installation xen sous debian lenny - Installation - Linux et OS Alternatifs
MarshPosté le 07-10-2007 à 12:36:05
Bonjour,
J'ai voulu essayer d'installer xen sur ma debian lenny, qui a un noyau 2.6.21, mais j'ai des erreurs quand j'essaie de le lancer...
Déja, au niveau de l'install des paquets, j'ai remarqué, qu'il n'y avait pas de linux-image 2.6.21 por xe, mais j'avais lu qu'apparemment, ce n'est plus la peine à partir du 2.6.21.
Les NOUVEAUX paquets suivants vont être automatiquement installés : iproute libatm1 libc6-xen xen-hypervisor-3.1-1-i386 xen-utils-common .... Les NOUVEAUX paquets suivants vont être installés : iproute libatm1 libc6-xen xen-docs-3.1 xen-hypervisor-3.1-1-i386 xen-utils-3.1-1 xen-utils-common
J'ai crée un fichier image /home/thierry/xen_debian_etch.iso sur laquelle j'ai mis une debian etch par debootstrap.
J'ai lancé le script pour la configuration du réseau en bridge: /etc/xen/scripts/network-bridge start
Mais quand je tape: xm create -c /etc/xen/debian_etch
Cela me donne:
WARING! Can't find hypervisor information in sysfs! ERROR Internal error: Could not obtain handle on privileged command interface (2 = No such file or directory) Using config file "/etc/xen/debian_etch". ERROR Internal error: Could not obtain handle on privileged command interface (2 = No such file or directory) ERROR Internal error: Could not obtain handle on privileged command interface (2 = No such file or directory) ERROR Internal error: Could not obtain handle on privileged command interface (2 = No such file or directory) ERROR Internal error: Could not obtain handle on privileged command interface (2 = No such file or directory) ERROR Internal error: Could not obtain handle on privileged command interface (2 = No such file or directory) ERROR Internal error: Could not obtain handle on privileged command interface (2 = No such file or directory) ERROR Internal error: Could not obtain handle on privileged command interface (2 = No such file or directory) ERROR Internal error: Could not obtain handle on privileged command interface (2 = No such file or directory) Error: Unable to connect to xend: No such file or directory. Is xend running?
Et quand j'essaie de lancer xend, ca me donne ca:
# xend & [3] 16978 # WARING! Can't find hypervisor information in sysfs! ERROR Internal error: Could not obtain handle on privileged command interface (2 = No such file or directory) ERROR Internal error: Could not obtain handle on privileged command interface (2 = No such file or directory) Traceback (most recent call last): File "/usr/lib/xen-default/bin/xend", line 36, in ? from xen.xend.server import SrvDaemon File "/usr/lib/xen-3.1-1/lib/python/xen/xend/server/SrvDaemon.py", line 26, in ? import relocate File "/usr/lib/xen-3.1-1/lib/python/xen/xend/server/relocate.py", line 26, in ? from xen.xend import XendDomain File "/usr/lib/xen-3.1-1/lib/python/xen/xend/XendDomain.py", line 35, in ? from xen.xend import XendOptions, XendCheckpoint, XendDomainInfo File "/usr/lib/xen-3.1-1/lib/python/xen/xend/XendCheckpoint.py", line 22, in ? from xen.xend.XendConfig import XendConfig File "/usr/lib/xen-3.1-1/lib/python/xen/xend/XendConfig.py", line 27, in ? from xen.xend.XendDevices import XendDevices File "/usr/lib/xen-3.1-1/lib/python/xen/xend/XendDevices.py", line 22, in ? from xen.xend.server import blkif, netif, tpmif, pciif, iopif, irqif, usbif, vfbif File "/usr/lib/xen-3.1-1/lib/python/xen/xend/server/pciif.py", line 38, in ? xc = xen.lowlevel.xc.xc() xen.lowlevel.xc.Error: (1, 'Internal error', 'Could not obtain handle on privileged command interface (2 = No such file or directory)')
[3]+ Exit 1 xend
Ext-ce que ca vient du noyau 2.6.21?
Je l'ai recompilé recemment à partir des sources mais en reprenant la config du linux-image 2.6.21.
Marsh Posté le 07-10-2007 à 12:36:05
Bonjour,
J'ai voulu essayer d'installer xen sur ma debian lenny, qui a un noyau
2.6.21, mais j'ai des erreurs quand j'essaie de le lancer...
Déja, au niveau de l'install des paquets, j'ai remarqué, qu'il n'y avait
pas de linux-image 2.6.21 por xe, mais j'avais lu qu'apparemment, ce
n'est plus la peine à partir du 2.6.21.
Voila les paquets installés:
# aptitude install xen-utils-3.1-1 xen-docs-3.1 xen-hypervisor
.....
Les NOUVEAUX paquets suivants vont être automatiquement installés :
iproute libatm1 libc6-xen xen-hypervisor-3.1-1-i386 xen-utils-common
....
Les NOUVEAUX paquets suivants vont être installés :
iproute libatm1 libc6-xen xen-docs-3.1 xen-hypervisor-3.1-1-i386
xen-utils-3.1-1 xen-utils-common
J'ai crée un fichier image /home/thierry/xen_debian_etch.iso sur
laquelle j'ai mis une debian etch par debootstrap.
J'ai lancé le script pour la configuration du réseau en bridge:
/etc/xen/scripts/network-bridge start
Ce qui me donne ceci, en nouvelle interface:
xenbr0 Lien encap:Ethernet HWaddr 00:0E:7B:AC:A6:97
inet adr:192.168.0.12 Bcast:192.168.0.255 Masque:255.255.255.0
adr inet6: fe80::200:ff:fe00:0/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:25224 errors:0 dropped:0 overruns:0 frame:0
TX packets:22029 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
RX bytes:6671645 (6.3 MiB) TX bytes:1878313 (1.7 MiB)
la configuration de la machine virtuelle /etc/xen/debian_etch donne cela:
kernel = "/boot/vmlinuz-2.6.21.0710041819"
memory = 128
name = "debian_etch"
root = "/dev/hda1 ro"
ramdisk = '/boot/initrd.img-2.6.21.0710041819'
disk = [
'filehome/thierry/xen_debian_etch.iso,hda1,w','phydev/hda6,hda2,w']
vif = [ '' ]
dhcp="dhcp"
Mais quand je tape: xm create -c /etc/xen/debian_etch
Cela me donne:
WARING! Can't find hypervisor information in sysfs!
ERROR Internal error: Could not obtain handle on privileged command
interface (2 = No such file or directory)
Using config file "/etc/xen/debian_etch".
ERROR Internal error: Could not obtain handle on privileged command
interface (2 = No such file or directory)
ERROR Internal error: Could not obtain handle on privileged command
interface (2 = No such file or directory)
ERROR Internal error: Could not obtain handle on privileged command
interface (2 = No such file or directory)
ERROR Internal error: Could not obtain handle on privileged command
interface (2 = No such file or directory)
ERROR Internal error: Could not obtain handle on privileged command
interface (2 = No such file or directory)
ERROR Internal error: Could not obtain handle on privileged command
interface (2 = No such file or directory)
ERROR Internal error: Could not obtain handle on privileged command
interface (2 = No such file or directory)
ERROR Internal error: Could not obtain handle on privileged command
interface (2 = No such file or directory)
Error: Unable to connect to xend: No such file or directory. Is xend
running?
Et quand j'essaie de lancer xend, ca me donne ca:
# xend &
[3] 16978
# WARING! Can't find hypervisor information in sysfs!
ERROR Internal error: Could not obtain handle on privileged command
interface (2 = No such file or directory)
ERROR Internal error: Could not obtain handle on privileged command
interface (2 = No such file or directory)
Traceback (most recent call last):
File "/usr/lib/xen-default/bin/xend", line 36, in ?
from xen.xend.server import SrvDaemon
File "/usr/lib/xen-3.1-1/lib/python/xen/xend/server/SrvDaemon.py",
line 26, in ?
import relocate
File "/usr/lib/xen-3.1-1/lib/python/xen/xend/server/relocate.py", line
26, in ?
from xen.xend import XendDomain
File "/usr/lib/xen-3.1-1/lib/python/xen/xend/XendDomain.py", line 35, in ?
from xen.xend import XendOptions, XendCheckpoint, XendDomainInfo
File "/usr/lib/xen-3.1-1/lib/python/xen/xend/XendCheckpoint.py", line
22, in ?
from xen.xend.XendConfig import XendConfig
File "/usr/lib/xen-3.1-1/lib/python/xen/xend/XendConfig.py", line 27, in ?
from xen.xend.XendDevices import XendDevices
File "/usr/lib/xen-3.1-1/lib/python/xen/xend/XendDevices.py", line 22,
in ?
from xen.xend.server import blkif, netif, tpmif, pciif, iopif,
irqif, usbif, vfbif
File "/usr/lib/xen-3.1-1/lib/python/xen/xend/server/pciif.py", line
38, in ?
xc = xen.lowlevel.xc.xc()
xen.lowlevel.xc.Error: (1, 'Internal error', 'Could not obtain handle on
privileged command interface (2 = No such file or directory)')
[3]+ Exit 1 xend
Ext-ce que ca vient du noyau 2.6.21?
Je l'ai recompilé recemment à partir des sources mais en reprenant la
config du linux-image 2.6.21.
Si quelqu'un a une idée? :-)
Merci :-)