D'ou peut venir mes crashs ?

D'ou peut venir mes crashs ? - Divers - Linux et OS Alternatifs

Marsh Posté le 15-09-2008 à 10:45:06    

Bonjour
 
Depuis quelques temps, mon pc n'arrête pas de planter et je ne sais pas d'ou cela peut venir.
Lorsque cela arrive, j'ai l'ecran qui reste figé. si je bouge la souris ou si j'utilise la clavier, rien ne change.
Même si je fait un CTRL + ALT + DEL ou CTRL + ALT + F1
 
J'utilise ubuntu 8.04 sous gnome.
 
voici ce que j'ai trouvé dans la log de gdm :  

root@sempron:/var/log/gdm# more \:0.log.4
 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
 
X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux Ubuntu (xorg-server 2:1.4.1~git20080131-1ubuntu9.2)
Current Operating System: Linux sempron 2.6.24-19-generic #1 SMP Wed Aug 20 22:56:21 UTC 2008 i686
Build Date: 13 June 2008  01:08:21AM
 
 Before reporting problems, check http://wiki.x.org
 to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
 (++) from command line, (!!) notice, (II) informational,
 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep 14 09:21:31 2008
(==) Using config file: "/etc/X11/xorg.conf"
(WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found
WARNING: /etc/modprobe.d/blacklist line 40: ignoring bad line starting with 'blacklit'
(II) Module "ddc" already built-in
(II) Module "i2c" already built-in
NTSC PAL  
finished output detect: 0
finished output detect: 1
finished output detect: 2
finished all detect
before xf86InitialConfiguration
in RADEONProbeOutputModes
after xf86InitialConfiguration
(II) Module "ramdac" already built-in
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable montype: 1
disable montype: 1
init memmap
init common
init crtc1
init pll1
freq: 108000000
best_freq: 108000000
best_feedback_div: 96
best_ref_div: 12
best_post_div: 2
restore memmap
restore common
restore crtc1
restore pll1
finished PLL1
restore dac
enable montype: 1
disable montype: 1
expected keysym, got XF86KbdLightOnOff: line 70 of pc
expected keysym, got XF86KbdBrightnessDown: line 71 of pc
expected keysym, got XF86KbdBrightnessUp: line 72 of pc
expected keysym, got XF86KbdLightOnOff: line 70 of pc
expected keysym, got XF86KbdBrightnessDown: line 71 of pc
expected keysym, got XF86KbdBrightnessUp: line 72 of pc
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
enable montype: 1
in RADEONProbeOutputModes
in RADEONProbeOutputModes
in RADEONProbeOutputModes
in RADEONProbeOutputModes
SetClientVersion: 0 9
in RADEONProbeOutputModes
*********************************WARN_ONCE*********************************
File r300_mem.c function r300_mem_alloc line 225
Ran out of GART memory (for 1048576)!
Please consider adjusting GARTSize option.
***************************************************************************
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetGrabKeysState - disabled
enable montype: 1
disable montype: 1
disable montype: 1
enable montype: 1
disable montype: 1
enable montype: 1
enable montype: 1
SetGrabKeysState - enabled
SetGrabKeysState - disabled
enable montype: 1
disable montype: 1
disable montype: 1
enable montype: 1
enable montype: 1
SetGrabKeysState - enabled
SetGrabKeysState - disabled
enable montype: 1
disable montype: 1
disable montype: 1
enable montype: 1
enable montype: 1
SetGrabKeysState - enabled
SetGrabKeysState - disabled
SetGrabKeysState - enabled
SetGrabKeysState - disabled
enable montype: 1
disable montype: 1
disable montype: 1
enable montype: 1
disable montype: 1
enable montype: 1
enable montype: 1
SetGrabKeysState - enabled
SetGrabKeysState - disabled
enable montype: 1
disable montype: 1
disable montype: 1
enable montype: 1
enable montype: 1
SetGrabKeysState - enabled
SetGrabKeysState - disabled
enable montype: 1
disable montype: 1
disable montype: 1
enable montype: 1
enable montype: 1
SetGrabKeysState - enabled
SetGrabKeysState - disabled
enable montype: 1
disable montype: 1
disable montype: 1
enable montype: 1
disable montype: 1
enable montype: 1
enable montype: 1
SetGrabKeysState - enabled
enable montype: 1
enable montype: 1
enable montype: 1
 
Backtrace:
0: /usr/bin/X(xf86SigHandler+0x7e) [0x80c780e]
1: [0xb7f06420]
2: /usr/lib/xorg/modules//libxaa.so [0xb78cc5b9]
3: /usr/bin/X [0x8173013]
4: /usr/bin/X(CompositePicture+0x150) [0x815a1f0]
5: /usr/bin/X [0x81601df]
6: /usr/bin/X [0x815d085]
7: /usr/bin/X [0x81506ee]
8: /usr/bin/X(Dispatch+0x2cf) [0x808d8df]
9: /usr/bin/X(main+0x48b) [0x807471b]
10: /lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xe0) [0xb7c9e450]
11: /usr/bin/X(FontFileCompleteXLFD+0x201) [0x8073a91]
 
Fatal server error:
[#f0000e]Caught signal 11.  Server aborting[/#f0000e]
 
disable montype: 1
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV


 
Une idée ?


---------------
http://www.starbusiness.fr : jeux en ligne bientôt Massivement Multi Joueur. Gestion et Wargame dans un univers à la conquête de l'espace ...
Reply

Marsh Posté le 15-09-2008 à 10:45:06   

Reply

Marsh Posté le 15-09-2008 à 10:51:52    

Bonjour,
As-tu vérifier si ta ram était OK ?
Installe memtest, et lance le test depuis grub.
As tu essayer de ne pas lancer l'interface graphique, pour voir si le soucis apparaissait lorsque Xorg était lancé ?
As-tu essayer de changer le driver vidéo configuré dans /etc/X11/xorg.conf pour un driver plus générique ?
 


---------------
Les avis, c'est comme les anus, tout le monde en a un.
Reply

Marsh Posté le 15-09-2008 à 23:47:40    

Bonsoir
 
j'ai vérifie la ram est tous semble bon. j'ai été jusqu'au test 5 et à 37 % du test. Pour le driver de La carte graphique, j'ai mis ce matin le driver proprio et ce soir j'ai le problème.
Par contre le plantage intervient de façon assez aléatoire, et cela peut mettre du temps à venir. Je ne pense pas pouvoir tester suffisamment longtement sans interface graphique.
D'autre idées ?


---------------
http://www.starbusiness.fr : jeux en ligne bientôt Massivement Multi Joueur. Gestion et Wargame dans un univers à la conquête de l'espace ...
Reply

Marsh Posté le 15-09-2008 à 23:58:26    

Lorsque je pc plante, il ne répond plus au ping d'un autre poste alors qu'en temps normal, il répond.
je pense que cela vient d'une couche bas niveau ... mais c'est juste une intuition.


---------------
http://www.starbusiness.fr : jeux en ligne bientôt Massivement Multi Joueur. Gestion et Wargame dans un univers à la conquête de l'espace ...
Reply

Marsh Posté le 16-09-2008 à 09:54:02    

essaye juste d'utiliser le driver vesa pour voir si tu as toujours des problèmes, les drivers radeon qu'ils soient libres ou proprio ne brillent pas par leur stabilité sur certaines cartes.

Reply

Marsh Posté le 16-09-2008 à 18:54:47    

Salut,
Et a ce stade il ne faut pas encore abandonner la piste hardware, j'ai fait l'expérience de soucis complètement identiques et en fait ça venait de mon alimentation...jamais je n'aurais pensé a ça, sauf que un jour le PC n'a plus booté du tout, là je me suis dit c'est bizarre quand meme...remplacement de la dite alim. et c'était reparti :o
 
Bon dans mon cas c'était vraiment une alim de merde il faut bien l'avouer.
 
Et vérifie tes températures (processeurs, carte graphique), on ne sait jamais.


Message édité par trouble_fete le 16-09-2008 à 18:55:11

---------------
Tyan Tiger 200T, SDR PC 133, 1*256Mo, Bi-Tualatin 1,4Ghz, disque Maxtor 6Y080L0 IDE 80Go, FX 5200 en format PCI, modem/routeur DSL-524T, le tout sous Gentoo
Reply

Sujets relatifs:

Leave a Replay

Make sure you enter the(*)required information where indicate.HTML code is not allowed