #    Option "Xleds"      "1 2 3"
  180. #    Option "LeftAlt"    "Meta"
  181. #    Option "RightAlt"   "ModeShift"
  183. # To customise the XKB settings to suit your keyboard, modify the
  184. # lines below (which are the defaults).  For example, for a non-U.S.
  185. # keyboard, you will probably want to use:
  186. #    Option "XkbModel"   "pc102"
  187. # If you have a US Microsoft Natural keyboard, you can use:
  188. #    Option "XkbModel"   "microsoft"
  189. #
  190. # Then to change the language, change the Layout setting.
  191. # For example, a german layout can be obtained with:
  192. #    Option "XkbLayout"  "de"
  193. # or:
  194. #    Option "XkbLayout"  "de"
  195. #    Option "XkbVariant" "nodeadkeys"
  196. #
  197. # If you'd like to switch the positions of your capslock and
  198. # control keys, use:
  199. #    Option "XkbOptions" "ctrl:swapcaps"
  201. # These are the default XKB settings for XFree86
  202. #    Option "XkbRules"   "xfree86"
  203. #    Option "XkbModel"   "pc101"
  204. #    Option "XkbLayout"  "us"
  205. #    Option "XkbVariant" ""
  206. #    Option "XkbOptions" ""
  208. #    Option "XkbDisable"
  210.     Option "XkbRules" "xfree86"
  211.     Option "XkbModel" "pc105"
  212.     Option "XkbLayout" "fr"
  214. EndSection
  217. # **********************************************************************
  218. # Core Pointer's InputDevice section
  219. # **********************************************************************
  221. Section "InputDevice"
  223. # Identifier and driver
  225.     Identifier "Mouse1"
  226.     Driver "mouse"
  227.     Option "Protocol"   "ImPS/2"
  228.     Option "ZAxisMapping"   "4 5"
  229.     Option "Device"     "/dev/mouse"
  231. # When using XQUEUE, comment out the above two lines, and uncomment
  232. # the following line.
  234. #    Option "Protocol"   "Xqueue"
  236. # Baudrate and SampleRate are only for some Logitech mice. In
  237. # almost every case these lines should be omitted.
  239. #    Option "BaudRate"   "9600"
  240. #    Option "SampleRate" "150"
  242. # Emulate3Buttons is an option for 2-button Microsoft mice
  243. # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
  245. #    Option "Emulate3Buttons"
  246. #    Option "Emulate3Timeout"    "50"
  248. # ChordMiddle is an option for some 3-button Logitech mice
  250. #    Option "ChordMiddle"
  252. EndSection
  255. # **********************************************************************
  256. # Other input device sections
  257. # this is optional and is required only if you
  258. # are using extended input devices.  This is for example only.  Refer
  259. # to the XF86Config man page for a description of the options.
  260. # **********************************************************************
  261. #
  262. # Section "InputDevice"
  263. #    Identifier  "Mouse2"
  264. #    Driver      "mouse"
  265. #    Option      "Protocol"      "MouseMan"
  266. #    Option      "Device"        "/dev/mouse2"
  267. # EndSection
  268. #
  269. # Section "InputDevice"
  270. #    Identifier "spaceball"
  271. #    Driver     "magellan"
  272. #    Option     "Device"         "/dev/cua0"
  273. # EndSection
  274. #
  275. # Section "InputDevice"
  276. #    Identifier "spaceball2"
  277. #    Driver     "spaceorb"
  278. #    Option     "Device"         "/dev/cua0"
  279. # EndSection
  280. #
  281. # Section "InputDevice"
  282. #    Identifier "touchscreen0"
  283. #    Driver     "microtouch"
  284. #    Option     "Device"         "/dev/ttyS0"
  285. #    Option     "MinX"           "1412"
  286. #    Option     "MaxX"           "15184"
  287. #    Option     "MinY"           "15372"
  288. #    Option     "MaxY"           "1230"
  289. #    Option     "ScreenNumber"   "0"
  290. #    Option     "ReportingMode"  "Scaled"
  291. #    Option     "ButtonNumber"   "1"
  292. #    Option     "SendCoreEvents"
  293. # EndSection
  294. #
  295. # Section "InputDevice"
  296. #    Identifier "touchscreen1"
  297. #    Driver     "elo2300"
  298. #    Option     "Device"         "/dev/ttyS0"
  299. #    Option     "MinX"           "231"
  300. #    Option     "MaxX"           "3868"
  301. #    Option     "MinY"           "3858"
  302. #    Option     "MaxY"           "272"
  303. #    Option     "ScreenNumber"   "0"
  304. #    Option     "ReportingMode"  "Scaled"
  305. #    Option     "ButtonThreshold"    "17"
  306. #    Option     "ButtonNumber"   "1"
  307. #    Option     "SendCoreEvents"
  308. # EndSection
  310. # **********************************************************************
  311. # Monitor section
  312. # **********************************************************************
  314. # Any number of monitor sections may be present
  316. Section "Monitor"
  317.     Identifier  "Monitor0"
  318.     HorizSync   30-96
  319.     VertRefresh 50-180
  320.     Option "DPMS"
  322. # === mode lines based on GTF ===
  323. # VGA @ 100Hz
  324. # Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
  325. # SVGA @ 100Hz
  326. # Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
  327. # XVGA @ 100Hz
  328. # Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
  329. # 1152x864 @ 60Hz
  330. # Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
  331. # 1152x864 @ 85Hz
  332. # Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
  333. # 1152x864 @ 100Hz
  334. # Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
  335. # 1280x960 @ 75Hz
  336. # Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
  337. # 1280x960 @ 100Hz
  338. # Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
  339. # SXGA @ 100Hz
  340. # Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
  341. # 1600x1000 @ 60Hz
  342. # Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
  343. # 1600x1000 @ 75Hz
  344. # Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
  345. # 1600x1000 @ 85Hz
  346. # Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
  347. # 1600x1000 @ 100Hz
  348. # Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
  349. # 1600x1024 @ 60Hz
  350. # Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
  351. # 1600x1024 @ 75Hz
  352. # Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
  353. # 1600x1024 @ 76Hz
  354. # Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
  355. # 1600x1024 @ 85Hz
  356. # Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
  357. # 1920x1080 @ 60Hz
  358. # Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
  359. # 1920x1080 @ 75Hz
  360. # Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
  361. # 1920x1200 @ 60Hz
  362. # Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
  363. # 1920x1200 @ 75Hz
  364. # Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
  365. # 2048x1536 @ 60
  366. # Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
  367. # 2048x1536 @ 60
  368. # Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
  369. # 1400x1050 @ 60Hz M9 Laptop mode
  370. # ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
  371. # 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
  372. # Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
  373. # 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
  374. # Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync
  376. EndSection
  379. # **********************************************************************
  380. # Graphics device section
  381. # **********************************************************************
  383. # Any number of graphics device sections may be present
  385. # Standard VGA Device:
  387. Section "Device"
  388.     Identifier  "Standard VGA"
  389.     VendorName  "Unknown"
  390.     BoardName   "Unknown"
  392. # The chipset line is optional in most cases.  It can be used to override
  393. # the driver's chipset detection, and should not normally be specified.
  395. #    Chipset     "generic"
  397. # The Driver line must be present.  When using run-time loadable driver
  398. # modules, this line instructs the server to load the specified driver
  399. # module.  Even when not using loadable driver modules, this line
  400. # indicates which driver should interpret the information in this section.
  402.     Driver      "vga"
  403. # The BusID line is used to specify which of possibly multiple devices
  404. # this section is intended for.  When this line isn't present, a device
  405. # section can only match up with the primary video device.  For PCI
  406. # devices a line like the following could be used.  This line should not
  407. # normally be included unless there is more than one video device
  408. # installed.
  410. #    BusID       "PCI:0:10:0"
  412. #    VideoRam    256
  414. #    Clocks      25.2 28.3
  416. EndSection
  418. # === ATI device section ===
  420. Section "Device"
  421.     Identifier                          "ATI Graphics Adapter"
  422.     Driver                              "fglrx"
  423. # === disable PnP Monitor  ===
  424.     #Option                              "NoDDC"
  425. # === disable/enable XAA/DRI ===
  426.     Option "no_accel"                   "no"
  427.     Option "no_dri"                     "no"
  428. # === FireGL DDX driver module specific settings ===
  429. # === Screen Management ===
  430.     Option "DesktopSetup"               "0x00000000"
  431.     Option "MonitorLayout"              "AUTO, AUTO"
  432.     Option "IgnoreEDID"                 "off"
  433.     Option "HSync2"                     "unspecified"
  434.     Option "VRefresh2"                  "unspecified"
  435.     Option "ScreenOverlap"              "0"
  436.     Option "GammaCorrectionI"           "0x00000000"
  437.     Option "GammaCorrectionII"          "0x00000000"
  438. # === OpenGL specific profiles/settings ===
  439.     Option "Capabilities"               "0x00000000"
  440. # === Video Overlay for the Xv extension ===
  441.     Option "VideoOverlay"               "on"
  442. # === OpenGL Overlay ===
  443. # Note: When OpenGL Overlay is enabled, Video Overlay
  444. #       will be disabled automatically
  445.     Option "OpenGLOverlay"              "off"
  446. # === Misc Options ===
  447.     Option "UseFastTLS"                 "0"
  448.     Option "BlockSignalsOnLock"         "on"
  449.     BusID "PCI:1:0:0"    # vendor=1002, device=514c
  450.     Screen 0
  451. EndSection
  453. # **********************************************************************
  454. # Screen sections
  455. # **********************************************************************
  457. # Any number of screen sections may be present.  Each describes
  458. # the configuration of a single screen.  A single specific screen section
  459. # may be specified from the X server command line with the "-screen"
  460. # option.
  461. Section "Screen"
  462.     Identifier  "Screen0"
  463.     Device      "ATI Graphics Adapter"
  464.     Monitor     "Monitor0"
  465.     DefaultDepth 24
  466.     #Option "backingstore"
  468.     Subsection "Display"
  469.         Depth       24
  470.         Modes       "1400x1050" "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
  471.         ViewPort    0 0  # initial origin if mode is smaller than desktop
  472. #        Virtual     1280 1024
  473.     EndSubsection
  474. EndSection
  476. # **********************************************************************
  477. # ServerLayout sections.
  478. # **********************************************************************
  480. # Any number of ServerLayout sections may be present.  Each describes
  481. # the way multiple screens are organised.  A specific ServerLayout
  482. # section may be specified from the X server command line with the
  483. # "-layout" option.  In the absence of this, the first section is used.
  484. # When now ServerLayout section is present, the first Screen section
  485. # is used alone.
  487. Section "ServerLayout"
  489. # The Identifier line must be present
  490.     Identifier  "Server Layout"
  492. # Each Screen line specifies a Screen section name, and optionally
  493. # the relative position of other screens.  The four names after
  494. # primary screen name are the screens to the top, bottom, left and right
  495. # of the primary screen.
  497.     Screen "Screen0"
  499. # Each InputDevice line specifies an InputDevice section name and
  500. # optionally some options to specify the way the device is to be
  501. # used.  Those options include "CorePointer", "CoreKeyboard" and
  502. # "SendCoreEvents".
  504.     InputDevice "Mouse1" "CorePointer"
  505.     InputDevice "Keyboard1" "CoreKeyboard"
  507. EndSection
  509. ### EOF ###

Reply

Marsh Posté le 05-05-2003 à 20:06:17    

En fait, tu peux utiliser le fichier généré par XFdrake, et remplacer "Driver "radeon" par fglrx.
Par contre, tu dois rajouter :
 
 
Load        "dri"   (sous Load "glx" )
 
et
 
# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
   Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
#    Group 100    # users
#    Mode 0660
EndSection

Reply

Marsh Posté le 05-05-2003 à 20:11:28    

et le modprobe va marche ou c normal quil foire !?

Reply

Marsh Posté le 05-05-2003 à 20:13:14    

Ah zeb_ quesque que je ferait si t'etais pas la :)  
:jap: Tu est un DIEU de la mandrake  :jap:    
 
Les 3/4 de mes problemes c toi qui les resouds :) !  
 
ps :merci aux autres qui m'ont aider aussi !

Reply

Marsh Posté le 05-05-2003 à 20:43:34    

au moment du startx :  
 
fatal server error :  
cant load fglrx
 
je benit mes backups
 
comment je peux desinstaller et reinstaller les drivers
la si je fait :  
 
urpmi fglrx-glc22-4.3.0-2.9.8.i586.rpm
erreur de syntaxe dans le fichier de configuration à la ligne 2
erreur de syntaxe dans le fichier de configuration à la ligne 3
erreur de syntaxe dans le fichier de configuration à la ligne 4
erreur de syntaxe dans le fichier de configuration à la ligne 8
erreur de syntaxe dans le fichier de configuration à la ligne 9
erreur de syntaxe dans le fichier de configuration à la ligne 10
tout est déjà installé
 
jai reussit a desinstaller et voici le message derreur de linstalle :  
 

Code :
  1. installation de fglrx-glc22-4.3.0-2.9.8.i586.rpm
  3. Préparation...              ##################################################
  4.    1:fglrx-glc22            ##################################################
  5. *** Trying to install a precompiled kernel module.
  6. *** WARNING ***
  7. Tailored kernel module for fglrx not present in your system.
  8. You must go to /lib/modules/fglrx/build_mod subdir
  9. and execute './make.sh' to build a fully customed kernel module.
  10. Afterwards go to /lib/modules/fglrx and run './make_install.sh'
  11. in order to install the module into your kernel's module repository.
  12. (see readme.txt for more details.)
  14. As of now you can still run your XServer in 2D, but hardware acclerated
  15. OpenGL will not work and 2D graphics will lack performance.
  17. failed.
  18. *** Error: no kernel module build environment - please consult readme.
  19. Installed: qt3 (gcc 3.2) based control panel application
  20. ===
  21. ATI display drivers successfully installed
  22. please run 'fglrxconfig' now
  23. ===


Message édité par piloud le 05-05-2003 à 20:54:48
Reply

Marsh Posté le 05-05-2003 à 20:58:29    

et voila la suite :  
si je fait ce quil est marke :  
 
[root@localhost build_mod]# ./make.sh
ATI module generator V 2.0
==========================
kernel includes at /usr/src/linux/include not found or incomplete
file: /usr/src/linux/include/linux/version.h

Reply

Marsh Posté le 05-05-2003 à 21:01:22    

POur quoi ya que moi qui est toutes ces couilles :( :cry:  :cry:  :cry:

Reply

Marsh Posté le 05-05-2003 à 21:03:28    

il faut installer les sources de ton noyau  :D


---------------
Gitan des temps modernes
Reply

Marsh Posté le 05-05-2003 à 21:04:41    

urpmi kernel-headers
 
et au besoin :
urpmi kernel-source
urpmi glibc-devel
urpmi libMesaGLU1-devel


---------------
Celui qui pose une question est idiot 5 minutes. Celui qui n'en pose pas le reste toute sa vie. |  Membre du grand complot pharmaceutico-médico-scientifico-judéo-maçonnique.
Reply

Marsh Posté le 05-05-2003 à 21:04:41   

Reply

Marsh Posté le 05-05-2003 à 21:08:24    

Mjules a écrit :

urpmi kernel-headers
 
et au besoin :
urpmi kernel-source
urpmi glibc-devel
urpmi libMesaGLU1-devel



 
Merci !!!!!!
 
kernel-headers : tout deja installe ! (jespere que c normal)
 
kernel-source : downloading !

Reply

Marsh Posté le 05-05-2003 à 21:29:46    

c normale ?  
 
 

Code :
  1. Préparation...              ##################################################
  2.    1:fglrx-glc22            ##################################################
  3. *** Trying to install a precompiled kernel module.
  4. *** WARNING ***
  5. Tailored kernel module for fglrx not present in your system.
  6. You must go to /lib/modules/fglrx/build_mod subdir
  7. and execute './make.sh' to build a fully customed kernel module.
  8. Afterwards go to /lib/modules/fglrx and run './make_install.sh'
  9. in order to install the module into your kernel's module repository.
  10. (see readme.txt for more details.)
  12. As of now you can still run your XServer in 2D, but hardware acclerated
  13. OpenGL will not work and 2D graphics will lack performance.
  15. failed.
  16. *** Found kernel module build environment, generating kernel module now.
  17. ATI module generator V 2.0
  18. ==========================
  19. probing for VMA API version...
  20. cleaning...
  21. patching 'highmem.h'...
  22. patching 'drmP.h'...
  23. patching file drmP.h
  24. Hunk #1 FAILED at 255.
  25. Hunk #2 FAILED at 266.
  26. 2 out of 2 hunks FAILED -- saving rejects to file drmP.h.rej
  27. compiling 'agpgart_be.c'...
  28. compiling 'agp3.c'...
  29. compiling 'i7505-agp.c'...
  30. compiling 'firegl_public.c'...
  31. linking of fglrx kernel module...
  32. duplicating results into driver repository...
  33. done.
  34. ==============================
  35. - creating symlink
  36. - recreating module dependency list
  37. - trying a sample load of the kernel module
  38. Warning: loading /lib/modules/2.4.21-0.13mdk/kernel/drivers/char/drm/fglrx.o will taint the kernel: non-GPL license - Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY
  39.   See http://www.tux.org/lkml/#export-tainted for information about tainted modules
  40. Module fglrx loaded, with warnings
  41. done.
  42. Installed: qt3 (gcc 3.2) based control panel application
  43. ===
  44. ATI display drivers successfully installed
  45. please run 'fglrxconfig' now
  46. ===
  47. [root@localhost pilou]#

Reply

Marsh Posté le 05-05-2003 à 21:33:07    

la suite est ok (enfin je sais pas ):
 
 
 

Code :
  1. modprobe fglrx
  2. Warning: loading /lib/modules/2.4.21-0.13mdk/kernel/drivers/char/drm/fglrx.o will taint the kernel: non-GPL license - Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY
  3.   See http://www.tux.org/lkml/#export-tainted for information about tainted modules
  4. Module fglrx loaded, with warnings

Reply

Marsh Posté le 05-05-2003 à 21:37:34    

oui et oui
 
il te dit qu'il a bien compilé et bien installé, et quand tu lances la config, il t'explique qu'en chargeant un module propriétaire dans le noyau Linux (qui est libre) tu va le "teinter" . J'ai le même message avec nvidia.


---------------
Celui qui pose une question est idiot 5 minutes. Celui qui n'en pose pas le reste toute sa vie. |  Membre du grand complot pharmaceutico-médico-scientifico-judéo-maçonnique.
Reply

Marsh Posté le 05-05-2003 à 22:03:03    

cetait trop beau pour etre vrai , mais la je crois que je touche a la fin et que c juste un probleme de resolution !  
 
Bon voila les bug :  
 
(EE)fglrx : given depht(16) is not supported by fglrx driver
(EE)fglrx : print rismol failed ( pas sur jarrive pas a relire mes notes)
(EE)fglrx :R200 print failed
 
Screen found but none have usable configuration
 
Fatal server error : No screens found  
 
 
quesqui faut que je fasse ?    
 
Je suis sur un ecran plat supportant le 1280*1024 et je sais pas combien hertz je crois genre 60 a 85 ...  
Je met koi dans mon XF86Config-4 ?

Reply

Marsh Posté le 05-05-2003 à 22:08:19    

alors sur mon ecran ya marque :  
 
reso actuelle qui tourne tres bien  : 1024*768@75 hertz
optimal : 1280 * 1024 @ 60 hertz  
lol si ca tombe je suis a cote de la plaque et c pas ca le probleme ! :)

Reply

Marsh Posté le 05-05-2003 à 22:11:43    

le pb vient de l'écran : il n'arrive pas à trouver une config utilisable par ton écran et par ta CG (en particulier, les couleurs en 16 bits, elle a pas l'air d'aimer)
 
essaye de modifier XF86config--4 pour changer le depth


---------------
Celui qui pose une question est idiot 5 minutes. Celui qui n'en pose pas le reste toute sa vie. |  Membre du grand complot pharmaceutico-médico-scientifico-judéo-maçonnique.
Reply

Marsh Posté le 05-05-2003 à 22:12:56    

quesque je doit faire dedans pour que la resolution soit  supportee par fglrx :  
un 1280*1024 en 60 hertz  
ou la reso en dessous inf ou egale a 75 hertz acceptee par fglrx !  
 
merci !
 
 
 

Code :
  1. # File generated by XFdrake.
  3. # **********************************************************************
  4. # Refer to the XF86Config man page for details about the format of
  5. # this file.
  6. # **********************************************************************
  8. Section "Files"
  9.     # Multiple FontPath entries are allowed (they are concatenated together)
  10.     # By default, Mandrake 6.0 and later now use a font server independent of
  11.     # the X server to render fonts.
  12.     FontPath "unix/:-1"
  13. EndSection
  15. Section "ServerFlags"
  16.     #DontZap # disable <Crtl><Alt><BS> (server abort)
  17.     AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work
  18.     #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
  19. EndSection
  21. Section "Module"
  22.     Load "dbe" # Double-Buffering Extension
  23.     Load "v4l" # Video for Linux
  24.     Load "extmod"
  25.     Load "type1"
  26.     Load "freetype"
  27.     Load "glx" # 3D layer
  28.     Load "dri" # direct rendering
  29. EndSection
  31. Section "DRI"
  32.     Mode 0666
  33. EndSection
  35. Section "InputDevice"
  36.     Identifier "Keyboard1"
  37.     Driver "Keyboard"
  38.     Option "XkbModel" "pc105"
  39.     Option "XkbLayout" "us_intl"
  40.     Option "XkbCompat" ""
  41.     Option "XkbOptions" ""
  42. EndSection
  44. Section "InputDevice"
  45.     Identifier "Mouse1"
  46.     Driver "mouse"
  47.     Option "Protocol" "IMPS/2"
  48.     Option "Device" "/dev/usbmouse"
  49.     Option "ZAxisMapping" "4 5"
  50. EndSection
  52. Section "Monitor"
  53.     Identifier "monitor1"
  54.     VendorName "Plug'n Play"
  55.     HorizSync 30-80
  56.     VertRefresh 56-76
  58.     # Sony Vaio C1(X,XS,VE,VN)?
  59.     # 1024x480 @ 85.6 Hz, 48 kHz hsync
  60.     ModeLine "1024x480"    65.00 1024 1032 1176 1344   480  488  494  563 -hsync -vsync
  62.     # TV fullscreen mode or DVD fullscreen output.
  63.     # 768x576 @ 79 Hz, 50 kHz hsync
  64.     ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
  66.     # 768x576 @ 100 Hz, 61.6 kHz hsync
  67.     ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616
  68. EndSection
  70. Section "Monitor"
  71.     Identifier "monitor2"
  73.     # Sony Vaio C1(X,XS,VE,VN)?
  74.     # 1024x480 @ 85.6 Hz, 48 kHz hsync
  75.     ModeLine "1024x480"    65.00 1024 1032 1176 1344   480  488  494  563 -hsync -vsync
  77.     # TV fullscreen mode or DVD fullscreen output.
  78.     # 768x576 @ 79 Hz, 50 kHz hsync
  79.     ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
  81.     # 768x576 @ 100 Hz, 61.6 kHz hsync
  82.     ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616
  83. EndSection
  85. Section "Device"
  86.     Identifier "device1"
  87.     VendorName "ATI"
  88.     BoardName "ATI Radeon"
  89.     Driver "fglrx"
  90.     Screen 0
  91.     BusID "PCI:1:0:0"
  92.     Option "DPMS"
  93. EndSection
  95. Section "Device"
  96.     Identifier "device2"
  97.     VendorName "ATI Technologies Inc"
  98.     BoardName "ATI Radeon"
  99.     Driver "radeon"
  100.     Screen 0
  101.     BusID "PCI:1:0:1"
  102.     Option "DPMS"
  103. EndSection
  105. Section "Screen"
  106.     Identifier "screen1"
  107.     Device "device1"
  108.     Monitor "monitor1"
  109.     DefaultColorDepth 16
  111.     Subsection "Display"
  112.         Depth 8
  113.         Modes "1024x768" "800x600" "640x480"
  114.     EndSubsection
  116.     Subsection "Display"
  117.         Depth 15
  118.         Modes "1024x768" "800x600" "640x480"
  119.     EndSubsection
  121.     Subsection "Display"
  122.         Depth 16
  123.         Modes "1024x768" "800x600" "640x480"
  124.     EndSubsection
  126.     Subsection "Display"
  127.         Depth 24
  128.         Modes "1024x768" "800x600" "640x480"
  129.     EndSubsection
  130. EndSection
  132. Section "Screen"
  133.     Identifier "screen2"
  134.     Device "device2"
  135.     Monitor "monitor2"
  136.     DefaultColorDepth 16
  138.     Subsection "Display"
  139.         Depth 8
  140.         Modes "1024x768" "800x600" "640x480"
  141.     EndSubsection
  143.     Subsection "Display"
  144.         Depth 15
  145.         Modes "1024x768" "800x600" "640x480"
  146.     EndSubsection
  148.     Subsection "Display"
  149.         Depth 16
  150.         Modes "1024x768" "800x600" "640x480"
  151.     EndSubsection
  153.     Subsection "Display"
  154.         Depth 24
  155.         Modes "1024x768" "800x600" "640x480"
  156.     EndSubsection
  157. EndSection
  159. Section "ServerLayout"
  160.     Identifier "layout1"
  161.     InputDevice "Keyboard1" "CoreKeyboard"
  162.     InputDevice "Mouse1" "CorePointer"
  163.     Screen "screen1"
  164.     Screen "screen2" RightOf "screen1"
  165.     #Option "Xinerama"
  166. EndSection


Message édité par piloud le 05-05-2003 à 22:13:36
Reply

Marsh Posté le 05-05-2003 à 22:24:02    

CA MARCHE !!!!!
jai mis tous les DefaultColorDepth 16 a DefaultColorDepth 24
et c bon !
mais jjai pas la souris dans tuxracer :(
 
merci a tous quand meme !
euh javais la souris avant linstalle du driver dans tux racer maintenant je lai pu :(


Message édité par piloud le 05-05-2003 à 22:26:43
Reply

Marsh Posté le 05-05-2003 à 22:34:20    

MOUHAHAHAHAHAHHA :  
 
glxgears
20710 frames in 5.0 seconds = 4142.000 FPS
23488 frames in 5.0 seconds = 4697.600 FPS
23494 frames in 5.0 seconds = 4698.800 FPS
22917 frames in 5.0 seconds = 4583.400 FPS
Broken pipe
 
merci a tous !

Reply

Marsh Posté le 06-05-2003 à 16:09:51    

piloud a écrit :

Ah zeb_ quesque que je ferait si t'etais pas la :)  
:jap: Tu est un DIEU de la mandrake  :jap:    
 
Les 3/4 de mes problemes c toi qui les resouds :) !  
 
ps :merci aux autres qui m'ont aider aussi !


 
:D en fait, ca s'applique a toute distro, ca concerne XFree86 4.3.

Reply

Marsh Posté le 06-05-2003 à 18:55:11    

et ta pas une solution pour le pas de souris dans tuxracer ?

Reply

Marsh Posté le 06-05-2003 à 19:14:54    

piloud a écrit :

et ta pas une solution pour le pas de souris dans tuxracer ?


 
Non :( on peut pas vraiment agir sur les drivers libres.
Il y avait un problème de curseur bloqué avec les 2.9.6, qui est corrigé avec les 2.9.8. L'astuce était de changer le curseur lui-même (j'ai donné la manoeuvre dans un topic sur quake et ATI, il faudrait le retrouver). Peut-être ça marcherait ? Mais faut pas trop espérer.

Reply

Marsh Posté le 06-05-2003 à 19:44:54    

justement jai les 2.9.8 la moi !
enfin bon c pas grave !  
 
jespere qui pas trop tarder chez ati . yen a marre dattendre !

Reply

Marsh Posté le 07-05-2003 à 19:11:44    

Merci la du premier coup ca marche

Reply

Marsh Posté le    

Reply

Sujets relatifs:

Leave a Replay

Make sure you enter the(*)required information where indicate.HTML code is not allowed