grveur de cd liteon marchant seulement avec des rw ???

grveur de cd liteon marchant seulement avec des rw ??? - CD/DVD/BD - Hardware

Marsh Posté le 30-04-2004 à 23:23:12    

salut a tous  
J'ai un probleme avec mon graveur de cd  
il n'accepte pas de graver les cd-r
alors que les rw il n'y a pas de probleme  
je ne comprend pas  
si vous avez des ideés merci par avance
def29
 
ps cijoint rapport de nero pour un echec de gravure
 
 
 
Windows 98 4.90 (ME)
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 08/06/2000 17:00:00  
Nero Version: 5.5.9.13 (Nero Express)
Recorder:             <LITE-ON LTR-48246S>      Version: SS0E - HA 0 TA 1 - 5.5.9.13
 Adapter driver:      <ESDI_506>               HA 0
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI  
CD-ROM:               <BDV 108A  DVDROM 00/03/21>Version: 2.00 - HA 0 TA 0 - 5.5.9.13
 Adapter driver:      <ESDI_506>               HA 0
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI  
BDV 108A  DVDROM 00/03/21 (Target 0, E:): Autoinsert On, DMA On, Disconnect On, SyncDataXfer Off
LITE-ON LTR-48246S (Target 1, F:): Autoinsert On, DMA On, Disconnect On, SyncDataXfer Off
Excluded drive IDs:  
CmdQueuing     : 1
CmdNotification: 2
WriteBufferSize: 28311552 (0) Byte
ShowDrvBufStat : 0
EraseSpeed     : 0
BUFE           : 0
Physical memory     : 191MB (196024kB)
Free physical memory: 1MB (1992kB)
Memory in use       : 75 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)  
Wizard: Off
 
30.4.2004
CD-ROM (ISO)
10:17:59 #1 Text 0 File Isodoc.cpp, Line 6874
 Iso document burn settings
 ------------------------------------------
 Determine maximum speed : FALSE
 Simulate                : FALSE
 Write                   : TRUE
 Finalize CD             : TRUE
 Multisession            : FALSE
 Burning mode            : TAO
 Mode                    : 1
 ISO Level               : 1 (Max. of 11 = 8 + 3 char)
 Character set           : ISO 9660
 Joliet                  : TRUE
 Allow pathdepth more than 8 directories : TRUE
 Allow more than 255 characters in path  : TRUE
 Write ISO9660 ;1 file extensions        : TRUE
 
10:17:59 #2 Phase 90 File dlgbrnst.cpp, Line 1571
 Buffer Underrun Protection activated
 
10:17:59 #3 Text 0 File Reader.cpp, Line 118
 Reader running
 
10:17:59 #4 Text 0 File Writer.cpp, Line 134
 Writer LITE-ON  LTR-48246S       running
 
10:17:59 #5 ISO9660GEN -11 File geniso.cpp, Line 4487
 First writeable address = 0 (0x00000000)
 
10:17:59 #6 Text 0 File Burncd.cpp, Line 3568
 Turn on Track-At-Once, using CD-R/RW media
 
10:17:59 #7 Text 0 File ThreadedTransferInterface.cpp, Line 666
 Setup items (original item values)
  0: TRM_DATA_MODE1 (CTransferItem)
     2 indices, index0 (150) not provided
     original CD pos #0 + 353977 (353977) = #353977/78:39.52
     relocatable, CD pos for caching/writing not required/required, no patch infos  
 --------------------------------------------------------------
 
10:18:00 #8 Text 0 File DlgWaitCD.cpp, Line 202
 Last possible write address on media:   359848 (79:59.73)
 Last address to be written:             353976 (78:41.51)
 
10:18:00 #9 Text 0 File DlgWaitCD.cpp, Line 207
 Write in overburning mode: FALSE
 
10:18:00 #10 Text 0 File DlgWaitCD.cpp, Line 1407
 Recorder:  LITE-ON LTR-48246S;
    CDRW code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
    ATIP Data:
      Special    Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
      Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
 
10:18:00 #11 Text 0 File ThreadedTransferInterface.cpp, Line 818
 Prepare recorder LITE-ON  LTR-48246S       for write in TAO
 DAO infos:
 ==========
 MCN:  
 TOCTYPE: 0x0   Close CD
 Tracks 1 to 1:
    TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 725252096
 
10:18:00 #12 Text 0 File ThreadedTransferInterface.cpp, Line 846
 Removed 2 run-out blocks from end of track 1.
 
10:18:00 #13 Text 0 File ThreadedTransferInterface.cpp, Line 666
 Setup items (after recorder preparation)
  0: TRM_DATA_MODE1 (CTransferItem)
     2 indices, index0 (150) not provided
     original CD pos #0 + 353977 (353977) = #353977/78:39.52
     relocatable, CD pos for caching/writing not required/required, no patch infos  
     -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 353975 blocks [LITE-ON  LTR-48246S      ]
 --------------------------------------------------------------
 
10:18:00 #14 Phase 36 File dlgbrnst.cpp, Line 1571
 Burn process started at 48x (7 200 Ko/s)
 
10:18:00 #15 Phase 109 File dlgbrnst.cpp, Line 1571
 Warning: Disabling SMART-BURN function may result in writing errors and impact on the quality of disc recorded.
 
10:18:00 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1950
 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
 
10:18:00 #17 Text 0 File Mmc.cpp, Line 17050
 Set BUFE: supported -> ON , SMART-BURN : OFF
 
10:19:34 #18 Text 0 File Scsicmd.cpp, Line 1935
 SCSI timeout (2), 90000ms, CDB Data[hex]: 2A 00 00 00 00 00 00 00 1F 00 00 00
 
10:19:34 #19 CDR -1175 File Cdrdrv.cpp, Line 1329
 Internal trace
 Command timeout occured: timeout 90000ms, counter 1
  CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00
 
 
10:19:34 #20 SCSI -26 File Cdrdrv.cpp, Line 1360
 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x044C0000
 Status:     0x00 (0x02, SCSI_PENDING)
 HA-Status   0x00 (0x00, OK)
 TA-Status   0x00 (0x00, OK)
 Sense Key:  0x00 (KEY_NO_SENSE)
 Sense Code: 0x00
 Sense Qual: 0x00
 CDB Data:   0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00  
 Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00  
             0x00 0x00 0x00 0x00 0x00 0x00  
 
10:19:34 #21 SCSI -26 File Cdrdrv.cpp, Line 1415
 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x044C0000
 Status:     0x00 (0x02, SCSI_PENDING)
 HA-Status   0x00 (0x00, OK)
 TA-Status   0x00 (0x00, OK)
 Sense Key:  0x00 (KEY_NO_SENSE)
 Sense Code: 0x00
 Sense Qual: 0x00
 CDB Data:   0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00  
 Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00  
             0x00 0x00 0x00 0x00 0x00 0x00  
 
10:19:34 #22 CDR -26 File Writer.cpp, Line 342
 SCSI/ATAPI command timeout error
 
10:19:34 #23 Text 0 File ThreadedTransfer.cpp, Line 222
 all writers idle, stopping conversion
 
10:19:34 #24 Text 0 File ThreadedTransfer.cpp, Line 216
 conversion idle, stopping reader
 
10:19:44 #25 Text 0 File Scsicmd.cpp, Line 1935
 SCSI timeout (2), 10000ms, CDB Data[hex]: 35 00 00 00 00 00 00 00 00 00 00 00
 
10:19:44 #26 SCSI -1000 File Cdrdrv.cpp, Line 1211
 SCSI Exec, HA 0, TA 1, LUN 0
 Status:     0x00 (0x02, SCSI_PENDING)
 HA-Status   0x00 (0x00, OK)
 TA-Status   0x00 (0x00, OK)
 Sense Key:  0x00 (KEY_NO_SENSE)
 Sense Code: 0x00
 Sense Qual: 0x00
 CDB Data:   0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00  
 Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00  
             0x00 0x00 0x00 0x00 0x00 0x00  
 
10:19:44 #27 CDR -1175 File Cdrdrv.cpp, Line 1227
 Internal trace
 Command timeout occured: timeout 10000ms, counter 1
  CDB Data[hex]: 35 00 00 00 00 00 00 00 00 00 00 00
 
 
10:19:44 #28 SCSI -26 File Cdrdrv.cpp, Line 1255
 SCSI Exec, HA 0, TA 1, LUN 0
 Status:     0x00 (0x02, SCSI_PENDING)
 HA-Status   0x00 (0x00, OK)
 TA-Status   0x00 (0x00, OK)
 Sense Key:  0x00 (KEY_NO_SENSE)
 Sense Code: 0x00
 Sense Qual: 0x00
 CDB Data:   0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00  
 Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00  
             0x00 0x00 0x00 0x00 0x00 0x00  
 
10:21:03 #29 CDR -1000 File WriterStatus.cpp, Line 185
 SCSI/IDE error
 
10:21:03 #30 TRANSFER -18 File WriterStatus.cpp, Line 185
 Could not perform EndTrack
 
10:21:03 #31 CDR -201 File WriterStatus.cpp, Line 188
 Invalid write state
 
10:21:03 #32 TRANSFER -18 File WriterStatus.cpp, Line 188
 Could not perform EndTrack
 
10:21:04 #33 Phase 38 File dlgbrnst.cpp, Line 1571
 Burn process failed at 48x (7 200 Ko/s)
 
10:21:04 #34 Text 0 File Scsicmd.cpp, Line 402
 SCSI not using temporary buffers
 20 out of 20 temporary buffers allocated
 
 
Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 08/06/2000 17:00:00  
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11/03/2002 11:55:38  
File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 27/04/2004 09:25:58  
File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 27/04/2004 09:25:58  
File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 03/03/2001 04:55:54  
File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 08/06/2000 17:00:00  
File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 08/06/2000 17:00:00  
File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 08/06/2000 17:00:00  
File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 08/06/2000 17:00:00  
File '..\System32\Drivers\Ntmap.sys': Ver=4.90.3000, size=8704 bytes, created 08/06/2000 17:00:00  
File 'IoSubsys\Ntmaphlp.pdr': Ver=4.90.3000, size=12917 bytes, created 08/06/2000 17:00:00  
File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 08/06/2000 17:00:00  
File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 08/06/2000 17:00:00  
 
 
 

Reply

Marsh Posté le 30-04-2004 à 23:23:12   

Reply

Marsh Posté le 01-05-2004 à 00:21:20    

Quelques pistes :
 
Vire tous les aspi de ton système et installe celui de Nero dans le répertoire Nero.
http://www.ahead.de/en/631940726723078.html
 
Installes la dernière version des Via 4 en 1
 
Change de media
 
Upgrade à la dernière version de Nero

Reply

Marsh Posté le 01-05-2004 à 14:33:58    

merci pour tes conseils haxel et ca marche maintenant
j'ai juste utilisé un autre logiciel de gravure  (alcohol 120) si un autre logiciel et plus apte a me servir merci par avance  
def29

Reply

Sujets relatifs:

Leave a Replay

Make sure you enter the(*)required information where indicate.HTML code is not allowed