probléme de son avec sis 7012 - Hardware - Linux et OS Alternatifs
MarshPosté le 11-04-2005 à 14:35:29
Bonjour J´ai installer le fedora 3 sur mon portable (c´est ma première expérience avec linux). J´ai une carte de son sis 7012.Le driver sur linux devrai être intel8x0 et on peux voir que il ne reconnaît pas la carte (il voit seulement que c´est SIS) mas il choisit intel8x0.Mas de toute façon j´ai pas de son. Quand je teste le son, j´ai rien. J´essaye de lancer alsamixer et je reçois cette message : no mixer found .Aucun mixer (aumix, kmix, etc ) ouvre. Ça commence à être désespérant. Le fichier /proc/asound/cards me montre le sis si7013 modem. Je trouve cela drôle. Si c´est un modem, c´est pas une carte de son ???je sais que sis si7013 modem c´est différent de sis 7012 mas pourquoi ce modem apparaît ici ??? Je post des informations utiles.
merci
lscpi -v: 00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS 645xx (rev 03) Subsystem: Wistron Corp.: Unknown device 4016 Flags: bus master, medium devsel, latency 64 Memory at e8000000 (32-bit, non-prefetchable) [size=64M] Capabilities: [c0] AGP version 3.0
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 14) Flags: bus master, medium devsel, latency 0
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller Flags: medium devsel, IRQ 11 I/O ports at 9000 [size=32]
00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller (prog-if 10 [OHCI]) Subsystem: Wistron Corp.: Unknown device 1054 Flags: bus master, medium devsel, latency 64, IRQ 11 Memory at ec000000 (32-bit, non-prefetchable) [size=4K] Capabilities: [64] Power Management version 2
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 [Master]) Subsystem: Wistron Corp.: Unknown device 1056 Flags: bus master, medium devsel, latency 128, IRQ 10 I/O ports at 1000 [size=16]
00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) (prog-if 00 [Generic]) Subsystem: Wistron Corp.: Unknown device 1061 Flags: bus master, medium devsel, latency 173, IRQ 11 I/O ports at 1400 [size=256] I/O ports at 1080 [size=128] Capabilities: [48] Power Management version 2
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0) Subsystem: Wistron Corp.: Unknown device 2000 Flags: bus master, medium devsel, latency 173, IRQ 11 I/O ports at 1c00 [size=256] I/O ports at 1800 [size=128] Capabilities: [48] Power Management version 2
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI]) Subsystem: Wistron Corp.: Unknown device 1056 Flags: bus master, medium devsel, latency 64, IRQ 11 Memory at ec001000 (32-bit, non-prefetchable) [size=4K] Capabilities: [dc] Power Management version 2
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI]) Subsystem: Wistron Corp.: Unknown device 1056 Flags: bus master, medium devsel, latency 64, IRQ 11 Memory at ec002000 (32-bit, non-prefetchable) [size=4K] Capabilities: [dc] Power Management version 2
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI]) Subsystem: Wistron Corp.: Unknown device 1056 Flags: bus master, medium devsel, latency 64, IRQ 11 Memory at ec003000 (32-bit, non-prefetchable) [size=4K] Capabilities: [dc] Power Management version 2
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI]) Subsystem: Wistron Corp.: Unknown device 1056 Flags: bus master, medium devsel, latency 64, IRQ 11 Memory at ec004000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] Power Management version 2
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91) Subsystem: Wistron Corp.: Unknown device 1055 Flags: bus master, medium devsel, latency 173, IRQ 11 I/O ports at 2000 [size=256] Memory at ec005000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2
Marsh Posté le 11-04-2005 à 14:35:29
Bonjour
J´ai installer le fedora 3 sur mon portable (c´est ma première expérience avec linux).
J´ai une carte de son sis 7012.Le driver sur linux devrai être intel8x0 et on peux voir que il ne reconnaît pas la carte (il voit seulement que c´est SIS) mas il choisit intel8x0.Mas de toute façon j´ai pas de son.
Quand je teste le son, j´ai rien. J´essaye de lancer alsamixer et je reçois cette message : no mixer found .Aucun mixer (aumix, kmix, etc ) ouvre.
Ça commence à être désespérant.
Le fichier /proc/asound/cards me montre le sis si7013 modem. Je trouve cela drôle. Si c´est un modem, c´est pas une carte de son ???je sais que sis si7013 modem c´est différent de sis 7012 mas pourquoi ce modem apparaît ici ???
Je post des informations utiles.
merci
lscpi -v:
00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS 645xx (rev 03)
Subsystem: Wistron Corp.: Unknown device 4016
Flags: bus master, medium devsel, latency 64
Memory at e8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 3.0
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202 (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
Memory behind bridge: ed000000-edffffff
Prefetchable memory behind bridge: f0000000-f7ffffff
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 14)
Flags: bus master, medium devsel, latency 0
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
Flags: medium devsel, IRQ 11
I/O ports at 9000 [size=32]
00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller (prog-if 10 [OHCI])
Subsystem: Wistron Corp.: Unknown device 1054
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at ec000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [64] Power Management version 2
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 [Master])
Subsystem: Wistron Corp.: Unknown device 1056
Flags: bus master, medium devsel, latency 128, IRQ 10
I/O ports at 1000 [size=16]
00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) (prog-if 00 [Generic])
Subsystem: Wistron Corp.: Unknown device 1061
Flags: bus master, medium devsel, latency 173, IRQ 11
I/O ports at 1400 [size=256]
I/O ports at 1080 [size=128]
Capabilities: [48] Power Management version 2
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
Subsystem: Wistron Corp.: Unknown device 2000
Flags: bus master, medium devsel, latency 173, IRQ 11
I/O ports at 1c00 [size=256]
I/O ports at 1800 [size=128]
Capabilities: [48] Power Management version 2
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Wistron Corp.: Unknown device 1056
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at ec001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Wistron Corp.: Unknown device 1056
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at ec002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Wistron Corp.: Unknown device 1056
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at ec003000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI])
Subsystem: Wistron Corp.: Unknown device 1056
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at ec004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
Subsystem: Wistron Corp.: Unknown device 1055
Flags: bus master, medium devsel, latency 173, IRQ 11
I/O ports at 2000 [size=256]
Memory at ec005000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
00:09.0 CardBus bridge: ENE Technology Inc CB1420 Cardbus Controller (rev 01)
Subsystem: Wistron Corp.: Unknown device 3202
Flags: bus master, medium devsel, latency 168, IRQ 10
Memory at 20000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 20400000-207ff000 (prefetchable)
Memory window 1: 20800000-20bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
16-bit legacy interface ports at 0001
00:09.1 CardBus bridge: ENE Technology Inc CB1420 Cardbus Controller (rev 01)
Subsystem: Wistron Corp.: Unknown device 3202
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at 20001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 20c00000-20fff000 (prefetchable)
Memory window 1: 21000000-213ff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
16-bit legacy interface ports at 0001
01:00.0 VGA compatible controller: nVidia Corporation NV18M [GeForce4 488 Go] (rev a2) (prog-if 00 [VGA])
Subsystem: Wistron Corp.: Unknown device 205e
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 11
Memory at ed000000 (32-bit, non-prefetchable) [size=16M]
Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 3.0
lsmod:
Module Size Used by
parport_pc 24705 1
lp 11565 0
parport 41737 2 parport_pc,lp
autofs4 24005 0
i2c_dev 10433 0
i2c_core 22081 1 i2c_dev
sunrpc 160421 1
ds 16965 4
ipt_REJECT 6465 1
ipt_state 1857 1
ip_conntrack 40693 1 ipt_state
iptable_filter 2753 1
ip_tables 16193 3 ipt_REJECT,ipt_state,iptable_filter
button 6481 0
battery 8517 0
ac 4805 0
md5 4033 1
ipv6 232577 8
ohci1394 35033 0
ieee1394 302869 1 ohci1394
joydev 8705 0
yenta_socket 18753 0
pcmcia_core 59913 2 ds,yenta_socket
ohci_hcd 22225 0
ehci_hcd 31557 0
snd_intel8x0m 18185 3
snd_intel8x0 34829 0
snd_ac97_codec 64401 2 snd_intel8x0m,snd_intel8x0
snd_pcm_oss 47609 0
snd_mixer_oss 17217 2 snd_pcm_oss
snd_pcm 97993 3 snd_intel8x0m,snd_intel8x0,snd_pcm_oss
snd_timer 29765 1 snd_pcm
snd_page_alloc 9673 3 snd_intel8x0m,snd_intel8x0,snd_pcm
gameport 4801 1 snd_intel8x0
snd_mpu401_uart 8769 1 snd_intel8x0
snd_rawmidi 26725 1 snd_mpu401_uart
snd_seq_device 8137 1 snd_rawmidi
snd 54053 14 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 9889 2 snd
sis900 18629 0
floppy 58609 0
dm_snapshot 17029 0
dm_zero 2369 0
dm_mirror 23341 2
ext3 116809 2
jbd 74969 1 ext3
dm_mod 54741 6 dm_snapshot,dm_zero,dm_mirror
cat /proc/interrupts:
CPU0
0: 676212 XT-PIC timer
1: 253 XT-PIC i8042
2: 0 XT-PIC cascade
8: 1 XT-PIC rtc
9: 0 XT-PIC acpi
10: 1 XT-PIC yenta
11: 14563 XT-PIC SiS SI7013 Modem, ehci_hcd, ohci_hcd, ohci_hcd, ohci_hcd, yenta, ohci1394
14: 14093 XT-PIC ide0
15: 1278 XT-PIC ide1
NMI: 0
ERR: 0
modprobe.conf
alias eth0 sis900
alias snd-card-0 snd-intel8x0
options snd-card-0 index=0
install snd-intel8x0 /sbin/modprobe --ignore-install snd-intel8x0 && /usr/sbin/alsactl restore >/dev/null 2>&1 || :
remove snd-intel8x0 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-intel8x0
alias usb-controller ehci-hcd
alias usb-controller1 ohci-hcd
alias ieee1394-controller ohci1394
dmseg:
cc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Tue Nov 2 14:41:25 EST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fdf0000 (usable)
BIOS-e820: 000000001fdf0000 - 000000001fdff000 (ACPI data)
BIOS-e820: 000000001fdff000 - 000000001fe00000 (ACPI NVS)
BIOS-e820: 000000001fe00000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
509MB LOWMEM available.
zapping low mappings.
On node 0 totalpages: 130544
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126448 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 HTCLTD ) @ 0x000f61b0
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1fdfae89
ACPI: FADT (v001 Wistro K3D 0x06040000 PTL 0x000f4240) @ 0x1fdfef14
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x1fdfef88ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1fdfefd8
ACPI: DSDT (v001 WIST K3D 0x06040000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x8008
Built 1 zonelists
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
mapped 4G/4G trampoline to ffff4000.
Initializing CPU#0
CPU 0 irqstacks, hard=023d5000 soft=023d4000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 2664.918 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 512840k/522176k available (2068k kernel code, 8716k reserved, 647k data, 144k init, 0k highmem)
Calibrating delay loop... 5259.26 BogoMIPS (lpj=2629632)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Edge set to Level Trigger.
checking if image is initramfs... it is
Freeing initrd memory: 947k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd5b9, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Uncovering SIS963 that hid as a SIS503 (compatible=1)
Enabling SiS 96x SMBus.
PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 *11)
ACPI: Embedded Controller [EC] (gpe 30)
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:02.3[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:02.5[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:02.6[C] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:09.1[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
Simple Boot Flag at 0x35 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1113031474.618:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 6ECDA687281A73E5
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: probe of vesafb0 failed with error -6
ACPI: Processor [CPU0] (supports C1 C2)
ACPI: Thermal Zone [THRS] (25 C)
ACPI: Thermal Zone [THRC] (17 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected SiS 648 chipset
agpgart: Maximum main memory to use for agp memory: 437M
agpgart: AGP aperture is 64M @ 0xe8000000
i8042.c: Detected active multiplexing controller, rev 1.9.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
PCI: Enabling device 0000:00:02.6 (0000 -> 0001)
ACPI: PCI interrupt 0000:00:02.6[C] -> GSI 11 (level, low) -> IRQ 11
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
ACPI: PCI interrupt 0000:00:02.5[A] -> GSI 10 (level, low) -> IRQ 10
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: FUJITSU MHS2040AT, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Slimtype COMBO LSC-24081M, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 > hda3 hda4
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 9362)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S3 S4 S5)
ACPI wakeup devices:
SLP2 LID BAT0 MDM SLAN GLAN MMDM
Freeing unused kernel memory: 144k freed
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 4 roles, 280 types, 16 bools
security: 53 classes, 5494 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
inserting floppy driver for 2.6.9-1.667
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
sis900.c: v1.08.07 11/02/2003
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 11 (level, low) -> IRQ 11
divert: allocating divert_blk for eth0
eth0: ICS LAN PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0x2000, IRQ 11, 00:0a:e4:43:32:ba.
PCI: Enabling device 0000:00:02.7 (0000 -> 0001)
ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 11 (level, low) -> IRQ 11
AC'97 0 does not respond - RESET
Intel ICH: probe of 0000:00:02.7 failed with error -13
ACPI: PCI interrupt 0000:00:02.6[C] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: irq 11, pci mem 22834000
SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: irq 11, pci mem 22838000
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: irq 11, pci mem 228a0000
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: irq 11, pci mem 228ee000
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10
Yenta: CardBus bridge found at 0000:00:09.0 [17c0:3202]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:09.0, mfunc 0x01001022, devctl 0x44
usb 2-2: new low speed USB device using address 2
input: USB HID v1.10 Mouse [Genius NetScroll + Mini Traveler] on usb-0000:00:03.0-2
Yenta: ISA IRQ mask 0x0000, PCI irq 10
Socket status: 30000006
ACPI: PCI interrupt 0000:00:09.1[B] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:09.1 [17c0:3202]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:09.1, mfunc 0x01001022, devctl 0x44
Yenta: ISA IRQ mask 0x0000, PCI irq 11
Socket status: 30000006
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI interrupt 0000:00:02.3[B] -> GSI 11 (level, low) -> IRQ 11
ohci1394: fw-host0: Unexpected PCI resource length of 1000!
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[ec000000-ec0007ff] Max Packet=[2048]
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
ieee1394: Host added: ID:BUS[0-00:1023] GUID[000ae40322101b2e]
NET: Registered protocol family 10
Disabled Privacy Extensions on device 02369a00(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
ACPI: AC Adapter [AC] (off-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLP2]
ACPI: Lid Switch [LID]
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda3, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 1048568k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4079 buckets, 32632 max) - 356 bytes per conntrack
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x1c0-0x1cf 0x378-0x37f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
eth0: Media Link Off
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
i2c /dev entries driver
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
lp0: using parport0 (polling).
lp0: console ready
ISO 9660 Extensions: RRIP_1991A
SELinux: initialized (dev hdc, type iso9660), uses genfs_contexts