Bonjour à tous !
 
Voila j'ai récemment installer Linux sur mon portable (Fedora Core 4) et je suis confronté à un problème. Aparemment, le système n'arrive pas à allouer de "région" à ma carte Wifi (Winbond w89c33). J'ai également une partition avec Windows et la pas de souci. Je souhaiterai donc savoir si quelqu'un sait comment résoudre les erreurs du type Can't allocate region X of device ..
Merci beaucoup !

C'est une carte integrée au portable, ou une carte pcmcia ?
 
T'aurais pas un log pour voir exactement ce qu'il se passe au moment de la detection de la carte ?

 
Oui c'est une carte intégrée (pas pcmcia). COmment puis-je avoir les inscriptions envoyées par le noyau au démarrage ? Car c'est à ce moment la que je vois que le noyau ne la veut pas...
 
Merci !

commande "dmesg" ou va voir dans /var/log/syslog.

Merci, Alors, voici le résultat de dsmeg :
 
Linux version 2.6.13-1.1532_FC4 (bhcompile@tweety.build.redhat.com) (gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)) #1 Thu Oct 20 01:30:08 EDT 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000dfef000 (usable)
 BIOS-e820: 000000000dff0000 - 000000000dffffc0 (ACPI data)
 BIOS-e820: 000000000dffffc0 - 000000000e000000 (ACPI NVS)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
223MB LOWMEM available.
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 57327
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 53231 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 OID_00                                ) @ 0x000e6010
ACPI: RSDT (v001 INSYDE FACP_000 0x00000100 0000 0x00010200) @ 0x0dffc2a0
ACPI: FADT (v001 INSYDE FACP_000 0x00000100 0000 0x00010200) @ 0x0dfffb00
ACPI: MADT (v001 INSYDE APIC_000 0x30303030 0000 0x00010200) @ 0x0dfffb90
ACPI: DSDT (v001 INSYDE    PN800 0x00001000 INTL 0x02002036) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 0e000000 (gap: 0e000000:f1f80000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/ rhgb quiet
Initializing CPU#0
CPU 0 irqstacks, hard=c04e7000 soft=c04e6000
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 1293.902 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 221296k/229308k available (3085k kernel code, 7456k reserved, 704k data, 176k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2593.28 BogoMIPS (lpj=5186579)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: a7e9fbbf 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: a7e9fbbf 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 512K
CPU: After all inits, caps: a7e9f3bf 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: Intel(R) Celeron(R) M processor         1300MHz stepping 05
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0ca0)
checking if image is initramfs... it is
Freeing initrd memory: 1091k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xe9bf4, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC0] (gpe 1)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 23) *11
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *5, disabled.
    ACPI-0229: *** Error: Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node c11fdf00), AE_TYPE
ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 8 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:00:06.0
PCI: Cannot allocate resource region 1 of device 0000:00:06.0
PCI: Cannot allocate resource region 2 of device 0000:00:06.0
pnp: 00:06: ioport range 0x330-0x331 has been reserved
pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:06: ioport range 0x1000-0x107f could not be reserved
pnp: 00:06: ioport range 0x1400-0x140f has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: c000-dfff
  MEM window: c0000000-cfffffff
  PREFETCH window: 90000000-9fffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1129915090.528:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key EEDDDBBBC3364C64
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 16 throttling states)
ACPI: Thermal Zone [TZ0] (0 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset
agpgart: AGP aperture is 128M @ 0xa0000000
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 32 ports, IRQ sharing enabled
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Via IRQ fixup for 0000:00:11.1, from 0 to 11
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
    ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: SAMSUNG MP0402H, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hda: max request size: 1024KiB
hda: 78242976 sectors (40060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3 < hda5 hda6 hda7 >
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.38
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 5, 229376 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI wakeup devices:  
SBTN  LAN AC97 MC97  KBC  
ACPI: (supports S0 S1 S3 S4 S4bios S5)
Freeing unused kernel memory: 176k freed
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa56eb1, caps: 0x804713/0x0
input: SynPS/2 Synaptics TouchPad on isa0060/serio3
floppy0: no floppy controllers found
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
eth0: VIA Rhine II at 0xd0000000, 00:40:d0:71:a8:3e, IRQ 11.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
via82xx: Assuming DXS channels with 48k fixed sample rate.
         Please try dxs_support=5 option
         and report if it works on your machine.
         For more details, read ALSA-Configuration.txt.
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:11.5 to 64
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:11.6 to 64
PCI: Enabling device 0000:00:10.3 (0000 -> 0002)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.3: irq 10, io mem 0x0e000200
ehci_hcd 0000:00:10.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 11, io base 0x00001200
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 7 (level, low) -> IRQ 7
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 7, io base 0x00001220
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 5, io base 0x00001240
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-4: new high speed USB device using ehci_hcd and address 2
NET: Registered protocol family 10
Disabled Privacy Extensions on device c04756a0(lo)
IPv6 over IPv4 tunneling driver
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
  Vendor: MATSHITA  Model: CD-RW  CW-8124    Rev: DZ13
  Type:   CD-ROM                             ANSI SCSI revision: 00
usb-storage: device scan complete
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SBTN]
ACPI: Power Button (CM) [PBTN]
ibm_acpi: ec object not found
ACPI: Video Device [VGA0] (multi-head: yes  rom: no  post: no)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
EXT3 FS on hda5, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 497972k swap on /dev/hda6.  Priority:-1 extents:1
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.7
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.5
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
lp: driver loaded but no devices found
eth0: no IPv6 routers present
application mixer_applet2 uses obsolete OSS audio interface
ndiswrapper version 1.4 loaded (preempt=no,smp=no)
ndiswrapper: driver netw33 (Winbond Electronics Corp.,03/25/2005,1.2.47.1001) loaded
PCI: Enabling device 0000:00:06.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:06.0[A]: no GSI
ndiswrapper (NdisMRegisterInterrupt:1595): shared but dynamic interrupt!
ndiswrapper: request for irq 0 failed
ndiswrapper (ndiswrapper_add_pci_device:221): Windows driver couldn't initialize the device (00000000)
ndiswrapper: probe of 0000:00:06.0 failed with error -22
 
Voila, j'espère que cela vous permettra de m'aider !
 
Merci beaucoup en tout cas.

au démarrage de grub, tente un pci=noirq à la ligne du kernel pour voir.

arf, il me met PCI:Unknown option 'noirq'

arf désolé je crois que c'est la commande avec lilo.
Et pourtant j'utilise grub    
 
tente acpi=noirq alors.

hihi, pas de souci macfennec !
J'ai essayé acpi=noirq, le message apparait toujours au démarrage et le wifi n'est toujours pas activé.
 
ndiswrapper version 1.4 loaded (preempt=no,smp=no)  
ndiswrapper: driver netw33 (Winbond Electronics Corp.,03/25/2005,1.2.47.1001) loaded  
PCI: Enabling device 0000:00:06.0 (0000 -> 0003)  
ACPI: PCI Interrupt 0000:00:06.0[A]: no GSI  
ndiswrapper (NdisMRegisterInterrupt:1595): shared but dynamic interrupt!  
ndiswrapper: request for irq 0 failed  
ndiswrapper (ndiswrapper_add_pci_device:221): Windows driver couldn't initialize the device (00000000)  
ndiswrapper: probe of 0000:00:06.0 failed with error -22

Peut etre en essayant d'attribuer toi même un irq à ta carte wireless. mais je ne sais pas comment faire cela.
 
Bonne chance à toi

Ok, merci beaucoup de ton aide en tout cas ! Je reposte dès que j'ai des news !

Je viens d'essayer de passaer paramètres sur paramètres au noyau (à l'aide de http://guide.andesi.org/html/moptions-noyau.html) mais rien ne marche
Si quelqu'un a une autre idée, elle est la bienvenue. Ca m'embeterai vraiment d'acheter une clé wifi alors ke j'ai un controleur dans l'ordinateur....

c'est un bug il me semble,
j'ai la meme chose avec un 2.6.14 et un hpnw8240, dautre possesseur de hp on rapporter cette erreur