Windows XP 5.1  
IA32  
WinAspi: -  
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 17:33:44  
Nero version: 6.3.1.25  
Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS02 - HA 1 TA 0 - 6.3.1.25  
Adapter driver: <atapi> HA 1  
Drive buffer : 2048kB  
Bus Type : default (0) -> ATAPI, detected: ATAPI  
CD-ROM: <VOBID InstantDrive CD >Version: 14 - HA 2 TA 0 - 6.3.1.25  
Adapter driver: <VOBID> HA 2  
 
=== Scsi-Device-Map ===  
DiskPeripheral : ST340823A atapi Port 0 ID 0 DMA: On  
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 1 ID 0 DMA: On  
CdRomPeripheral : VOBID InstantDrive CD 14 VOBID Port 2 ID 0 DMA: Off  
 
=== CDRom-Device-Map ===  
TSSTcorp CD/DVDW TS-H552 D: CDRom0  
VOBID InstantDrive CD E: CDRom2  
=======================  
 
AutoRun : 1  
Excluded drive IDs:  
WriteBufferSize: 24117248 (0) Byte  
ShowDrvBufStat : 0  
BUFE : 0  
Physical memory : 127MB (130544kB)  
Free physical memory: 6MB (6544kB)  
Memory in use : 94 %  
Uncached PFiles: 0x0  
Use Static Write Speed Table: 0  
Use Inquiry : 1  
Global Bus Type: default (0)  
Check supported media : Disabled (0)  
 
10.10.2004  
Burn DVD Image  
23:21:59 #1 Text 0 File Reader.cpp, Line 126  
Reader running  
 
23:21:59 #2 Text 0 File Writer.cpp, Line 124  
Writer TSSTcorp CD/DVDW TS-H552B running  
 
23:21:59 #3 Text 0 File Burncd.cpp, Line 3152  
Turn on Disc-at-once, using DVD media  
 
23:21:59 #4 Text 0 File DlgWaitCD.cpp, Line 247  
Last possible write address on media: 2298495 (510:46.45, 4489MB)  
Last address to be written: 1325572 (294:34.22, 2589MB)  
 
23:21:59 #5 Text 0 File DlgWaitCD.cpp, Line 259  
Write in overburning mode: NO (enabled: CD)  
 
23:21:59 #6 Text 0 File DlgWaitCD.cpp, Line 2162  
Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R  
Disc Manufacturer: MCC 01 - RG20  
Disc Application Code: 64, Disc Physical Code: 193  
 
23:21:59 #7 Text 0 File DlgWaitCD.cpp, Line 420  
>>> Protocol of DlgWaitCD activities: <<<  
=========================================  
 
23:21:59 #8 Text 0 File ThreadedTransferInterface.cpp, Line 813  
Setup items (after recorder preparation)  
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)  
2 indices, index0 (150) not provided  
original disc pos #0 + 1325573 (1325573) = #1325573/294:34.23  
not relocatable, disc pos for caching/writing not required/not required, no patch infos  
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1325573 blocks [TSSTcorp CD/DVDW TS-H552B]  
--------------------------------------------------------------  
 
23:21:59 #9 Text 0 File ThreadedTransferInterface.cpp, Line 984  
Prepare recorder [TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO  
DAO infos:  
==========  
MCN: ""  
TOCType: 0x00; Session Closed, disc not fixated  
Tracks 1 to 1:  
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2714773504, ISRC ""  
DAO layout:  
===========  
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_  
0 | lead-in | 0 | 0x00 | 0x41  
0 | 1 | 0 | 0x00 | 0x41  
0 | 1 | 1 | 0x00 | 0x41  
1325573 | lead-out | 1 | 0x00 | 0x41  
 
23:22:00 #10 Phase 24 File dlgbrnst.cpp, Line 1855  
Caching of files started  
 
23:22:00 #11 Text 0 File Burncd.cpp, Line 4163  
Cache writing successful.  
 
23:22:00 #12 Phase 25 File dlgbrnst.cpp, Line 1855  
Caching of files completed  
 
23:22:00 #13 Phase 32 File dlgbrnst.cpp, Line 1855  
Simulation started at 2x (2 770 KB/s)  
 
23:22:00 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2344  
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0  
 
23:22:00 #15 Text 0 File dlgbrnst.cpp, Line 1713  
Set remaining time: 16:42,017 (1002017ms) -> OK  
 
23:22:00 #16 Text 0 File DVDR.cpp, Line 2000  
Recording mode: Sequential Recording Mode for Multisession  
 
23:22:00 #17 Text 0 File Mmc.cpp, Line 20660  
Set BUFE: Super Link -> ON  
 
23:22:00 #18 Text 0 File DVDR.cpp, Line 2141  
Start write address at LBA 0  
DVD high compatibility mode: Yes  
 
23:22:00 #19 Text 0 File Cdrdrv.cpp, Line 8230  
---- DVD Structure: Physical Format Information (00h) ----  
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050  
Book Type: DVD-R (2), Part Version: 5  
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)  
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable  
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track  
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)  
End Physical Sector Number of Data Area: 0 h  
End Sector Number in Layer 0: 0 h  
Data in Burst Cutting Area (BCA) does not exist  
Start sector number of the current Border-Out: 0 h  
Start sector number of the next Border-In: 0 h  
Media Specific [16..63]:  
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................  
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................  
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................  
 
23:22:03 #20 Text 0 File Cdrdrv.cpp, Line 1297  
23:22:03.885 - TSSTcorp CD/DVDW TS-H552B\H1 T0 : Queue again later  
 
23:38:28 #21 Text 0 File WriterStatus.cpp, Line 115  
<TSSTcorp CD/DVDW TS-H552B> start writing Lead-Out at LBA 1325573 (143A05h), lenght 0 blocks  
 
23:38:28 #22 Text 0 File ThreadedTransfer.cpp, Line 229  
all writers idle, stopping conversion  
 
23:38:28 #23 Text 0 File DVDR.cpp, Line 2383  
EndDAO: Last written address was 1325583  
 
23:38:32 #24 Phase 133 File dlgbrnst.cpp, Line 1855  
Writing short lead-out  
 
23:39:53 #25 Text 0 File dlgbrnst.cpp, Line 1713  
Set remaining time: 0:00,000 (0ms) -> OK  
 
23:39:53 #26 Text 0 File dlgbrnst.cpp, Line 1713  
Set remaining time: 0:00,000 (0ms) -> OK  
 
23:39:53 #27 Phase 33 File dlgbrnst.cpp, Line 1855  
Simulation completed successfully at 2x (2 770 KB/s)  
 
23:39:54 #28 Phase 36 File dlgbrnst.cpp, Line 1855  
Burn process started at 2x (2 770 KB/s)  
 
23:39:54 #29 Text 0 File ThreadedTransferInterface.cpp, Line 2344  
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0  
 
23:39:54 #30 Text 0 File dlgbrnst.cpp, Line 1713  
Set remaining time: 16:42,017 (1002017ms) -> OK  
 
23:39:54 #31 Text 0 File DVDR.cpp, Line 2000  
Recording mode: Sequential Recording Mode for Multisession  
 
23:39:54 #32 Text 0 File Mmc.cpp, Line 20660  
Set BUFE: Super Link -> ON  
 
23:39:54 #33 Text 0 File DVDR.cpp, Line 2141  
Start write address at LBA 1372704  
DVD high compatibility mode: Yes  
 
23:39:54 #34 Text 0 File Cdrdrv.cpp, Line 8230  
---- DVD Structure: Physical Format Information (00h) ----  
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050  
Book Type: DVD-R (2), Part Version: 5  
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)  
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable  
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track  
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)  
End Physical Sector Number of Data Area: 173A0F h  
End Sector Number in Layer 0: 0 h  
Data in Burst Cutting Area (BCA) does not exist  
Start sector number of the current Border-Out: 173A20 h  
Start sector number of the next Border-In: 17F1C0 h  
Media Specific [16..63]:  
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................  
00 17 3A 20 00 17 F1 C0 - 00 00 00 00 00 00 00 00 ..:.............  
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................  
 
23:39:54 #35 SCSI -1066 File Cdrdrv.cpp, Line 1191  
SCSI Exec, HA 1, TA 0, LUN 0  
Status: 0x04 (0x01, SCSI_ERR)  
HA-Status 0x00 (0x00, OK)  
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)  
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)  
Sense Code: 0x24  
Sense Qual: 0x00  
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x14 0x3A 0x10 0x00 0x00 0x00  
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A  
0x00 0x00 0x00 0x00 0x24 0x00  
 
23:39:54 #36 CDR -1066 File ThreadedTransferInterface.cpp, Line 1614  
Invalid field in command  
 
23:39:54 #37 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614  
Could not perform start of Disc-at-once  
 
23:39:54 #38 Text 0 File dlgbrnst.cpp, Line 1713  
Set remaining time: 0:00,000 (0ms) -> OK  
 
23:39:54 #39 Phase 38 File dlgbrnst.cpp, Line 1855  
Burn process failed at 2x (2 770 KB/s)  
 
 
Existing drivers:  
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 16/06/2004 00:00:00  
File 'Drivers\PXHELP20.SYS': Ver=2.02.39a, size=16288 bytes, created 25/09/2002 02:02:00 (Prassi/Veritas driver for win 2K)  
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86656 bytes, created 28/08/2001 14:00:00 (Adapter driver for rec)  
File 'Drivers\vobid.sys': Ver=1, 1, 0, 20, size=29239 bytes, created 01/08/2003 14:47:24 (Adapter driver for src)  
 
Registry Keys:  
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)