# File: XF86Config-4
  # File generated by fglrxconfig (C) ATI Research, a substitute for xf86config.
   
  # Note by ATI: the below copyright notice is there for servicing possibly
  # pending third party rights on the file format and the instance of this file.
  #
  # Copyright (c) 1999 by The XFree86 Project, Inc.
  #
  # Permission is hereby granted, free of charge, to any person obtaining a
  # copy of this software and associated documentation files (the "Software" ),
  # to deal in the Software without restriction, including without limitation
  # the rights to use, copy, modify, merge, publish, distribute, sublicense,
  # and/or sell copies of the Software, and to permit persons to whom the
  # Software is furnished to do so, subject to the following conditions:
  #  
  # The above copyright notice and this permission notice shall be included in
  # all copies or substantial portions of the Software.
  #  
  # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
  # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  # SOFTWARE.
  #  
  # Except as contained in this notice, the name of the XFree86 Project shall
  # not be used in advertising or otherwise to promote the sale, use or other
  # dealings in this Software without prior written authorization from the
  # XFree86 Project.
  #
   
  # **********************************************************************
  # Refer to the XF86Config(4/5) man page for details about the format of  
  # this file.
  # **********************************************************************
   
  # **********************************************************************
  # DRI Section
  # **********************************************************************
  Section "dri"
  # Access to OpenGL ICD is allowed for all users:
      Mode 0666
  # Access to OpenGL ICD is restricted to a specific user group:
  #    Group 100    # users
  #    Mode 0660
  EndSection
   
  # **********************************************************************
  # Module section -- this  section  is used to specify
  # which dynamically loadable modules to load.
  # **********************************************************************
  #
  Section "Module"
   
  # This loads the DBE extension module.
   
      Load        "dbe"   # Double buffer extension
   
  # This loads the miscellaneous extensions module, and disables
  # initialisation of the XFree86-DGA extension within that module.
      SubSection  "extmod"
        Option    "omit xfree86-dga"   # don't initialise the DGA extension
      EndSubSection
   
  # This loads the Type1 and FreeType font modules
      Load        "type1"
      Load        "freetype"
   
  # This loads the GLX module
      Load        "glx"   # libglx.a
      Load        "dri"   # libdri.a
   
  EndSection
   
  # **********************************************************************
  # Files section.  This allows default font and rgb paths to be set
  # **********************************************************************
   
  Section "Files"
   
  # The location of the RGB database.  Note, this is the name of the
  # file minus the extension (like ".txt" or ".db" ).  There is normally
  # no need to change the default.
   
      RgbPath "/usr/X11R6/lib/X11/rgb"
   
  # Multiple FontPath entries are allowed (which are concatenated together),
  # as well as specifying multiple comma-separated entries in one FontPath
  # command (or a combination of both methods)
  #  
  # If you don't have a floating point coprocessor and emacs, Mosaic or other
  # programs take long to start up, try moving the Type1 and Speedo directory
  # to the end of this list (or comment them out).
  #  
   
  #    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
      FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
      FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
      FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
      FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
      FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
      FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
      FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
   
  # The module search path.  The default path is shown here.
   
  #    ModulePath "/usr/X11R6/lib/modules"
   
  EndSection
   
  # **********************************************************************
  # Server flags section.
  # **********************************************************************
   
  Section "ServerFlags"
   
  # Uncomment this to cause a core dump at the spot where a signal is
  # received.  This may leave the console in an unusable state, but may
  # provide a better stack trace in the core dump to aid in debugging
   
  #    Option "NoTrapSignals"
   
  # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
  # This allows clients to receive this key event.
   
  #    Option "DontZap"
   
  # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
  # sequences.  This allows clients to receive these key events.
   
  #    Option "Dont Zoom"
   
  # Uncomment this to disable tuning with the xvidtune client. With
  # it the client can still run and fetch card and monitor attributes,
  # but it will not be allowed to change them. If it tries it will
  # receive a protocol error.
   
  #    Option "DisableVidModeExtension"
   
  # Uncomment this to enable the use of a non-local xvidtune client.
   
  #    Option "AllowNonLocalXvidtune"
   
  # Uncomment this to disable dynamically modifying the input device
  # (mouse and keyboard) settings.
   
  #    Option "DisableModInDev"
   
  # Uncomment this to enable the use of a non-local client to
  # change the keyboard or mouse settings (currently only xset).
   
  #    Option "AllowNonLocalModInDev"
   
  EndSection
   
  # **********************************************************************
  # Input devices
  # **********************************************************************
   
  # **********************************************************************
  # Core keyboard's InputDevice section
  # **********************************************************************
   
  Section "InputDevice"
   
      Identifier "Keyboard1"
      Driver "Keyboard"
  # For most OSs the protocol can be omitted (it defaults to "Standard" ).
  # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
  # uncomment the following line.
   
  #    Option "Protocol"   "Xqueue"
   
      Option "AutoRepeat" "500 30"
   
  # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
  #    Option "Xleds"      "1 2 3"
   
  #    Option "LeftAlt"    "Meta"
  #    Option "RightAlt"   "ModeShift"
   
  # To customise the XKB settings to suit your keyboard, modify the
  # lines below (which are the defaults).  For example, for a non-U.S.
  # keyboard, you will probably want to use:
  #    Option "XkbModel"   "pc102"
  # If you have a US Microsoft Natural keyboard, you can use:
  #    Option "XkbModel"   "microsoft"
  #
  # Then to change the language, change the Layout setting.
  # For example, a german layout can be obtained with:
  #    Option "XkbLayout"  "de"
  # or:
  #    Option "XkbLayout"  "de"
  #    Option "XkbVariant" "nodeadkeys"
  #
  # If you'd like to switch the positions of your capslock and
  # control keys, use:
  #    Option "XkbOptions" "ctrl:swapcaps"
   
  # These are the default XKB settings for XFree86
  #    Option "XkbRules"   "xfree86"
  #    Option "XkbModel"   "pc101"
  #    Option "XkbLayout"  "us"
  #    Option "XkbVariant" ""
  #    Option "XkbOptions" ""
   
  #    Option "XkbDisable"
   
      Option "XkbRules" "xfree86"
      Option "XkbModel" "pc105"
      Option "XkbLayout" "fr"
   
  EndSection
   
   
  # **********************************************************************
  # Core Pointer's InputDevice section
  # **********************************************************************
   
  Section "InputDevice"
   
  # Identifier and driver
   
      Identifier "Mouse1"
      Driver "mouse"
      Option "Protocol"   "ImPS/2"
      Option "ZAxisMapping"   "4 5"
      Option "Device"     "/dev/mouse"
   
  # When using XQUEUE, comment out the above two lines, and uncomment
  # the following line.
   
  #    Option "Protocol"   "Xqueue"
   
  # Baudrate and SampleRate are only for some Logitech mice. In
  # almost every case these lines should be omitted.
   
  #    Option "BaudRate"   "9600"
  #    Option "SampleRate" "150"
   
  # Emulate3Buttons is an option for 2-button Microsoft mice
  # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
   
  #    Option "Emulate3Buttons"
  #    Option "Emulate3Timeout"    "50"
   
  # ChordMiddle is an option for some 3-button Logitech mice
   
  #    Option "ChordMiddle"
   
  EndSection
   
   
  # **********************************************************************
  # Other input device sections  
  # this is optional and is required only if you
    # are using extended input devices.  This is for example only.  Refer
  # to the XF86Config man page for a description of the options.
  # **********************************************************************
  #
  # Section "InputDevice"  
  #    Identifier  "Mouse2"
  #    Driver      "mouse"
  #    Option      "Protocol"      "MouseMan"
  #    Option      "Device"        "/dev/mouse2"
  # EndSection
  #
  # Section "InputDevice"
  #    Identifier "spaceball"
  #    Driver     "magellan"
  #    Option     "Device"         "/dev/cua0"
  # EndSection
  #
  # Section "InputDevice"
  #    Identifier "spaceball2"
  #    Driver     "spaceorb"
  #    Option     "Device"         "/dev/cua0"
  # EndSection
  #
  # Section "InputDevice"
  #    Identifier "touchscreen0"
  #    Driver     "microtouch"
  #    Option     "Device"         "/dev/ttyS0"
  #    Option     "MinX"           "1412"
  #    Option     "MaxX"           "15184"
  #    Option     "MinY"           "15372"
  #    Option     "MaxY"           "1230"
  #    Option     "ScreenNumber"   "0"
  #    Option     "ReportingMode"  "Scaled"
  #    Option     "ButtonNumber"   "1"
  #    Option     "SendCoreEvents"
  # EndSection
  #
  # Section "InputDevice"
  #    Identifier "touchscreen1"
  #    Driver     "elo2300"
  #    Option     "Device"         "/dev/ttyS0"
  #    Option     "MinX"           "231"
  #    Option     "MaxX"           "3868"
  #    Option     "MinY"           "3858"
  #    Option     "MaxY"           "272"
  #    Option     "ScreenNumber"   "0"
  #    Option     "ReportingMode"  "Scaled"
  #    Option     "ButtonThreshold"    "17"
  #    Option     "ButtonNumber"   "1"
  #    Option     "SendCoreEvents"
  # EndSection
   
  # **********************************************************************
  # Monitor section
  # **********************************************************************
   
  # Any number of monitor sections may be present
   
  Section "Monitor"
      Identifier  "Monitor0"
      HorizSync   30-96
      VertRefresh 50-180
      Option "DPMS"
   
  # === mode lines based on GTF ===
  # VGA @ 100Hz
  # Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
  # SVGA @ 100Hz
  # Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
  # XVGA @ 100Hz
  # Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
  # 1152x864 @ 60Hz
  # Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
  # 1152x864 @ 85Hz
  # Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
  # 1152x864 @ 100Hz
  # Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
  # 1280x960 @ 75Hz
  # Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
  # 1280x960 @ 100Hz
  # Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
  # SXGA @ 100Hz
  # Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
  # 1600x1000 @ 60Hz
  # Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
  # 1600x1000 @ 75Hz
  # Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
  # 1600x1000 @ 85Hz
  # Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
  # 1600x1000 @ 100Hz
  # Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
  # 1600x1024 @ 60Hz
  # Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
  # 1600x1024 @ 75Hz
  # Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
  # 1600x1024 @ 76Hz
  # Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
  # 1600x1024 @ 85Hz
  # Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
  # 1920x1080 @ 60Hz
  # Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
  # 1920x1080 @ 75Hz
  # Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
  # 1920x1200 @ 60Hz
  # Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
  # 1920x1200 @ 75Hz
  # Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
  # 2048x1536 @ 60
  # Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
  # 2048x1536 @ 60
  # Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
  # 1400x1050 @ 60Hz M9 Laptop mode  
  # ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
  # 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
  # Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
  # 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
  # Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync
   
  EndSection
   
   
  # **********************************************************************
  # Graphics device section
  # **********************************************************************
   
  # Any number of graphics device sections may be present
   
  # Standard VGA Device:
   
  Section "Device"
      Identifier  "Standard VGA"
      VendorName  "Unknown"
      BoardName   "Unknown"
   
  # The chipset line is optional in most cases.  It can be used to override
  # the driver's chipset detection, and should not normally be specified.
   
  #    Chipset     "generic"
   
  # The Driver line must be present.  When using run-time loadable driver
  # modules, this line instructs the server to load the specified driver
  # module.  Even when not using loadable driver modules, this line
  # indicates which driver should interpret the information in this section.
   
      Driver      "vga"
  # The BusID line is used to specify which of possibly multiple devices
  # this section is intended for.  When this line isn't present, a device
  # section can only match up with the primary video device.  For PCI
  # devices a line like the following could be used.  This line should not
  # normally be included unless there is more than one video device
  # installed.
   
  #    BusID       "PCI:0:10:0"
   
  #    VideoRam    256
   
  #    Clocks      25.2 28.3
   
  EndSection
   
  # === ATI device section ===
   
  Section "Device"
      Identifier                          "ATI Graphics Adapter"
      Driver                              "fglrx"
  # === disable PnP Monitor  ===
      #Option                              "NoDDC"
  # === disable/enable XAA/DRI ===
      Option "no_accel"                   "no"
      Option "no_dri"                     "no"
  # === FireGL DDX driver module specific settings ===
  # === Screen Management ===
      Option "DesktopSetup"               "0x00000000"  
      Option "MonitorLayout"              "AUTO, AUTO"
      Option "IgnoreEDID"                 "off"
      Option "HSync2"                     "unspecified"  
      Option "VRefresh2"                  "unspecified"  
      Option "ScreenOverlap"              "0"  
      Option "GammaCorrectionI"           "0x00000000"
      Option "GammaCorrectionII"          "0x00000000"
  # === OpenGL specific profiles/settings ===
      Option "Capabilities"               "0x00000000"
  # === Video Overlay for the Xv extension ===
      Option "VideoOverlay"               "on"
  # === OpenGL Overlay ===
  # Note: When OpenGL Overlay is enabled, Video Overlay
  #       will be disabled automatically
      Option "OpenGLOverlay"              "off"
  # === Misc Options ===
      Option "UseFastTLS"                 "0"
      Option "BlockSignalsOnLock"         "on"
      BusID "PCI:1:0:0"    # vendor=1002, device=514c
      Screen 0
  EndSection
   
  # **********************************************************************
  # Screen sections
  # **********************************************************************
   
  # Any number of screen sections may be present.  Each describes
  # the configuration of a single screen.  A single specific screen section
  # may be specified from the X server command line with the "-screen"
  # option.
  Section "Screen"
      Identifier  "Screen0"
      Device      "ATI Graphics Adapter"
      Monitor     "Monitor0"
      DefaultDepth 24
      #Option "backingstore"
   
      Subsection "Display"
          Depth       24
          Modes       "1400x1050" "1600x1200" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
          ViewPort    0 0  # initial origin if mode is smaller than desktop
    #        Virtual     1280 1024
      EndSubsection
  EndSection
   
  # **********************************************************************
  # ServerLayout sections.
  # **********************************************************************
   
  # Any number of ServerLayout sections may be present.  Each describes
  # the way multiple screens are organised.  A specific ServerLayout
  # section may be specified from the X server command line with the
  # "-layout" option.  In the absence of this, the first section is used.
  # When now ServerLayout section is present, the first Screen section
  # is used alone.
   
  Section "ServerLayout"
   
  # The Identifier line must be present
      Identifier  "Server Layout"
   
  # Each Screen line specifies a Screen section name, and optionally
  # the relative position of other screens.  The four names after
  # primary screen name are the screens to the top, bottom, left and right
  # of the primary screen.
   
      Screen "Screen0"
   
  # Each InputDevice line specifies an InputDevice section name and
  # optionally some options to specify the way the device is to be
  # used.  Those options include "CorePointer", "CoreKeyboard" and
  # "SendCoreEvents".
   
      InputDevice "Mouse1" "CorePointer"
      InputDevice "Keyboard1" "CoreKeyboard"
   
  EndSection
   
  ### EOF ###