carte pci HPT372A et kernel 2.6 :/

carte pci HPT372A et kernel 2.6 :/ - Hardware - Linux et OS Alternatifs

Marsh Posté le 28-02-2004 à 01:14:22    

:hello: ,
j ai des probleme avec cette carte pci qui supporte 2 hdd, je na rrive as a la faire marcher sous debian.
avec knoppix pas de pb.
 
dans le menuconfig j ai active ca :

Code :
  1. < >         HPT34X chipset support                                                   
  2. <M>         HPT36X/37X chipset support                                               
  3. < >         National SCx200 chipset support


 
et ensuite apres avoir reboote
j ai ce fichier dans /lib/monkernel../driver/ide/pci/hpt366.ko
 
je fais modprob hpt366 OK
mais comment savoir quel sont les disques concerne dans /dev/hdx ?
j a essayer de mounter hde1 hde5 (c etait c nom avec knoppix) mais rien a faire.
 

Code :
  1. sd_mod                 13920  0
  2. scsi_mod               77356  1 sd_mod
  3. hpt366                 17668  0
  4. snd_pcm_oss            53412  0
  5. snd


 
 :(

Reply

Marsh Posté le 28-02-2004 à 01:14:22   

Reply

Marsh Posté le 28-02-2004 à 01:42:06    

log de boot
pb de memoire ! 1 gb d installer 800 de detecter :/
et usb car ma souri intel mouse explorer 3 ne s allume pas, j utilise une ps2 a la place.
pas de trace de la carte hpt372  :cry:  

Code :
  1. Linux version 2.6.2.040227 (root@coulix) (version gcc 3.3.3 (Debian)) #1 Fri Feb 27 21:20:24 EST 2004
  2. BIOS-provided physical RAM map:
  3. BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
  4. BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
  5. BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  6. BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
  7. BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
  8. BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
  9. BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
  10. BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  11. BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
  12. Warning only 896MB will be used.
  13. Use a HIGHMEM enabled kernel.
  14. 896MB LOWMEM available.
  15. On node 0 totalpages: 229376
  16.   DMA zone: 4096 pages, LIFO batch:1
  17.   Normal zone: 225280 pages, LIFO batch:16
  18.   HighMem zone: 0 pages, LIFO batch:1
  19. DMI 2.2 present.
  20. Building zonelist for node : 0
  21. Kernel command line: BOOT_IMAGE=Linux ro root=341
  22. Found and enabled local APIC!
  23. Initializing CPU#0
  24. PID hash table entries: 4096 (order 12: 32768 bytes)
  25. Detected 2055.727 MHz processor.
  26. Using tsc for high-res timesource
  27. Console: colour VGA+ 80x25
  28. Memory: 905416k/917504k available (1331k kernel code, 11304k reserved, 569k data, 116k init, 0k highmem)
  29. Checking if this processor honours the WP bit even in supervisor mode... Ok.
  30. Calibrating delay loop... 4055.04 BogoMIPS
  31. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  32. Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  33. Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
  34. CPU:     After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
  35. CPU:     After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
  36. CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  37. CPU: L2 Cache: 512K (64 bytes/line)
  38. CPU:     After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
  39. Intel machine check architecture supported.
  40. Intel machine check reporting enabled on CPU#0.
  41. CPU: AMD Athlon(tm) XP 2800+ stepping 00
  42. Enabling fast FPU save and restore... done.
  43. Enabling unmasked SIMD FPU exception support... done.
  44. Checking 'hlt' instruction... OK.
  45. POSIX conformance testing by UNIFIX
  46. enabled ExtINT on CPU#0
  47. ESR value before enabling vector: 00000000
  48. ESR value after enabling vector: 00000000
  49. Using local APIC timer interrupts.
  50. calibrating APIC timer ...
  51. ..... CPU clock speed is 2055.0229 MHz.
  52. ..... host bus clock speed is 373.0678 MHz.
  53. NET: Registered protocol family 16
  54. PCI: PCI BIOS revision 2.10 entry at 0xfb4f0, last bus=2
  55. PCI: Using configuration type 1
  56. mtrr: v2.0 (20020519)
  57. PCI: Probing PCI hardware
  58. PCI: Probing PCI hardware (bus 00)
  59. PCI: Discovered primary peer bus ff [IRQ]
  60. PCI: Using IRQ router default [10de/01e0] at 0000:00:00.0
  61. spurious 8259A interrupt: IRQ7.
  62. Machine check exception polling timer started.
  63. Initializing Cryptographic API
  64. pty: 2048 Unix98 ptys configured
  65. Linux agpgart interface v0.100 (c) Dave Jones
  66. Machine check exception polling timer started.
  67. Initializing Cryptographic API
  68. pty: 2048 Unix98 ptys configured
  69. Linux agpgart interface v0.100 (c) Dave Jones
  70. agpgart: Detected NVIDIA nForce2 chipset
  71. agpgart: Maximum main memory to use for agp memory: 816M
  72. agpgart: AGP aperture is 128M @ 0xe0000000
  73. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
  74. ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
  75. NFORCE2: IDE controller at PCI slot 0000:00:09.0
  76. NFORCE2: chipset revision 162
  77. NFORCE2: not 100% native mode: will probe irqs later
  78. NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
  79. ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
  80. NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
  81.     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
  82.     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
  83. hda: WDC WD1200JB-00DUA1, ATA DISK drive
  84. hdb: QUANTUM FIREBALLlct20 20, ATA DISK drive
  85. Using anticipatory io scheduler
  86. ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
  87. hdc: CW099D ATAPI CD-R/RW, ATAPI CD/DVD-ROM drive
  88. hdd: TOSHIBA DVD-ROM SD-M1212, ATAPI CD/DVD-ROM drive
  89. ide1 at 0x170-0x177,0x376 on irq 15
  90. hda: max request size: 1024KiB
  91. hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
  92. hda: hda1 hda2 < hda5 >
  93. hdb: max request size: 128KiB
  94. hdb: 39876480 sectors (20416 MB) w/418KiB Cache, CHS=39560/16/63
  95. hdb: hdb1 hdb2 hdb3
  96. mice: PS/2 mouse device common for all mice
  97. serio: i8042 AUX port at 0x60,0x64 irq 12
  98. input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
  99. serio: i8042 KBD port at 0x60,0x64 irq 1
  100. input: AT Translated Set 2 keyboard on isa0060/serio0
  101. NET: Registered protocol family 2
  102. IP: routing cache hash table of 8192 buckets, 64Kbytes
  103. TCP: Hash tables configured (established 262144 bind 65536)
  104. NET: Registered protocol family 1
  105. NET: Registered protocol family 17
  106. kjournald starting.  Commit interval 5 seconds
  107. EXT3-fs: mounted filesystem with ordered data mode.
  108. VFS: Mounted root (ext3 filesystem) readonly.
  109. Freeing unused kernel memory: 116k freed
  110. Adding 979956k swap on /dev/hdb2.  Priority:-1 extents:1
  111. EXT3 FS on hdb1, internal journal
  112. Real Time Clock Driver v1.12
  113. kjournald starting.  Commit interval 5 seconds
  114. EXT3 FS on hdb3, internal journal
  115. EXT3-fs: mounted filesystem with ordered data mode.
  116. NTFS driver 2.1.6 [Flags: R/O MODULE].
  117. NTFS volume version 3.0.
  118. NTFS volume version 3.0.
  119. drivers/usb/core/usb.c: registered new driver usbfs
  120. drivers/usb/core/usb.c: registered new driver hub
  121. ehci_hcd 0000:00:02.2: EHCI Host Controller
  122. PCI: Setting latency timer of device 0000:00:02.2 to 64
  123. ehci_hcd 0000:00:02.2: irq 5, pci mem f88dd000
  124. ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
  125. PCI: cache line size of 64 is not supported by device 0000:00:02.2
  126. ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
  127. hub 1-0:1.0: USB hub found
  128. hub 1-0:1.0: 6 ports detected
  129. ohci_hcd: 2003 Oct 13 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
  130. ohci_hcd: block sizes: ed 64 td 64
  131. PCI: No IRQ known for interrupt pin A of device 0000:00:02.0. Please try using pci=biosirq.
  132. drivers/usb/core/hcd-pci.c: Found HC with no IRQ.  Check BIOS/PCI 0000:00:02.0 setup!
  133. PCI: No IRQ known for interrupt pin B of device 0000:00:02.1. Please try using pci=biosirq.
  134. drivers/usb/core/hcd-pci.c: Found HC with no IRQ.  Check BIOS/PCI 0000:00:02.1 setup!
  135. drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
  136. via-rhine.c:v1.10-LK1.1.19-2.5  July-12-2003  Written by Donald Becker
  137.   http://www.scyld.com/network/via-rhine.html
  138. eth0: VIA VT6102 Rhine-II at 0xb400, 00:50:ba:0d:1b:c9, IRQ 5.
  139. eth0: MII PHY found at address 8, status 0x7829 advertising 01e1 Link 45e1.
  140.                                                       eth0: Setting full-duplex based on MII #8 link partner capability of 45e1.
  141. forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.19.
  142. PCI: Setting latency timer of device 0000:00:04.0 to 64
  143. eth1: forcedeth.c: subsystem: 01695:1000 bound to 0000:00:04.0
  144. request_module: failed /sbin/modprobe -- char-major-4-64. error = 256
  145. Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
  146. ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  147. ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A


Reply

Marsh Posté le 28-02-2004 à 02:39:57    

pour la ram i ly a une option dans le kernel ?
 :sweat:
 
[resolu]
activer dans cpu feature, l option support 4 gb
 :sol:


Message édité par xiluoc le 28-02-2004 à 04:01:04
Reply

Marsh Posté le 28-02-2004 à 03:11:46    

en fait je crois que mon option du moduel ne sert a rien, c est un carte pci rocket 133 par un chipset inclu sur la mobo :/

Reply

Marsh Posté le 28-02-2004 à 08:30:21    

qd tu fait modprobe, il met quoi dans la console, les logs, etc .. ?
Ta carte c'est pour faire du raid, du sata, autre ?
 
As tu essayé d'autre peripherique ? comme scd ? ou autre ? hdb etc
 
De toute facon si elle marche sur knoppix y a pas de raison


Message édité par GUG le 28-02-2004 à 08:30:41
Reply

Sujets relatifs:

Leave a Replay

Make sure you enter the(*)required information where indicate.HTML code is not allowed